Ubiquiti US-24 User manual

Power Cord Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Rubber Feet (Qty. 4)
Package Contents
US-24
OR
US-48
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself should be
housed inside a protective enclosure.
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

System LED
RJ45 Link/Speed/Activity LED
SFP+ Link/Speed/Activity LED (US-48 only)
SFP Link/Speed/Activity LED
RJ45 Ports
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v4.8.5 or newer (available at: ui.com/download/uni )
Hardware Overview
Click here for detailed descriptions.
Off No Link
Amber Link Established at 10/100 Mbps
Flashing Indicates Activity
Green Link Established at 1000 Mbps (1 Gbps)
Flashing Indicates Activity
Off No Link
Green Link Established at 1 Gbps
Flashing Indicates Activity
White Link Established at 10 Gbps
Flashing Indicates Activity
Off No Link
Green Link Established at 1 Gbps
Flashing Indicates Activity
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

SFP+Ports (US-48 only)
SFP Ports
Reset Button
Console Port
DC Input
Power Port
RJ45 ports support 10/100/1000 Ethernet connections.
Hot-swappable SFP+ ports support 10 Gbps connections.
Hot-swappable SFP ports support 1 Gbps connections.
This button serves two functions for the UniFi Switch:
Press and release the Reset button to restart the device.
Press and hold the Reset button (for at least ve seconds) to restore the device to its
factory default settings.
Back Panel Ports
RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-
DB9, serial console cable, also known as a rollover cable, to connect the Console port to
your computer. Then congure the following settings as needed:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
The 25VDC input can connect a redundant or stand-alone DC power source (not included)
with minimum power: 25W (US-24) or 56W (US-48), 25 to 16V, and 2.5 mm DC power inline
connector.
Note: You can use the redundant DC power source as a hot spare; if the internal
AC/DC power supply no longer provides power, then the UniFi Switch will
switch to the DC power source without interrupting its operation .
Connect the included Power Cord to the Power port.
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

Hardware Installation
Mounting in a Rack (Optional)
1.
2. 
OR
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

Connecting Power
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

1.
2.
Connecting Ethernet
1.
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

2.
Using SFP Ports
1.
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

2.
3.
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

For information about compatible ber SFP modules, visit: community.ubnt.com/uni
Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/uni and follow the on-screen instructions.
Note: If you already have UniFi Controller v5.4.x or higher installed, go to the section,
Adopting the UniFi Switch.
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the username and password
that you created and click Sign In.
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents

You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to the section, Adopting the UniFi Switch.
For information on conguring and using the UniFi Controller software, refer to the User
Guide on the website: ui.com/download/uni
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
2. Locate the UniFi Switch in the list of devices under the Model column. Click Adopt.
3. The System LED on the UniFi Switch will turn blue to conrm that it has been successfully
adopted.
US-24, US-48 Quick Start Guide
×
Click for
Table of Contents