DISCONNECT No battery is connected to the charger’s balance port.
CONNECT_ERRO
CONNECT_REVERSE
BATT_FAULT
BALANCE_FAULT
CHECK_IR_FAULT
CELLSNUM_ERRO
INPUT_VOLT_LO
INPUT_VOLT_HI
OUTPUT_VOLT_HI
BATT_VOLT_LOW
BATT_VOLT_HIGH
OVERTIME
TEMPCUTOFF
CAPCUTOFF
INTERTEMPCUTOFF
The input voltage is below the limit set in the USER SET menu.
The capacity (mAh) charged or discharged reached the configured protection limit.
Error messages
Cells count or voltage is incorrect.
The output is connected to a battery with incorrect polarity.
The battery detected by the charger is damaged.
The connection between battery and the charger balance port is incorrect.
The IR checking is failed.
The cell count is incorrect.
The input voltage is over the limit.
The output voltage is over the limit.
The output voltage is below the limit.
The battery voltage is over.
The time is over the limit set in the USER SET.
The external temperature sensor detects (battery) temperature above the limit.
The internal temperature is over.
10