UBCO 2X2 User manual

PRERIDE
CHECKLIST
2
5
1
4
6
3
1. Check your power supply is
suciently charged.
2. Ensure the battery strap and
plug are secured tightly.
3. Ensure the lights are working:
headlight and rear lights.
4. Test the brakes & the horn
are functioning properly.
5. Check the tyre pressure;
inflate if needed.
6. Do a physical check to
ensure all nuts, bolts, and
fixings are tight and all loads
are secure.
7. Always wear a helmet and
appropriate clothing and
footwear.
Before you head out on your 2X2, always
check that your bike is ready to ride.
ubcobikes.com
[e-mail]
@ubcobikes #ubco2x2 UBCO 2X2 WORK BIKE

GET READY
AKeep the bike standing in the base to help align the handlebars. Remove the
protective packaging from the bike.
AFind the Field Kit under your seat and set out the tools you’ll need.
ANote: Remember to remove the guidance stickers after each step is completed.
2. Fit the right-hand kickstand
ARemove the kickstand from the
packaging and remove the two
mounting bolts.
AFit the kickstand on the outer side of
the kickstand mount and insert bolts
with the washer on the bolt head side.
ATightly fasten the bolts using a 5mm
Allen key and 13mm spanner. (Tighten
to 22Nm if you have a torque wrench).
3a. Install the power supply
AIMPORTANT: inspect the power supply; contact UBCO if there is any transit damage.
AIf the power supply is not already in place, remove the battery strap from the frame and set
aside. With the power socket on the right-hand side of the bike, carefully lower the power
supply into place with both hands.
APlug the bike’s power plug into the power socket. Use the securing key to lock the power
supply in place.
ASecure the battery strap as shown (3b).
1. Align the handlebars
ALoosen the side bolts on the stem
with a 5mm Allen key. Straighten
the handlebars in line with the front
wheel and so the orange dots align.
AOnce the handlebars are
straight, re-tighten the stem bolts,
alternating as you go to prevent
damage to the clamp. Align the
marking on the bolt head to
achieve the correct tightness.
Torque to 15Nm, if available.
V3.3
Power Plug
Lock
Power Supply
Power
Socket
Left
bar
Power Supply
Right
bar
13
4
2
3b. Secure the battery strap
AVelcro side down, tuck the end of the battery strap under the left hand bar,
central to the power supply.
ACarry the strap over the power supply and tuck it under the right hand bar. Feed
the strap back through the clip and centre the clip.
ATighten the strap and secure it closed.
READY TO RIDE
STEP 1:
Download the UBCO App
You can download the UBCO
App to view speed and battery
charge, control the settings
of your 2X2, and get critical
updates delivered wirelessly.
Simply search for UBCO in
your phone’s app store and
download it for free. Make sure
Bluetooth is activated on your
mobile device when connecting
the app to your 2X2.
STEP 2:
Turn on the 2X2
Grab your keys and power
the bike by pressing the
button on the key fob
1.5 seconds until you
hear a beep. You can
now open the app and
connect your bike.
See the complete
riding instructions in
the User Manual on
page 16.
STEP 3:
Check power supply charge
View the charge level on the Home
and Live Dash screens of the app.
Your power supply will arrive with
partial charge, enough to ride for a
few minutes. Be sure to fully charge up
before you plan a longer ride.
STEP 4:
Before you ride
Ensure you’ve read the user manual
and are familiar with how to use the
bike and proper safety precautions.
Always wear a helmet. Once you’re
ready to ride, twist the throttle and GO!!!
Find UBCO online:
ubcobikes.com
.com/ubcobikes
instagram.com/ubcobikes
youtube.com/ubcobikes
Join the UBCO Owners group for tips
and tricks from our community.
facebook.com/groups/ubcoowners
Key fob
Securing key
KIA ORA
HELLO.
If your 2X2 has arrived in the box,
here’s how to set up your new ride.
Lift up the seat to find a Field Kit with all the tools
you need for assembly and some basic maintenance.
Scissors or a knife will also be handy and a torque
wrench, if you have one.
Scan this QR code to watch
our bike assembly video.
If you don’t feel confident
putting your bike together,
contact us for help.