Using the Handbrakes
1. To operate the brake pull upwards on the handbrake lever to position (1)
2. When using the walker to move forward, the handbrake lever will remain
in position (2)
3. To lock the handbrake, push down on the handbrake lever until it ‘clicks’
into the lock position (position 2) to position (3)
4. To unlock the handbrake, pull up on the handbrake lever (from position 3)
to position (2)
2
1
3
How to fold your walker
1. Remove the basket and tray
2. Loosen clamps and remove arm extensions
from the arm pads (if required)
3. Loosen clamps and remove frame extension
tubes from the frame (if required)
4. Press on the safety catch to allow frame to
fold
5. Pull up on the centre bar until frame folds
Brake tension adjustment
1. To adjust cable at the handbrake handle -
1. Loosen lock nut. 2. Turn cable adjuster
clockwise to loosen the brake. 3. Turn cable
adjuster anti-clockwise to tighten the brake
2. If further adjustment is required please contact
your Unicare Health product distributor
Cleaning and Maintenance
Keep hair and lint from around wheel axles and
bearings and oil moving parts occasionally. Ensure
brakes are at optimum adjustment and handle
adjustment knobs are tight. If walker frame is bent
or shows sign of fatigue DO NOT USE WALKER.
Handle / Height Adjustment
1. Loosen clamps at adjustment point
2. Move to the required position
3. Tighten clamp until secure
Centre
Bar Basket
Frame
Extension
Tubes
Remove
Basket
Clamps
Safety
Catch
Centre
Bar
How to Unfold your walker
for use
1. Push down on centre bar until frame opens.
Ensure safety catch is fi rmly in place
2. Fit frame extension tubes to top of frame.
Ensure both are at the same height before
tightening clamps (if not already fi tted)
3. Fit arm extensions into the arm pads. Ensure
both are the same length before tightening
clamps (if not already fi tted)
4. Fit basket to front hooks
5. Adjust all heights, lengths and angles to the
correct fi tting for the client before using the
walker
2