Unitech PA968 User manual

Open Battery Cover
1
Insert SIM Card Insert Battery
32
3. Insert SIM card into the
card slot with the gold
contacts facing down.
4. Lower the SIM card door
to the closed position and
slide to the right to lock.
1. Unlock the SIM card door
by sliding it to the left.
2. Lift the right edge of the
SIM card door upward.
1. Turn the PA968 so the screen and keypad are facing down.
2. With the back of the PA968 facing you,
unlock the two battery cover latches by turning
them inward (as shown in the diagram to the right).
3. Lift the battery cover upward and remove.
1. Insert the battery with
the gold contacts of
the battery in alignment
with gold battery
compartment contacts.
2. Ensure the plastic
battery release tab is
visible and accessible
prior to pressing the
battery into place.
3. Slide the battery cover
into place. Press down
on the latches and turn
outward to lock the
cover in place.
PA968 SIM Installation
Quick Start Guide
www.ute.com
1
alpha
TAB
tuv
8
FUNC
H1
0
abc
2def
3
ghi
4jkl
5
mno
6
pqrs
7
wxyz
9
ESCEnter
H2

Plug In
4Power On 5
1. Press the power button to turn on the PA968.
2. Follow the on-screen calibration and start up
instructions.
Power Button
1. Insert the power/communication connector
on the USB charging cable into the bottom
of the PA968.
2. Insert the AC adapter cable into the power jack
on the USB charging cable.
3. Plug the AC adapter into an electrical outlet.
ESC
ghi jkl
mno
wxyz
Enter
TAB
FUNC
tuv
pqrs
alpha
abc
H1 H2
def
1
4
7
2
5
8
0
3
6
9
Select 3.5g Connection
6Configure Properties 7
1. Choose Start > Settings >
Network and Dial-up
Connections.
2. Click and hold to select
“Properties” of
3.5G_Connection.
1. Select Configure. 2. Select “Call Options” tab.

Specify Call Options
8Power On Modem Module
1. Select the icon.
2. Select Power On
3. Select Open Connection.
9
1. Under “Extra Settings” type in
modem dialing string:
+cgdcont=1,”ip”,”m2m.t-mobile.com”;
^scfg=radio/band,12
2. Press OK.
3. Close all windows.
4. Choose Start > Programs >
GPRS > 32WANRAS
Open Connection
10
1. Click Connect. 2. Click OK when status is
connected.
Configure Browser
11
1. Launch Internet Explorer.
2. You will see the default
Windows start page.
3. Choose View > Internet Options.
The Unitech Prepaid Data Plan allows
for 500K/month. Browser configuration
is recommended to prevent users from
exceeding the monthly data limit.

Disable Multimedia Self-Test
1. From the Internet Options
screen, select the
Advanced tab.
You will need to scroll to the right
to access the Advanced tab.
2. Scroll down to Multimedia
and uncheck the top four
options. Click OK.
Disabling these features helps limit
data use when browsing.
1. To test your connection,
visit the Unitech test site:
www.ute.com/sim/test.html
12 13