Tunturi Pure Weight bench User manual

WEIGHT BENCH
140414
GB
IMPORTANT: Please read this manual before commencing assembly of this product.
NL BELANGRIJKE: Lees deze handleiding aandachtig door alvorens dit product te monteren.
FR IMPORTANT :Veuillez lire attentivement les instructions avant l’assemblage du produit
I IMPORTANTE: leggere il presente manuale prima di iniziare a montare il prodotto.
DE WICHTIG: Bitte lesen Sie dieses Handbuch, bevor Sie mit der Montage dieses Produkts beginnen
ES IMPORTANTE: Lea este manual antes de comenzar a ensamblar el producto.
RU ВНИМАНИЕ: Пожалуйста, прочтите данное руководство перед сборкой изделия.

Tunturi Pure Strength www.tunturi-fitness
.com
1
Table of Contents / Inhoudsopgave / Tables des Matieres /
Sommario / Inhalt / Índice / Содержание
1. English P 2
2. Nederlands P 11
3. Français P 20
4. Italiano P 29
5. Deutsch P 38
6. Español P 47
7. Русский язык P 56

Tunturi Pure Strength www.tunturi-fitness
.com
2
IMPORTANT SAFETY PRECAUTIONS
This bench is built for optimum safety. However, certain precautions apply whenever
you operate a piece of exercise equipment. Be sure to read the entire manual before
you assemble or use your bench. In particular, note the following safety precautions:
1. Keep children and pets away from the bench at all times. Do not leave children
unattended in the same room with the bench. The bench is not a toy and therefore
parents and guardians should be aware of the natural tendency for children to
play, leading to situations and behaviour for which the bench is not intended.
2. If children are allowed to use the bench their physical/mental development and
above all, temperament should be taken into account. Constant supervision is
therefore needed.
3. Only one person at a time should use the bench.
4. If the user experiences dizziness, nausea, chest pain or any other abnormal
symptoms, STOP the workout at once. Consult a physician immediately. Injuries
may occur due to incorrect or excessive exercise.
5. Position the bench on a clear levelled surface which is clear of all obstacles as not
to restrict movement whilst exercising. DO NOT use the bench near water or
outdoors.
6. Keep hands away from all moving parts
7. Always wear appropriate clothing when exercising. DO NOT wear robes or other
clothing that could become caught in the bench. Running or aerobic shoes are also
required when using the bench.
8. Use the bench only for its intended use as described in this manual. DO NOT use
attachments not recommended by the manufacturer.
9. Do not place any sharp objects around the bench
10. Disabled persons should not use the machine without a qualified person or
physician in attendance.
11. Before using the bench to exercise, always do stretching exercises to properly
warm up.
12. Never use the bench if it is not functioning properly.
13. This product is intended for H=Domestic use only.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT
YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS
OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH
PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS
EQUIPMENT. TUNTURI NEW FITNESS B.V. ASSUMES NO RESPONSIBILITY
FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR
THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.

Tunturi Pure Strength www.tunturi-fitness
.com
3
IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Bench: Two Adjustable Wrenches and
Allen Wrenches.
NOTE: It is strongly recommended that this machine is assembled by two
or more people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on
components that need to be assembled. Attach washer only to end of the
Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on
components that need to be assembled.
Always wait until all bolts are assembled onto the bench before tightening the
bolts. Do not fasten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivotal function.
Make sure all pivotal components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.

Tunturi Pure Strength www.tunturi-fitness
.com
4
WARNING LABEL PLACEMENT
Warning label affix here.

Tunturi Pure Strength www.tunturi-fitness
.com
5
BACKREST ADJUSTMENT ANGLES
Backrest adjustment angle ranges from -23
0
to 68
0
.
CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The machine can be cleaned using a damp cloth and mild non-abrasive
detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out
of use until repair.
6. Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum weight capacity (including user weight): 270kg.
2. Maximum weight on Crutch: 135kg
3. Maximum weight on Leg Developer: 45kg
4. Assembled Dimension: 1870mm x 1160mm x 1500mm

Tunturi Pure Strength www.tunturi-fitness
.com
6
Lock Leg Developer
Pull out the U-shaped Lock Pin (#25) and drop the pin into the open slot on Leg
Developer while not in use.
Install Arm Curl Stand
Lock Leg Developer. Loosen the Lock Knob (#32). Pull out the Leg Developer and
store to the stand on Base. Insert the Arm Curl Stand (#11) into the opening on Leg
Developer Holder (#1).
Fold Up the Bench
1. Place the Backrest Adjustment Bar (#8) onto the lowest slot on Uprights.
2. Lock the Leg Developer.
3. Pull out the Folding Lock Pin (#24) and raise the Main Seat Support to vertical
position.
4. Insert the Folding Lock Pin back into the open hole on Cross Brace (#3).

Tunturi Pure Strength www.tunturi-fitness
.com
7
PARTS LIST
KEY
NO. DESCRIPTION SIZE QUANTITY
1 Leg Developer Holder 1
2 Upright Base 2
3 Left Upright 1
4 Right Upright 1
5 Crutch 2
6 Cross Brace 1
7 Main Seat Support 1
8 Backrest Adjustment Bar 1
9 Seat Bracket 1
10 Backrest Support 2
11 Arm Curl Stand 1
12 Sea Incline Support 1
13 Front Post 1
14 Leg Developer 1
15 Seat Pad 1
16 Backrest Board 1
17 Arm Curl Pad 1
18 Foam Roll 6
19 Foam Tube 3
20 Upright Bracket 2
21 L-shaped Lock Pin ؾ” 140mm 1
22 Sleeve 50mm x 60mm 2
23 Leg Developer Axle M10x50mm xØ16mm 1
24 Folding Lock Pin 1
25 U-shaped Lock Pin 1
26 Spring Ø12mm x 55mm 1
27 Bushing Ø 25mm x 8mm 2
28 Bushing Ø 18mm x 9mm 2
29 Cross Brace Bracket 2
30 Olympic Clip Ø49mm 1
31 Standard Clip Ø 24.5mm 1
32 Lock Knob M18 3
33 Crutch Sleeve 65mm x 32mm 2
34 End Cap 45mm x 45mm 4
35 End Cap 50mm x 50mm 1
36 End Cap 40mm x 60mm 1
37 Sleeve 60mm x 50mm 1
38 Foam Roll End Cap 6

Tunturi Pure Strength www.tunturi-fitness
.com
8
39 Bushing Ø50mm x Ø16mm 2
40 End Cap 25mm x 25mm 6
41 Rubber Bumper Ø30mm x 30mm 1
42 Front Post End Cap 1
43 Base End Cap 4
44 Olympic Sleeve 1
45 End Cap Ø25mm 1
46 Bolt Cover Cap M10 20
47 Bolt Cover Cap M12 2
48 Allen Bolt M8 x 16mm 2
49 Allen Bolt M8 x 40mm 8
50 Allen Bolt M10 x 20mm 3
51 Hex Bolt M10 x 85mm 2
52 Hex Bolt M10 x 155mm 2
53 Hex Bolt M12 x 100mm 1
54 Carriage Bolt M10 x 75mm 8
55 Carriage Bolt M10 x 110mm 4
56 Self Tapping Phillips Screw ST2.9 x 9.5mm 4
57 Phillips Screw M6 x 16mm 1
58 Washer Ø28mm x Ø13mm 2
59 Washer Ø 20mm x Ø10.5mm 23
60 Washer Ø16mm x Ø8.4mm 10
61 Washer Ø 6mm 1
62 Washer Ø 25mm x 11mm 1
63 Aircraft Nut M10 16
64 Aircraft Nut M12 1
65 Sleeve Ø 28mm x 200mm 1
66 Sleeve Ø 30mm x 200mm 1
67 Lock Pin Cover 1

Tunturi Pure Strength www.tunturi-fitness
.com
9
EXPLODED DIAGRAM