Ublox EVK-U2X User manual

Download the EVK-U2X software (and documentation)
from www.u-blox.com/evk-downloads and install the
software. See installation notes on back of card.
1. Insert SIM card in SIM card holder.
2. Connect the cellular antenna with SMA connectors
to the antenna connector (SMA female).
3. Connect the GNSS antenna to the GNSS antenna
SMA connector, if GNSS functionality is required.
4. Connect power adapter to 9 – 18 V power input
connector (J400) (+12 V). LED DL401 is blue.
5. To supply power to the board, turn main power
(SW400) switch to ON position. LED DL400 is green.
The module switches on.
Connection for communication via UART:
6. Connect USB cable to mini USB connector OR
Connect RS232 cable to cellular RS232 connector
Connection for communication via USB:
7. Connect USB cable to mini USB connector on the
adapter board (cellular native USB).
Quick Start EVK-U2x
2. Setup
Copyright © 2014, u-blox AG
1. Overview
1
2
5
4
7
UBX-14002546 - R03
3
6

Two COM ports are enabled with
Windows (the numbering of the ports
can be seen via the Windows De-
vice Manager). The serial port for AT
commands is available over the first
numbered COM port opened by the
driver.
Refer to the EVK-U26/U27 user guide
or the EVK-U20/U23 user guide for a
comprehensive description of the eval-
uation kit features and functionalities.
For more information regarding the
EVK-U2x, contact your nearest u-blox
support:
www.u-blox.com/en/
contact-us-support.html
4. Interfaces
5. More information
UBX-14002546 - R03
An Internet connection is required.
Supported Windows operating systems:
x86 and x64 versions of Vista, 7, and 8.
Download the latest EVK-U2x drivers
and documents from the u-blox
website:
• Enter this link into your browser:
www.u-blox.com/evk-downloads
• Choose the EVK-U2X kit.
• Choose a package: “Software only”
or “Software and documentation”.
• Unzip the downloaded file.
• Go to the Tools folder.
• Run the executable.
3. Installation