UNITED OFFICE UAVS 300 A1 Product information sheet

IAN 314014
CROSS-CUT SHREDDER UAVS 300 A1
CROSS-CUT SHREDDER
Operating instructions and safety instructions
KREUZSCHNITT-AKTENVERNICHTER
Bedienungsanleitung und Sicherheitshinweise

GB/IE/NI Operating instructions and safety instructions Page 1
DE/AT/CH Bedienungsanleitung und Sicherheitshinweise Seite 17
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Gerätes vertraut.

power
overheat

GB│IE│NI │ 1■
UAVS 300 A1
Contents
Introduction ..............................................2
Proper use................................................2
Package contents and transport inspection.....................2
Appliance description ......................................3
Technical data.............................................3
Safety information .........................................4
Assembly.................................................6
Transport.................................................7
First use ..................................................7
Operation ................................................8
Switching the appliance on ............................................8
Inserting paper ......................................................8
Inserting credit cards .................................................9
Inserting a CD ......................................................9
Clearing a material blockage..........................................10
Turning the appliance off .............................................10
Overheating protection ..............................................10
Emptying the waste collectors...............................11
Cleaning ................................................11
Storage when not in use ...................................12
Troubleshooting ..........................................12
If there is a jam in the appliance .......................................12
If the appliance suddenly stops working .................................12
If the appliance cannot be switched on ..................................13
Disposal.................................................13
Disposal of the appliance.............................................13
Disposal of the packaging ............................................13
Appendix ...............................................14
Kompernass Handels GmbH warranty ..................................14
Service ...........................................................15
Importer ..........................................................15

■ 2 │ GB│IE│NI UAVS 300 A1
Introduction
Congratulations on the purchase of your new appliance.
You have chosen a high-quality product.
The operating instructions are part of this product. They contain
important information on safety, usage and disposal. Before using the product,
please familiarise yourself with all operating and safety instructions. Use the
product only as described and for the range of applications specified. Keep
these operating instructions as a reference and store them near the product.
Please also pass these operating instructions on to any future owner.
Proper use
This appliance is intended for shredding paper, credit cards, CDs/DVDs as well
as small staples (sizes: 24/6 and 23/6 (11.5 x 6 mm), B-8 (11.5 x 7 mm),
No10 (8.4 x 5 mm) and paper clips (up to 25 mm) in private households.
The appliance is not intended for any other purpose, nor for use beyond the
scope described. The appliance is not intended for use in commercial or industrial
environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifications
or the use of unapproved replacement parts. The risk is borne solely by the user.
Package contents and transport inspection
DANGER
► Do not allow children to play with packaging materials.
There is a risk of suffocation.
♦ Remove all parts of the appliance and the operating instructions from the
carton.
♦ Remove all packaging materials from the appliance.
Check the contents of the package. The following components are included in
delivery:
●Appliance base
●Cutter attachment
●Large waste collector
●Small waste collector
●4 x castors
●Operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defec-
tive packaging or during transport, contact the Service hotline (see section
Service).

GB│IE│NI │ 3■
UAVS 300 A1
Appliance description
(See fold-out page for illustrations)
1Power cable
2Cutter opening for CDs/credit cards
3Cutter attachment
4Safety switch (built-in)
5Integrated carrying recesses (left and right)
6Power lamp
7Overheat lamp
8REV/OFF/AUTO/FWD switch
9Cutter opening for paper
0Rollers (2x)
qCastors with locking lever (2x)
wSmall waste collector (for CDs/credit cards)
eLarge waste collector (for paper)
rViewing window
tAppliance base
Technical data
Power supply 220–240 V ~(AC), 50 Hz
Nominal current 1.3 A
Rated power 300 W
Protection class II/ (double insulation)
Collector capacity
Paper 15 litres
Cutting process for paper Cross-cut, 5 x 18 mm particles
Safety level 4
Working width of cutter
opening for paper/CD 225 mm/128 mm
Paper cutting capacity 10 sheets (80 g/m2)

■ 4 │ GB│IE│NI UAVS 300 A1
Safety information
The following safety instructions must always be followed when using electrical
appliances:
DANGER! RISK OF ELECTRIC SHOCK!
► Do not use the appliance if the power plug or the power cable is damaged.
To prevent accidents, have defective plugs and/or power cables replaced
immediately by an authorised specialist technician or our Customer Service
department.
► Appliances which do not work properly or have been damaged must be
checked immediately and repaired by Customer Service.
► Do not expose the appliance to rain, and never use it in a humid or wet
environment.
► Take steps to ensure the power cable never becomes wet or moist during
use. Never touch the plug or the appliance with wet hands.
► Do not kink or crush the power cable or place heavy objects on it. Route
the power cable so that it does not come into contact with hot surfaces.
► Do not place the appliance in the direct vicinity of any sources of heat or
water. There is a risk of fire or of receiving an electrical shock!
WARNING! – RISK OF INJURY!
► Only one person should operate the shredder at a time.
► Never leave the appliance unattended during operation.
Keep loose clothing, long hair, jewellery, etc. at a safe
distance from the cutter opening.
Never insert your fingers into the cutter opening.
Keep children away from the appliance. They could hurt themselves.
► Do not use the appliance in dusty or explosive environments (ignitable
gases, vapours or vapours from organic solvents). Risk of explosion!
► Never insert your finger into the central hole of a CD when you are feeding
it into the appliance.
► Keep pets away from the appliance. They could hurt themselves.

GB│IE│NI │ 5■
UAVS 300 A1
WARNING! – RISK OF INJURY!
► This tool is not intended for use by persons (including children) with limited
physical, physiological or intellectual abilities or lack of experience and/
or knowledge, unless they are supervised by a person who is responsible
for their safety, or receive instructions from this person on how to use the
appliance.
► The packaging material can be a source of danger for children. Dispose
of the material immediately after unpacking or keep it in a safe place not
accessible to children.
► Route the power cable in such a way that no one can tread on it or trip
over it.
CAUTION! PROPERTY DAMAGE!
► Do not use the appliance outdoors. The appliance could be irreparably
damaged!
► Do not overload the appliance. The paper shredder is designed for brief
operating periods.
► Never use the paper shredder for purposes for which it is not designed or
intended.
NOTES ON SAFE USE
► Always position the appliance close to a power socket. Do not use an
extension cable. Ensure that the appliance and the power socket are easily
and quickly accessible in the event of an emergency.
► In case of danger, pull the plug out of the power socket immediately.
► Remain alert at all times! Always pay attention to what you are doing and
always use common sense. Do not use the appliance if you are distracted
or feeling unwell.

■ 6 │ GB│IE│NI UAVS 300 A1
Assembly
WARNING! – RISK OF INJURY!
► Do not connect the appliance to a power socket during assembly.
► The cutting blades in the cutter attachment 3 of the appliance are very
sharp. Take extreme care when assembling the appliance.
♦ Place the appliance base tflat on the floor with the rear side downwards.
♦ Fit the plain castors 0on the front and the castors with locking levers q
on the rear of the base t. Press the castors into the holes on the appliance
base tuntil you hear them click into place (see fig. 1).
Fig. 1 Fig. 2
♦ Place the appliance base ton the castors after fitting them.
♦ Hold the cutter attachment 3by the two integrated carrying recesses 5
and position it over the appliance base tso that the power cable 1 points
backwards and the opening in the appliance base t points forwards.
♦ Press the cutter attachment 3firmly downwards until you hear it lock into
place on the appliance base t(see fig. 2).
♦ Place the small waste collector win the large waste collector e(see fig. 3).
Fig. 3 Fig. 4
♦ Slide the large waste collector efully into the appliance base t(see fig. 4).

GB│IE│NI │ 7■
UAVS 300 A1
NOTE
► The large waste collector emust be pushed fully into the appliance base t
until you hear it click into place. Otherwise, the appliance will not start!
► The safety switch 4will not be deactivated until the large waste collector
e has been pushed in correctly, allowing the appliance to be used.
Transport
♦ The appliance comes with four castors 0/qfor easy transport. Release
the levers on the two castors with locking levers qby pushing the levers
upwards (see fig 5). The appliance can now be rolled conveniently.
♦ Press the levers on the two castors with locking levers qdownwards once
you have parked the appliance in order to prevent the appliance from rolling
away (see fig. 6).
Fig. 5 Fig. 6
NOTE
► Use the castors only on even surfaces. Do not roll the appliance over
shag-pile carpets (e.g. flokati, tufted). These could block the castors.
► Always hold the appliance by the two integrated carrying recesses 5to
lift it up.
First use
NOTE
► Make sure the REV/OFF/AUTO/FWD switch 8is in the OFF position
before plugging the appliance into the power socket.
► Every shredder is tested for functionality after manufacture. It is possible
that you may find paper residue in the cutting blades.
♦ Insert the plug into a mains power socket.
Operation
Switching the appliance on
♦ Move the REV/OFF/AUTO/FWD switch 8 to the AUTO position for
shredding. The power lamp 6 lights up permanently blue and the
appliance is now ready for use.

■ 8 │ GB│IE│NI UAVS 300 A1
NOTE
► Make sure the large waste collector eis inserted correctly into the appli-
ance base tand has clicked into place! Otherwise the appliance will not
start! The power lamp 6 only lights up once the large waste collector e
is pushed all the way into the appliance base t.
Inserting paper
CAUTION! PROPERTY DAMAGE!
Never feed paper into the cutter opening 9if it still has paper
clips or staples larger than 25 mm attached! These could damage
the cutting blades.
NOTE
max.
x 80g/m2
10
You can shred up to 10 sheets (80 g/m2paper) at the same time.
Insert paper into the middle of the cutter opening for
paper 9from above and in portrait format (see fig. 7).
The appliance starts automatically and switches itself off
automatically if no further paper is inserted.
Fig. 7
NOTE
► Regularly remove any residue left in the cutting blades with a suitable
object (e.g. brush or tweezers). Ensure that the appliance is unplugged
before doing this.

GB│IE│NI │ 9■
UAVS 300 A1
Inserting credit cards
Insert the credit card from above into the middle of the
CD/credit card cutter opening 2(see fig. 8) and move
the REV/OFF/AUTO/FWD switch 8 to the FWD
(“forward”) position.
You can only shred one credit card at a time. Always insert
the card into the CD/credit card cutter opening 2with
the wide side first. Otherwise, the magnetic strip will not be
destroyed.
Fig. 8
NOTE
► Always insert the credit card into the middle of the CD/credit card cutter
opening 2. Otherwise, the shredding process will not start.
► If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper 9and move the REV/OFF/AUTO/FWD switch 8 to the FWD
position.
Note that the residue will then fall into the large waste collector e.
If necessary, empty this beforehand in order to keep paper and plastic
waste separate.
Inserting a CD
WARNING! RISK OF INJURY!
► Never insert your finger into the central hole of a CD when you are feeding
it into the appliance.
Insert the CD from above into the middle of the CD/credit
card cutter opening 2(see fig. 9). You can only shred
one CD at a time.
Fig. 9

■ 10 │ GB│IE│NI UAVS 300 A1
Clearing a material blockage
♦ Move the REV/OFF/AUTO/FWD switch 8 to the REV ("reverse") position
if the material being shredded causes a jam. The appliance now goes into
reverse and the material is ejected.
♦ Alternatively, move the REV/OFF/AUTO/FWD switch 8 to the FWD
("forward") position if the material causes a blockage. The appliance is now
in forwards operation and the material that is being shredded is pulled in
again.
♦ Move the REV/OFF/AUTO/FWD switch 8 to the OFF position as soon as
the jammed material has been ejected.
Turning the appliance off
NOTE
► We recommend that you switch off the appliance and let it cool down for
about 30 minutes after 3 minutes of operation to prevent overheating.
♦ Switch the appliance off by moving the REV/OFF/AUTO/FWD switch 8 to
the OFF position. The power lamp 6 goes out.
Overheating protection
This appliance is fitted with overheating protection. If the motor overheats due to
overloading, the appliance switches itself off automatically. The overheat lamp 7
lights up permanently red until the motor has cooled down sufficiently.
If this occurs, do the following:
WARNING! – RISK OF INJURY!
► Pull the power plug out of the power socket to prevent unintended starting
of the appliance.
♦ Switch the appliance off by moving the REV/OFF/AUTO/FWD switch 8 to
the middle OFF position.
♦ Empty the waste collectors w/e.
♦ Allow the appliance to cool down for about 30 minutes.
♦ Replace the plug in the mains power socket.
♦ Switch the appliance on by moving the REV/OFF/AUTO/FWD switch 8
to the AUTO position. The overheat lamp 7 no longer lights up once the
appliance has cooled down sufficiently.

GB│IE│NI │ 11 ■
UAVS 300 A1
Emptying the waste collectors
WARNING! RISK OF INJURY!
► Remove the power plug from the power socket to prevent the appliance
from accidentally switching on.
NOTE
► Empty the waste collectors w/e regularly to prevent the shredded
material from being drawn into the cutting blades from below.
► Dispose of the waste material in an environmentally-responsible manner.
♦ Pull the large waste collector eout of the appliance base t.
♦ Take the small waste collector wout of the large waste collector e.
♦ Empty the large waste collector eand small waste collector wseparately.
♦ Place the small waste collector wback in the large waste collector e
(see fig. 3).
♦ Slide the large waste collector efully into the appliance base tagain
until you hear it click into place (see fig. 4).
Cleaning
DANGER! RISK OF ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance. There is a risk of
electric shock!
WARNING! RISK OF INJURY!
► The appliance becomes hot during use. Allow the appliance to cool down
completely before cleaning it.
► Do not touch the cutting blades of the appliance with your fingers.
The cutting blades are very sharp!
CAUTION! PROPERTY DAMAGE!
Do not spray any oil or other lubricants into the cutter openings 2/9.
These can irreparably damage the appliance.
► To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.

■ 12 │ GB│IE│NI UAVS 300 A1
♦ Remove any residue left in the cutting openings 2/9 or cutting blades
with a suitable object (e.g. brush or tweezers). Ensure that the appliance is
unplugged before doing this.
♦ Clean the surfaces of the appliance with a soft, dry cloth.
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues from the appliance surface.
Storage when not in use
♦ If you decide not to use the appliance for a long period, disconnect it from
the mains power supply and store it in a clean, dry place away from direct
sunlight.
Troubleshooting
If there is a jam in the appliance
This means that you may have attempted to feed too much paper into the appli-
ance (max. 10 sheets 80 g/m2paper).
♦ Move the REV/OFF/AUTO/FWD switch 8 to the REV position if the paper
causes a blockage. The appliance now goes into reverse and the material is
ejected.
♦ Alternatively, move the REV/OFF/AUTO/FWD switch 8 to the FWD
position if the paper causes a blockage. The appliance is now in forwards
operation and the material that is being shredded is pulled in again.
♦ Pull the paper out of the appliance and then move the REV/OFF/AUTO/
FWD switch 8 to AUTO.
The appliance is now ready for use again.
If the appliance suddenly stops working
This means that the appliance has overheated and the automatic safety cut-out
has activated itself. The overheat lamp 7 lights up permanently red.
♦ Move the REV/OFF/AUTO/FWD switch 8 to the OFF position.
♦ Remove the plug from the mains power socket.
♦ Allow the appliance to cool down for about 30 minutes.
♦ Replace the plug in the mains power socket.
♦ Switch the appliance on by moving the REV/OFF/AUTO/FWD switch 8
to the AUTO position. The power lamp 6 lights up permanently blue.
The overheat lamp 7 remains off when the appliance has cooled down
sufficiently.

GB│IE│NI │ 13 ■
UAVS 300 A1
If the appliance cannot be switched on
♦ Make sure the cutter attachment 3 is fitted correctly on the appliance base t.
♦ Make sure the waste collector e is pushed all the way into the appliance
base t.
♦ Try a different socket.
♦ The appliance is possibly defective. Have the appliance checked by a
qualified technician.
♦ The appliance has overheated and triggered the automatic safety cut-out.
Proceed as described in the section above If the appliance suddenly stops
working.
Disposal
Disposal of the appliance
The adjacent symbol of a crossed-out wheelie bin means that this appliance is
subject to Directive 2012/19/EU. This directive states that this appliance may
not be disposed of in normal household waste at the end of its useful life, but
must be brought to a specially set-up collection point, recycling depot or disposal
company.
This disposal is free of charge for the user. Protect the environ-
ment by disposing of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the product.
Disposal of the packaging
The packaging materials have been selected for their environmental friendliness
and ease of disposal and are therefore recyclable.
Dispose of packaging materials that are no longer needed in accordance with
applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites

■ 14 │ GB│IE│NI UAVS 300 A1
Appendix
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights
are not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep
your original receipt in a safe place. This document will be required as proof of
purchase.
If any material or production fault occurs within three years of the date of purchase
of the product, we will either repair or replace the product for you at our discretion.
This warranty service is dependent on you presenting the defective appliance
and the proof of purchase (receipt) and a short written description of the fault
and its time of occurrence.
If the defect is covered by the warranty, your product will either be repaired or
replaced by us. The repair or replacement of a product does not signify the begin-
ning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and defects
present at the time of purchase must be reported immediately after unpacking.
Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines
and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or fragile parts such as
switches, batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the product
regarding proper use of the product are to be strictly followed. Uses and actions
that are discouraged in the operating instructions or which are warned against
must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications/repairs which have not been carried out by one of
our authorised Service centres.

GB│IE│NI │ 15 ■
UAVS 300 A1
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (e.g. IAN 12345) available
as proof of purchase.
■ You will find the item number on the type plate, an engraving on the front
page of the instructions (bottom left), or as a sticker on the rear or bottom of
the appliance.
■ If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals,
product videos and software on www.lidl-service.com.
Service
Service Great Britain
Tel.: [phone]
E-Mail: kom[email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kom[email protected]
IAN 314014
Importer
Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com

■ 16 │ GB│IE│NI UAVS 300 A1

DE│AT│CH │ 17 ■
UAVS 300 A1
Inhaltsverzeichnis
Einleitung................................................18
Bestimmungsgemäße Verwendung ..........................18
Lieferumfang und Transportinspektion .......................18
Gerätebeschreibung ......................................19
Technische Daten .........................................19
Sicherheitshinweise .......................................20
Montage ................................................22
Transport................................................23
Erste Inbetriebnahme......................................23
Bedienung...............................................24
Gerät einschalten ...................................................24
Papier einführen ....................................................24
Kreditkarte einführen ................................................25
CD einführen ......................................................25
Materialstau beheben ...............................................26
Gerät ausschalten ..................................................26
Überhitzungsschutz .................................................26
Auffangbehälter leeren ....................................27
Reinigung ...............................................27
Lagerung bei Nichtbenutzung...............................28
Fehlerbehebung ..........................................28
Wenn das Schneidgut im Gerät stecken bleibt.............................28
Wenn das Gerät plötzlich stehen bleibt ..................................28
Wenn sich das Gerät nicht einschalten lässt ..............................29
Entsorgung ..............................................29
Gerät entsorgen ....................................................29
Verpackung entsorgen ...............................................29
Anhang .................................................30
Garantie der Kompernaß Handels GmbH................................30
Service ...........................................................31
Importeur .........................................................31