Unimax HS1301 User manual

???
??????
WARRANTY CARD
Product: SET OF UNIVERSAL PULLERS WITH REVERSE HAMMER
Type: HS1301
Date of manufacture:
Date of sale, stamp, signature:
Serial number (product series):
Repair centre notes:
Without the correctly filled warranty card or without proof of purchase receipt, including
the product type (invoice, purchase receipt) no warranty claim will be processed.
1. KH Trading machines and tools are covered by 6/24 months warranty, starting on the date of
purchase, as described in the Civil Code (proof of purchase or invoice receipt must be
enclosed with the warranty card when making a claim).
2. This warranty does not cover defects caused by unprofessional handling, machine overloads, not
complying with instructions contained in this manual, using accessories that are not approved,
unauthorized repair, regular wear and tear and damages occurred during transport. Further, this
warranty does not cover parts and accessories such as the motor, carbon brushes, seals and
hot-air operated parts and parts that need to be changed regularly.
3. If the repair is to be found as not covered by the warranty policy, all costs including the repair and ship-
ping to and from the repair centre will be paid by the customer, according to valid price list. See www.
4. When making a claim, you must present the warranty card, showing the date of the purchase, the
serial number of the machine, vendor stamp and signature of sales clerk, as well as the proof of
purchase receipt.
5. Warranty claim shall be made at the vendor shop where you bought your machine or you may mail
it to a service centre. The vendor is obligated to fill out the warranty card (date of sale, serial
number, vendor stamp and signature). All these information must be filled in at the time of sale.
6. The warranty period will be extended for the period of time for which the machine has been in the
service centre possession. If the repair or defect is not covered by the warranty policy, all costs including
the repair and shipping will be paid by the owner of the machine / tool. We recommend sending the
machine in its original packaging. Please, also enclose brief description of the defect with the packaging.
7. Before sending the machine for repair, clean it thoroughly. If the received machine is dirty, it may
be rejected by the service shop or you may be charged a cleaning fee.
SERVICE
Logistic centre Klecany
Topolová 483
250 67 Klecany
Czech Republic
Claim department phone number: 266 190 156 T-mobile: [phone]
266 190 111 O2: 601 218 255
Fax: [phone] Vodafone: 608 227 255
http://www.KHnet.cz
Email: ser[email protected]
SSEETTOOFFUUNNIIVVEERRSSAALL
PPUULLLLEERRSSWWIITTHHRREEVVEERRSSEE
HHAAMMMMEERR
USER'S MANUAL
HS1301

2
Dear customer. Thank you for purchasing equipment from KH Trading, s.r.o.
Our company is ready to offer you our services - before, during and after you buy our product.
If you have any question, comment or idea, please contact our business centre. We will do our best to address
your comment or question in timely matter.
Before first use, please read this manual carefully. It is your responsibility to study all instructions,
necessary for safe use and operation and to understand all risks that may be involved during the use
of power machines.
WARNING! Do not try to use this machine before reading this entire manual and before you know
how to handle it. Keep this manual for future reference. Pay special attention to safety instructions.
Not complying with safety rules may cause injury to the operating person or to people standing by
or it may cause damage to the machine or to the work piece. Pay special attention to safety notes
and safety labels on the machine. Never remove or damage them.
Please, write information such as the invoice number
and the number of the sale receipt here in this box.
The set includes reverse hammer, shaped fastening clamps and many interchangeable extension pieces.
Specially shaped fastening clamps extend the use of direct fastening. Your pullers may be easily used for
vehicle brake drum pulling.
Pullers may be combined with many interchangeable extension pieces. Reverse hammer makes disassembly
easier and quicker.
DESCRIPTION
TECHNICAL SPECIFICATIONS
The accuracy of instructions, graphs and information contained herein, depends on the printing date. Due to
continuous product improvement, the manufacturer reserves the right to change technical parameters of the
product, without prior customer notification.
Diameter ratio of three-arm puller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 mm
Arm length to the bent part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 mm
Arm length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 mm
Diameter ratio of two-arm puller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 mm
Spindle diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 mm
Hole dimension - part 1
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .higher
A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 mm
B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 mm
C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 mm
D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 mm
Hole dimension - part 2 lower
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .lower
A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 mm
B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 mm
C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 mm
D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 mm
REPAIR AND MAINTENANCE REPORT
Report and maintenance report:
DATE SERVICE SHOP REPAIR AND MAINTENANCE REPORT

6
•Keep your equipment clean. Dirt may enter the inner machine mechanism and cause damages.
•Do not use aggressive cleaning solution or paint thinners to clean your tool/machine.
•Clean plastic parts with cloth dipped in soup water.
•Clean and lubricate metal surfaces with a cloth dipped in paraffin oil.
•If you are not using your device, lubricate it with suitable grease and store it in a dry place to prevent
corrosion.
Lubrication
Lubricate working surfaces with appropriate grease regularly.
When the operational life of your machine is over, dispose off it in accordance with valid rules and
regulations. Your product is made of metal and plastic parts that may be recycled when separated.
1. Disassemble all parts.
2. Separate all parts according to the material they are made of (e.g. metals, rubber, plastics, etc.).
Take the separated parts to the recycling facility near you for further processing.
Information about the locations of recycling centres may be found at your local City office or throughout an
Internet search.
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material. We are not liable for shipping damages due to incorrect packaging of your machine. If making
a claim at the shipping company the level and method of packaging plays a major role during claim evaluation
process.
Note: Pictures and contents in this manual may slightly differ from the actual product or accessories.
It is due to continuous improvement of our products. Such small differences have no effect on the product
functionality.
DISPOSAL
CAUTION
MAINTENANCE
3
???
•This tool may be used by a qualified person, 18 years or older who has been
trained in work and environmental safety procedures.
•Any person using this equipment must possess a medical certificate demon-
strating his eligibility to operate this equipment.
Symbols used in this manual
Warning!
This symbol informs you about the risk of personal injury or damage to the machine
or materials.
Warning!
Danger of damage.
Note:
Additional information.
Use personal protective gear.
General information
•Plastic bags and packaging materials pose danger to small children or animals.
•Make sure you know how to control your tool or machine and that you are familiar with its operating
procedure. Know the hazards that may occur, if not used correctly.
•Make sure that person operating this machine knows how to safely operate this equipment and that he
is familiar with hazards and risk that may occur during use.
•Maintain your working area clean. Disorganized and dirty working area may cause accidents.
•Never work in tight spaces or in purely lit rooms. Make sure that the floor is stable and that your work may
be done comfortably. Always keep stable posture.
•Observe your work continuously and use all your senses during work. Do not continue working if you
cannot pay attention.
•Maintain your equipment clean.
•Handles must be kept free of grease and dirt.
•Make sure no children, unauthorized persons or animals have access to your workshop.
•Do not put legs or hands inside the working space.
•Never leave your machine unattended during operation.
•Use only for purposes for which it has been designed.
•Use personal protective gear such as safety goggles, ear protection, respirator, safe working shoes etc.
•Do not underestimate your abilities and know your limits. Use both hands.
•Never work under the influence of alcohol or other drugs.
•Do not use the machine/tool if you feel dizzy or week.
•Any modifications or improvements to the machine are strictly prohibited. DO NOT USE if you discover
any cracks or damages to the machine.
•Never perform maintenance while the machine is in use.
SAFETY PRECAUTIONS

4
•If you see any unusual sign or hear any strange sound, switch off your machine and stop working
immediately.
•Do not forget to remove all wrenches and screwdrivers from your machine after use.
•Before use, make sure that all screws are tightened securely.
•Perform maintenance regularly. Before use make sure the machine is in good working conditions
and without any damage.
•Use only original spare parts for repairs.
•Using extension pieces or accessories not approved by the manufacturer may cause injuries to the
operating personnel.
•Use this tool only for work that it is capable of handling. Do not overload your machine or accessories.
Do not attempt to use machine with insufficient power to perform heavy duty work.
•Do not overload your device. Measure the work load in such way, so it could be done with comfortable
speed.
•The warranty does not cover damages caused by overloads.
•Do not expose to extremely high temperatures or direct sunlight.
•This machine is not design for use in humid environments or under water.
•If you are not using your machine, store it in a dry and safe place, out of reach of children.
•Before use make sure that all safety elements work correctly and efficiently. Make sure all moving parts
are in good working conditions.
•Before use make sure that no part is cracked or stuck.Make sure all parts are attached and assembled as
designed. Beware of all other conditions that may have a negative effect on the proper functioning of your
equipment.
•If not stated otherwise in this manual, all damaged parts must be repaired or changed.
Fine mechanics
•Never use a vise to hold your tool.
•Protect your machine from impact and fall. After you finish your work, place your tool back to the
protective case.
Assembly
•Do not use your machine unless completely assembled in accordance with the instructions contained in
this manual.
Auto-service Equipment
•Before you start working on a vehicle, make sure that the parking brake is applied and that the vehicle is
secured against movement.
Power equipment
•If your machine is equipped with depressed springs, use suitable device to release them slowly and safely.
•Before throwing the packaging material out, make sure no part is left inside. If so, take it out and install it.
Use the part listing for check-up and the installation drawing for guidance.
ASSEMBLY
5
Three-arm puller assembly
Using pulling cone
•Pulling cone/wedge is equipped with outer hexagonal piece and nut.
•When you screw and tighten the puller on the rod of the reverse hammer you may screw the treaded rod as
well as the extension pieces into the object that you intend to pull out.
Using the extension pullers - sample of use
Detailed description of the use of this device is not included in this manual, because the manufacturer /
distributor assumes that the user is experienced in similar type of work. Also according to the applicable
law, this device is considered as a commonly sold and used tool. If the user is unfamiliar with the use of
this device, we recommend finding out more information about using this device at the Department of
work safety.
OPERATION