Uniden XDECT 8105 User manual

1
XDECT 8105
Accessory Handset
For more exciting new products please visit our website:
Australia: www.uniden.com.au
New Zealand: www.uniden.co.nz

2
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
• This unit is NOT waterproof. DO NOT expose this unit to moisture.
• DO NOT expose this unit to rain.
• Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
• Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS!
IMPORTANT SAFETY INSTRUCTIONS
• The grant of a NZ Telepermit for any item of terminal equipment
indicates only that Telecom has accepted that the item complies with
minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it provide any sort
of warranty. Above all, it provides no assurance that any item will work
correctlyin all respects with another item of Telepermitted equipment
of a differentmake or model, nor does it imply that any product is
compatiblewith all of Telecom’s network services.
• The maximum volume setting of this telephone exceeds the Telecom
specified volume requirement. Telecom takes no responsibility for the
high volume available on this telephone, who believe this telephone is
too loud should contact the manufacturer at the website indicated on
owner’s manual warranty page.
• For telephone networks other than Telecom there may be a charge
incurred for local calls if the Insert 0 feature is on. Turn Insert 0 off.
• This equipment may not provide for the effective hand-over of a call to
another device connected to the same line.
General Notices for New Zealand Model:

3
If any item is missing or damaged, contact your place of purchase
immediately. Never use damaged products!
Need help? Get answers at our website:
• www.uniden.com.au for Australian model
• www.uniden.co.nz for New Zealand model.
What’s in the Box?
XDECT 8105 accessory
handset with charger
Rechargeable Battery
Pack
AC adaptor
XDECT 8105
Battery Cover

4
This handset is designed for use with Uniden’s XDECT 8115 and XDECT
8155 bases.
Compatible Bases
REGISTERING TO A BASE
INSTALLING YOUR HANDSET
The accessory handset won’t work until you register it to a
compatible Uniden cordless phone!
1. Unpack the handset, battery pack, and battery
cover. If you need to remove the cover, press in
on the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside
the handset; the connector only fits one way.
3. Push the connector in until it clicks into place; tug
gently on the wires to make sure the battery is
securely connected.
4. Replace the battery cover and slide it into place.
5. Use the AC adaptor to connect the power jack on the charger to a
regular indoor (240V AC) power outlet.
6. Place the handset in the charger with the display facing forward. If the
display doesn’t light up, reseat the handset or connect the charger to
a different outlet.
Charge the Battery
#Charge the handset completely (about 15 hours) before using it.
Installing the Beltclip
Line up the holes on each side of the handset.
To attach the belt clip; Insert into the holes on each side of the handset.
Press down until it clicks.
To remove the belt clip; Pull either side of the belt clip to release the
tabs from the holes.
Your handset may be used with the Uniden HS915 headset. To use this
feature, insert the headset plug into the headset jack. Your handset is
ready for hands-free conversations. Headsets can be purchased online,
see the website details on the front cover.
Headset Installation

5
If.. Try..
xyou don’t hear a dial tone
xthe display says Registration
Failed
Making sure the handset is fully
charged, before trying again.
Test the Connection
Registration Methods
This handset is designed for use with XDECT 8115 and XDECT 8155
bases. For the most up-to-date list of compatible bases with this handset,
see our website.
Does the handset fit in the base cradle?
Yes Place the handset in the base. The display should say
Registering.
No Does the base have an LCD display?
Yes On the base, open the menu and select
Register Accy. The display should show
Registering.
On the handset, press and hold #DND until the
display shows Registering (about 2 seconds).
No On the base, press and hold FIND HS when the
phone is in standby (about 5 seconds).
On the handset, press and hold #DND until the
handset display shows Registering (about 2
seconds).
#After about 30 seconds, the handset display should say Registration
Complete.
Pick up the handset and press TALK/FLASH. Make sure you get a dial
tone. (Press END to hang up.)
RESETTING THE HANDSET
If you are having trouble with a handset or if you want to replace one, you
need to clear the registration information from the base and the handset:

6
Parts Number Input Voltage Output Voltage
AAD-600S(M) 100-240V AC, 50/60Hz 9V DC @ 210mA
Type Capacity Talk time Standby Time
BT-694 or
BT-694s
BT- 694n
650mAh or 500mAh
or 400mAh
about 10 hours about 7 days
IMPORTANT INFORMATION
AC Adaptor
Battery Information
1. All features and operation for the handset are described in the owner’s
manual for the base.
2. Owner’s Manual for all Uniden phones are available on our website for
free downloading.
• Use only the supplied AC adaptors.
• Use the proper adaptor for the base and any chargers.
• Do not place the unit in direct sunlight or subject it to high
temperatures.
• Replace the battery when the talk or standby time becomes
noticeably reduced. For replacements, visit the online shop on our
website (see the front cover).
• When the battery gets low, the handset beeps and shows a low
battery alert; put the handset in the cradle for recharging.
Do you have the base the HS is registered to?
Yes No
1. Press & hold END and #until
the System Reset menu appears
(about 5 seconds).
2. Select Deregister HS. The display
lists all registered handsets.
3. Select the HS you want to reset.
4. 4. When the phone asks you to
confirm, select Yes. The HS clears
its information from the base &
deletes it own link to the base.
1. Press & hold END and #until
the System Reset menu appears
(about 5 seconds).
2. Select Base Unavailable.
3. When the phone asks you to
confirm, select Yes. The handset
deletes its own link without
contacting the base.

7
ONE-YEAR LIMITED WARRANTY
Terms of Warranty: Uniden Aust/NZ warrants to the original retail
purchaser only that the XDECT 8105 (“the Product”), will be free
from defects in materials and craftsmanship for the duration of the
warranty period, subject to the limitations and exclusions set out below.
Warranty Period: This warranty to the original retail purchaser is only
valid in the original country of purchase for a Product first purchased
either in Australia or New Zealand and will expire one (1) year from the
date of the original retail sale. If a warranty claim is made, this warranty
will not apply if the Product is found by Uniden to be:
A. Damaged or not maintained in a reasonable manner or as recommended
in the relevant Uniden Owner’s Manual;
B. Modified, altered or used as part of any conversion kits, subassemblies
or any configurations not sold by Uniden Aust or Uniden NZ;
C. Improperly installed contrary to instructions contained in the relevant
Owner’s Manual
D. Repaired by someone other than an authorized Uniden Repair Agent in
relation to a defect or malfunction covered by this warranty; or
E. Used in conjunction with any equipment, parts or a system
notmanufactured by Uniden.
Parts Covered: This warranty covers the Product and included
accessories.
User-generated Data: This warranty does not cover any claimed loss of
or damage to user-generated data (including but without limitation phone
numbers, addresses and images)that may be stored on your Product.
Satisfactory evidence of the original purchase is required for warranty
service. Please refer to our Uniden website for any details or warranty
durations offered in addition to those contained below.
The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498
(“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the
case maybe.
XDECT 8105
Important:
Warrantor:

Statement of Remedy: If the Product is found not to conform to this
warranty as stated above, the Warrantor, at its discretion, will either
repair the defect or replace the Product without any charge for parts or
service. This warranty does not include any reimbursement or payment
of any consequential damages claimed to arise from a Product’s failure to
comply with the warranty. Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. This warranty is in addition
to and sits alongside your rights under either the COMPETITION AND
CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES
ACT (New Zealand) as the case may be, none of which can be excluded.
Procedure for Obtaining Warranty Service: Depending on the
country in which the Product was first purchased, if you believe that
your Product does not conform with this warranty, you should deliver
the Product, together with satisfactory evidence of your original
purchase (such as a legible copy of the sales docket) to Uniden at the
addresses shown below. You should contact Uniden regarding any
compensation that may be payable for your expenses incurred in making
a warranty claim. Prior to delivery, we recommend that you make a
backup copy of any phone numbers, images or other data stored on
your Product, in case it is lost or damaged during warranty service.
UNIDEN AUSTRALIA PTY LTD
Service Division
345 Princes Highway,
Rockdale, NSW 2216
Phone number: 1300 366 895
Email: [email protected]
UNIDEN NEW ZEALAND LTD
Service Division
150 Harris Road, East Tamaki
Auckland 2013
Phone number: [phone]
Email: [email protected]
©2012 Uniden Australia Pty Ltd/Uniden New Zealand Lt
d
Printed in Vietnam U01UU282BZZ(0)
U01UU297BZZ(0)
2013