Unitech PA692A User manual


© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Rugged Handheld Computer
- PA692A -
User's Manual
Version 1.1

Table of Contents


(QJOLVK 
'HXWVFK 
(VSDQRO 
)UDQFDLV 
7XUNFH 
㖍㛔婆 
󰵶㔯䷩橼 
󰵶㔯ㆰփ««««««««««««««««««««««««««




1
1. Package
English
Please make sure the following contents are in the PA692A gift box.
If something is missing or damaged, please contact your unitech
representative.
Deutsch
The standard package contents
 PA692A Terminal
 Battery
 Plugs + Power Adapter
 Hand Strap
 USB cable
 Regulatory Compliance Statements
Optional accessory:
 Vehicle Cradle (Car Kit)
 Single slot USB Cradle
 RS232 cable
 Single Slot Ethernet cradle.
 4 slot Multi-Bay Ethernet Cradle
 4 slot battery charger
 Gun grip
 Earphone
Espanol Francais ѝ᮷ㆰփύЎ(ᕷᡏ)

2
English Deutsch Espanol Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
8
1
3
2
5
4
1
2. Product Detail
PA692A Front and Rear View
13
1
7
8
9
10
11
12
13
6
LED indicators 8 Battery cover
2 LCD touch screen 9 Antenna
3 Keypads 10 Speaker
4 Receiver 11 5 megapixel / AF camera
5 Universal connector 12 LED flash light
6 Barcode scanner window 13 Battery cover tab
7 Earphone jack

PA692A Left and Right View
3
English Deutsch Espanol Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
4
1
5
3
2
1 Scanner trigger button 4 Camera mode
2 Volume up/down 5 MicroSD card slot
3 Vibration/Mute mode

3. Getting Started
Installing the Battery
English
A backup battery cell is embedded into your device to prevent data loss when
the main battery pack is removed or completely discharged. This backup
battery will keep the data and system setting for up to 2 hours if the main
battery is removed.
Deutsch
1. Open the battery cover by sliding
the tabs on both sides in the
direction of the arrows shown and
lift the cover up.
Battery Cover Tab
Espanol
2. Push up the backup battery and
switch to the “ON” position by
using any tip of a pen to turn on
the backup battery.
4
Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
3. Slide and position the battery
pack, making sure the battery
contacts are aligned with the
contacts in the compartment.
4. Use your thumb to snap the
battery in place.
5. Replace the battery cover by
pushing down on the tabs and
sliding them back into place as
shown.
Backup
Battery
Switch
Battery
Compartment
Contacts
Plastic Tab

5
English Deutsch Espanol Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
NOTE: Make sure the battery cover is securely closed, or you may be unable to
turn ON the terminal.
NOTE: To enable the backup battery cell to provide backup power supply, charge your device
with the main battery pack for at least 24 hours.
NOTE: To power on the device properly, make sure to replace the battery cover
after installing the battery.
WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO
NOT disassemble, crush, puncture, short external contacts, or dispose the
battery pack in fire or water. DO NOT attempt to open or service the battery pack.
Dispose of used batteries according to local recycling guidelines in your area.

Charging the Battery
Before using the terminal for the first time, you need to charge it for about 24
hours. After that, you can charge the terminal for 3 hours to recharge the
battery to full capacity. Charge the terminal using the USB charging cable or
the docking station.
English
1. Press and hold the release button on both sides of the USB charging
cable and connect it to the PA692A
2. Plug the AC adapter cable into the power jack of the USB charging cable
3. Plug the AC adapter cord into an electrical outlet.
Deutsch
WARNING! Turn ON the backup battery switch before charging the battery.
Data you entered may not be properly stored until the built-in backup battery has
been adequately charged.
Espanol Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
6

Turning on the terminal for the first time
After you have initially charged your device for about 24 hours, the device is
ready to be used. You can now start up your device. You can then set up the
languages, WiFi setting and date and time.
Power-On Button
Turn ON your device by pressing the power button on the front panel.
English Deutsch
Checking the LED status
Terminal LED indicators
Espanol
7
Francais
Status LED Description
Scan Green light blinks once Successful reading
Solid Red light Being charged
Terminal Power Solid Green light Fully charged
ѝ᮷ㆰփ
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon
appears on the device screen indicating low or very low battery status. In both
cases, connect PC with USB to back up your data, and then recharge your
device as soon as possible.
ύЎ(ᕷᡏ)

Using the MicroSD Memory Card
The PA692A has an expansion slot compatible with a range of MicroSD
memory cards, which are primarily used to back up or transfer files and data.
English
Inserting a Memory Card
1. Remove the two screws on the
MicroSD slot shield and remove
the shield.
Deutsch
2. Insert the MicroSD card with the
notched corner as shown.
Espanol
3. Push the card into the slot until you feel the MicroSD card click into place.
4. Screw the MicroSD compartment cover back into place.
Francais
Removing the Memory Card
1. Remove the two screws from the MicroSD compartment shield and
remove the shield.
2. Press the card in and release. The card pops out.
ѝ᮷ㆰփ
3. Remove the card from the slot.
ύЎ(ᕷᡏ)
8

Using the SIM Card
The PA692A has a slot for a GPRS SIM card inside the battery compartment.
Inserting the SIM card
1. Remove the battery cover and the
main battery.
English
2. Slide the cover of the SIM card
slot to the right to release the
latch.
Deutsch
3. Pull and open the cover with
thumb.
Espanol Francais
4. Insert the SIM card into the cover
with the notched corner up, and
the contact side of the SIM card
faces down.
SIM
card
insert
here
ѝ᮷ㆰփ
5. Close the cover over the slot, and
then slide the cover to the left to
lock the SIM card.
6. Put the battery back into the
battery cover and replace the
battery cover.
ύЎ(ᕷᡏ)
9

4. Keypads and Function Buttons
Numeric Keypad Qwerty Keypad
For Numeric Keypad
10
English Deutsch
Description Key Description Key DescriptionKey
Espanol
Power key Back key Up cursor key
Enter key Backspace key Right cursor
key
Francais
TAB key Function key Down cursor
key
Alpha key, toggle
between numeric and
alphabetic entry modes
Home key Left cursor
key
~Alphanumeric keys Programmable
key
ѝ᮷ㆰփ
Menu key
Trigger Key
For Qwerty Keypad
Key Description Key Description Key Description
ύЎ(ᕷᡏ)
Key Description
Power key Back key Up cursor key ~ Alphanumeric
keys
Enter key Backspace key Right cursor key Menu key
Function key Down cursor keyTAB key Home key
Trigger Key Left cursor key

Using Function keys
Press the / key once, it will appear a blue symbol in the status
bar at the top of the screen. Then you can refer to the following table to
execute the desired function or input.
Function key definition
English
For Numeric Keypad
Description Key DescriptionKey
11
Decrease screen
backlight brightness Back TAB
Increase screen
backlight brightness
Deutsch
TAB key
Keypad backlight toggling
Espanol
For Qwerty Keypad
Key Description Key Description
input symbol @ Numeric Key 0~9
input symbol ( input symbol _
input symbol ? input symbol !
input symbol ) input symbol “
input symbol ‘ input symbol &
Back TAB input symbol #
Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
input symbol * input symbol +
input symbol / input symbol $
input symbol - input symbol =
input symbol : input symbol %

The following table indicates how to quickly execute useful functions using
numeric keypad combination. Press and hold the / key, and then
press the corresponding key to execute the desired function.
Numeric Keypad Combination
English
For Numeric Keypad
Description Key Description Key
12
Deutsch Espanol Francais ѝ᮷ㆰփύЎ(ᕷᡏ)
+Screen backlight
toggling +Task manager execution
+Keypad backlight
toggling +ScanService
+
Increase screen
backlight
brightness
+Power management
+
Decrease screen
backlight
brightness
+Settings
For Qwerty Keypad
Key Description Key Description
+Screen backlight
toggling + Task manager execution
+Keypad backlight
toggling + ScanService
+
Increase screen
backlight
brightness
+ Power management
+
Decrease screen
backlight
brightness
+ Device information

13
Using Alpha keys
Press the key , it will appear a red symbol in the status bar at the top of
the screen. Then you can refer to the following table to execute the desired
function or input.
English
When the PA692A turns on, the numeric mode is on by default. When you
toggle to alpha mode, the CAPS mode is off by default. Use the Alpha key to
toggle to CAPS.
Alpha On
Key Alpha Off
CAPS Off CAPS On
0 Space, @, $, “, 0 Space, @, $, “, 0
1 +, -, \, %, 1 +, -, \, %, 1
2 a, b, c, 2 A, B, C, 2
3 d, e, f, 3 D, E, F, 3
4 g, h, i, 4 G, H, I, 4
Deutsch Espanol Francais
5 j, k, l, 5 J, K, L, 5
6 m, n, o, 6 M, N, O, 6
ѝ᮷ㆰփ
7 p, q, r, 7 P, Q, R, 7
8 t, u, v, 8 T, U, V, 8
ύЎ(ᕷᡏ)
9 w, x, y, z, 9 W, X, Y, Z, 9
# , ; ! . / , ; ! . /


1. Paket

14

English
Bitte stellen Sie sicher, dass die folgenden Inhalte im PA692A Geschenkpaket
enthalten sind.
Wenn etwas fehlt oder beschädigt ist, kontaktieren Sie bitte Ihren unitech
Vertreter.
Der Standard Lieferumfang
Deutsch
 PA692A Gerät
 Akku
 Stecker+ Netzteil
 Handschlaufe
 USB kabel
Espanol
 Erklärungen zur Zulassungskonformität
Optionales Zubehör:
 Fahrzeughalterung (Car Kit)
Francais
 Einzel-Slot USB Halterung
 RS232 kabel
Einzel-Slot Ethernet Halterung
 4 Slot Multischacht Ethernet Halterung
 4 Slot Akkuladegerät
ѝ᮷ㆰփ
 Pistolengriff
 Kopfhörer
ύЎ(ᕷᡏ)


2. Produktdetails
15

EnglishDeutschEspanolFrancaisѝ᮷ㆰփύЎ(ᕷᡏ)
8
1
3
2
5
4
1

PA692A Vorder- und Rückseite


  










13


7
8
9
10
11
12
13
6




1LED-Anzeigen 8 Batteriefachabdeckung
2 LCD Touchscreen 9 Antenne
3 Tastenfeld 10 Lautsprecher
4 Empfänger 11 5-Megapixel / AF-Kamera
5 Universalanschluss 12 LED Blitzlicht
6 Barcodescanner Fenster 13 Batteriefachaussparung
7 Kopfhörerbuchse


PA692A Linke und Rechte Seite


English


16
DeutschEspanolFrancaisѝ᮷ㆰփύЎ(ᕷᡏ)
4
1
5
3
2

1 Scanner Auslösetaste 4 Kameramodus
2 Lautstärketaste oben/unten 5 MicroSD-Kartensteckplatz
3 Vibration/Stumm Modus


3. Erste Schritte

Einsetzen der Batterie 
English
Eine Backup-Batterie ist in Ihrem Gerät integriert, um einen Datenverlust zu
verhindern, wenn die Hauptbatterie entfernt wird oder vollständig entladen ist.
Diese Backup-Batterie wird die Daten und die Systemeinstellungen bis zu 2
Stunden lang beibehalten, wenn die Hauptbatterie entfernt wird.
1. Öffnen Sie die Abdeckung der
Batterieabdeckung, indem Sie die
Verriegelungen an beiden Seiten in
die Richtungen der Pfeile schieben
und dann die Abdeckung
abnehmen.
Deutsch

Batteriefachaussparung
Espanol
2. Drücken Sie die Backup-Batterie
nach oben und den Schalter in die
Position „EIN“, indem Sie die Spitze
eines Stiftes verwenden, um die
Backup-Batterie einzuschalten. 
Backupbatteries
chalter
Francais
3. Schieben und legen Sie die Batterie
ein und stellen Sie sicher, dass die
Kontakte der Batterie mit den
Kontakten im Fach verbunden sind.

ѝ᮷ㆰփ
Batteriefachko
ntakte

4. Drücken Sie die Batterie fest hinein. Plastiklasche
ύЎ(ᕷᡏ)
5. Bringen Sie die Abdeckung des
Batteriefachs wieder an, indem Sie
die Verriegelungen nach unten
drücken und Sie sie wie abgebildet
wieder zurück in ihre Positionen
schieben. 
17


18

EnglishDeutschEspanolFrancaisѝ᮷ㆰփύЎ(ᕷᡏ)
HINWEIS: Stellen Sie sicher, dass die Abdeckung des Batteriefachs fest verschlossen ist.
Anderenfalls lässt sich das Gerät vielleicht nicht EIN schalten.
HINWEIS: Laden Sie das Gerät mit der Hauptbatterie mindestens 24 Stunden lang auf, damit
die Backup-Batterie eine Reservestromversorgung bieten kann.
HINWEIS: Schließen Sie die Abdeckung des Batteriefaches nach dem Einsetzen der Batterie,
um zu gewährleisten, dass das Gerät ordnungsgemäß gestartet werden kann.
WARNUNG! Es besteht das Risiko eines Feuers, wenn der Akku unsachgemäß gehandhabt
wird. Den Akku NICHT öffnen, quetschen, stechen, Kontakte kurzschließen oder
in Feuer oder Wasser entsorgen. NICHT versuchen den Akku zu öffnen oder
reparieren. Entsorgen Sie verbrauchte Batterien gemäß den örtlichen
Recyclingvorschriften.