
4
Activating an SOS Alarm
To activate SOS alarm, press the side button for 3 seconds until you feel the watch
vibrate.
• After SOS alarm is activated, you will hear a voice prompt confirming the
activation of the SOS alert and allowing you approximately 10 seconds to cancel
the alarm. If the SOS is not cancelled in time an SOS alert text message is
immediately sent to the emergency contact numbers followed by the outgoing
calls.
• If the watch fails to connect to the first number, it will call the second number
after delay of 10 seconds. In case the second number fails to be connected as
well, the system will connect to the third number etc.
• Between each call, it will have 10 seconds delay, during this time, user can stop
call sequence or prevent a possible false alarm by pressing SOS button.
Fall Alarm
The watch can automatically detect a fall. When this occurs the watch will give a
warning message to the user.
• Some daily activities like sports or even sitting down abruptly can trigger the fall
alarm.
• The wearer has a short time to cancel a fall alarm by clicking the Cancel on the
watch. If the alarm is not cancelled, emergency contacts will be called.
TIP It is possible that the watch will not detect every real fall. We strongly advise
the wearer to press the SOS button in any emergency situation, if they are able.