Ubiquiti UniFi USW-Pro-24-POE User manual

UniFi Switch Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Rubber Feet (Qty. 4)
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.10.x (or newer), available at: ui.com/download/unifi
IMPORTANT: We strongly recommend using UPS backup and power regulation
to prevent equipment damage due to stability issues with local AC power.
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Touchscreen Display
RJ45 PoE LED (Ports 1 - 24)
RJ45 Speed/Link/Activity LED (Ports 1 - 24)
Bootup Animation Initializing.
Steady White Factory defaults, waiting for adoption.
Steady Blue Successfully adopted by a network and working
properly.
Location Animation
This indicates that you clicked Locate in the UniFi
Controller software. The software will also display the
location of the device on the map.
Off No PoE
Amber 802.3af/at/bt PoE
Off No Link
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

SFP+ Speed/Link/Activity LED (Ports 25 - 26)
RJ45 (Ports 1 - 16)
RJ45 (Ports 17 - 24)
SFP+ (Ports 25 - 26)
Reset Button
Amber
Link Established at 10/100 Mbps
Flashing Indicates Activity
Green
Link Established at 1000 Mbps
Flashing Indicates Activity
Off No Link
Green
Link Established at 1 Gbps
Flashing Indicates Activity
White
Link Established at 10 Gbps
Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at PoE output.
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at/bt PoE output.
Hot-swappable SFP+ ports support 1/10 Gbps connections.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

USP LED
USP Connect DC Input
Power Port
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
The LED lights up blue when there is an active power connection on the USP DC
input.
This DC input provides redundant power when the UniFi Switch is connected to the
UniFi SmartPower Redundant Power System, model USP-RPS, via the USP Cable
(not included). If there is an AC power loss or internal power supply failure, the UniFi
Switch will draw power from the USP-RPS instead.
Connect the included Power Cord to the Power port.
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor
use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded through the AC ground of the
power supply.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself
should be housed inside a protective enclosure.
Hardware Installation
1.
2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

OR
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Connecting Power
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD