Tview T919IR User manual

T919IR T919IR
OWNER'S MANUAL
9.5” TFT LCD MONITOR SB -95 00
9.5” TFT LCD MONITOR T9 19 IR
AV1/AV2
MOD E
MEN U
OPEN

12
you have chosen a product which
combines deliberate technical features
with an appealing design.
Dear Customer,
we like to congratulate you on the
purchase of your new mobile TFT
monitor!
Please read this manual conscientiously
and carry out the given instructions
before and while you are using your new
device.
Preface
Capability Characteristics
Remote control.
Ceiling bracket.
Screen with 45 swivel.
Automatic PAL/NTSC toggle Technical Specifications:
Weight: 1.16kg
Size(H*B*T): 22*25*2.5cm
Operation: DC 12V
Screen Size: 9.5"(16:9/4:3 Format)
Resolution (Pixel): 640x480xR.G.B
Color Encoding: PAL/NTSC
Power Consumption: 9W
Video Input Channels:2
Operation Remote Control: Button cell(Cr2025)
O
Security Advices
Before using the device,please check it for any possible damages. In case of damage do not operate it.
Unplug the device if you do not use it for a certain time.
The device may not become subject of mechanical stress and should not be exposed to humidity.
To be considerate of the ventilation do not cover the device and protect it from direct solar radiation.
Clean the device with a dry and soft cloth only.
Caution!Should the device itself get damaged,please let the repair to the manufacturer or to a qualified
service agent.
Please dispose packaging materials properly and do not let play children with it.
The device itself is no toy either. Do not let children play with it too
+12V DC
Ground
Fuse box
A e l w 1
RC Y l o AV
A
Yllow
RC eAv2
CAUTION:
please observe the right polarity of the cables an the right colours of the RCA-plugs
1. POWER: Turn on/off power
2. AV1/AV2:Input signal to switch
3. MODE: Aspect ratio 16:9 and 4:3
to switch
4. Remote Control Signal Receiver
5. -:Reduction/menu adjust button
6. MENU: Menu adjustment
7. +: Increase/ menu adjust button
8. Light
9. Open: Opener
10. Light Switch
11. IR transmit window
Control Elements and Connections
9.5” TFT LCD MONITOR SB- 9500
9.5” TFT LCD MONITOR T91 9I R
AV1/AV2
MODE
MENU
OPE N
CA
R WhtL I
i e N
A e I
RC R d R N
9.5” TFT LCD MONITOR SB-9 50 0
9.5” TFT LCD MONITOR T91 9IR
AV1/AV2
MODE
MENU
OPE N
1 2 3 4567
8
9
10
1111

3
1.Pow er: Turn on /off power
2. : Press them to increa se an d de cr ea se the bri ghtne ss.
3. COL: Pres s them to increase an d de cr ease the co lor.
4. : Press them inc rease an d de crease co nt rast.
5. : Press it to se lect the mode
(st an da rd, ligh t, so ft, vi vi d mem ory)
6.Rev erse: Turn the pi ct ure from left to righ t or up to do wn.
7.V1/ V2: AV1/ AV2 to switch
to
,
POWER
COL
1
2
3
4
SYS
V1\V2
5
6
7
Remote Control
The above functions can be executed by MENU on the display
or remote control unit.
Press the MENU of unit , you can choose BRIGHT
COLOR” “CONT TINT(ONLY NTSC SYSTEM)
LANGUAGE SCALING , then press “+” “-” on the unit to
adjust that you need. Or press / col / “ ” “ ” on the
remote control directly adjust BRIGHT COLOR
CONT
“ ”
“ ” “ ”
“ ” “ ”
“ ” “ ”
“ ”
.
.
.
.
Precautions before using remote control unit
AV Display Mode:
Remote control unit operating range
6
1.
Replacing the battery
2.
3.
Operating method: Press the button “V1/V2” on the remote control
or “AV1/AV2” on the unit to choose AV display mode. If the VCD or
DVD signal is connected, there should be display normally pictures
signal ;If the VCD or DVD signal isn't connected, The screen is blue.
the system will display “NO SIGNAL”.
1. BRIGHT
2. COLOR
3. CONT
4. TINT(only NTSC system)
5. LANGUAGE
6.SCALING(16:9/4:3)
4
IR: The machine equipped with IR audio transmitter, frequency (2.3MHZ,
2.8MHZ), please choose a suitable infrared receiver headset answer-
ing, receiving distance in a straight line within 3 meters
IR emission from AV1/AV2 audio control, as long as the boot, with the
audio input can be launched

ALARM
For your safety, driver are advised not to watch the display when driving.
It's prohibited in law of some countries when driving and operating to
watch displayer.
SIMPLE TROUBLE-SHOOTING GUIDE
Symptom Probable Cause Solution
Black Screen
1.No12 voltage
2.Brightness or contrast
ratio is too small
3.no high-voltage
1 .check the power is on or
connect rightly
2. check the A/V Cable
is loose or not
3. Increase the brightness
and contrast ratio
NO picture
1.No sources output
2.The video concentric plug
becomes loose
1.Check the output of VCD
or DVD
2.Replace with the A/Vcable
3.Tighten the Video input
cable
color picture
1 Video sources have
no output
2.Color ratio should be
re-adjust
1.check the video sources
2.Enter into the Menu to
re-adjust
With a little regular light
spots and color spots on
the screen or black
horizontal line in the
picture
It is normal symptom in the
active matrix display
technology.
it is normal symptom in
view range with a little
regular light spots on
display screen.
Unclear picture
1.Poor quality of the
video sources
2.Bright &Contrast
1.Replace with the high
quality videodisc
2.Reset Bright &contrast.
The outer cover of the
monitor has been deformed
1.External temperature is
too high.
2.The power has not been
switched off for a long time.
1.The surround temperature
should not exceed to 0-60
degrees.
2.Turn off the power after
using the unit.
Please check the following faults before sending your units for repairs.
56