Universal Remote Control TOTAL CONTROL TKP-7500 User manual

Owner's Manual
TKP-7500
n-Wall Network
Color Touchscreen

TKP-7500 Owner's Manual ©2013 Universal emote Control, Inc.
The information in this owner’s manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent
from Universal emote Control, Inc.
UNIVE SAL EMOTE CONT OL, INC. SHALL NOT BE LIABLE FO
OPE ATIONAL, TECHNICAL O EDITO IAL E O S/OMISSIONS MADE IN
THIS MANUAL.
The information in this owner’s manual may be subject to change without prior
notice.
U C - Control the Experience is a registered trademark of Universal emote
Control, Inc.
Total Control is a registered trademark of Universal emote Control, Inc.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
Universal emote Control,Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: [phone] Fax: [phone]

TAB E OFCONTENTS
Introducing the TKP-7500 1
Parts ist 3
Installing the TKP-7500 4
Installation 4
Adjusting User Settings on the TKP-7500 5
Specifications 14
imited Warranty Statement 15
End User Agreement 17
Federal Communication Commission
Interference Statement 18
Regulatory Information to the user 19

Page 1
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN
Introducing the TKP-7500
Thank you for purchasing URC's TKP-7500 n-Wall Network Color
Touch-screen keypad. ts easy intuitive use will help simplify your life
while adding control of more things than you thought possible.
Enjoy some key features like:
Rooms Menu
With the touch of a single button, take control of your domain.
Besides the ability to temporarily link the different rooms/areas of your
system for music listening, the Rooms Menu offers a snapshot of “what's
going on” in every room of your Total Control system. Better yet, tapping
on a room will convert your keypad into a controller for THAT room.
See how easy it is to keep track of what's happening in your world…
and control it!
Shortcuts Pop-Up
With all of the different options to choose from, the Shortcut Pop-
Up allows you to save some of the most common devices/activities
for easy selection. Keep up to 6 different activities at your fingertips
with the Shortcuts Pop-Up menu.

Capacitive Touch screen
Navigation just became easier; it's as simple as a “swipe” or “flick”.
By incorporating gesture control, every screen can be explored by
simple finger swipes while the on-board accelerometer supports
flicking.
Time & Weather Module
A simple button press opens the Time & Weather Module; a full
screen display keeping you “up to date” with today's time, date and
weather conditions.
Page 2
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN

Page 3
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN
Parts ist
The TKP-7500 Network Keypad includes:
1 - TKP-7500 4 - Mounting Screws
1- Mounting Ring 1 - Owner’s Manual
TKP-7500 Mounting ing
4 Mounting Screws
Owner’s Manual

Page 4
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN
Installing the TKP-7500
The TKP-7500 is wall-mountable and fits easily into a dual-gang
opening. Prior to installation, make sure power is available at the
preferred location.
Power can be supplied to the TKP-7500 through an Ethernet cable
connected to a PoE (power over ethernet), in either of the following
ways:
=Router/Switch
=njector
Power over Ethernet or PoE technology describes a system to pass
electrical power safely, along with data, on Ethernet cabling. The
IEEE standard for PoE requires Category 5 cable or higher for high
power levels.
Installation
Follow the diagram below for installation:
1. Make sure the dual-gang opening is fitted with a standard
two-gang trim box (available from the local electrical
supplier/store)
2. Connect the Ethernet cable to the rear of the supplied TKP-7500
wall-plate.
3. Mount the wall-plate to the two-gang retro-box
4. The TKP-7500 easily snaps into place to the wall-plate.

Page 5
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN
Adjusting User Settings on the TKP-7500
By pressing and holding the Main and Mute buttons for 5 seconds
(found in the Core Menu) simultaneously the TKP-7500 Settings
Menu will appear.
Simultaneously press both the Main and Mute buttons to activate
the Settings Menu.
Settings Menu
The Settings Menu allows you to adjust some basic parameters of
the TKP-7500 keypad.
Select these options by pressing the appropriate icon. f no
icon/button is pressed for 45 seconds, the unit will revert back to
the Main screen.
The Settings Menu is broken down into the following categories:
Sleep Settings: Manages how long the LCD remains ON after
usage.
General: Contains settings for Time, Date and Temperature Scale
Sound: Allows control of any confirmation beeps, or the ability
to disable these tones.
Brightness: Easily adjust the LCD screen's brightness level, and
enable/disable the light sensor.
Vibration: Adjust the touch screen’s vibration sensitivity.
System: Quickly view the Memory Usage, Firmware Version
and other details about the TKP-7500.
Network: View information about the current network as well
as set a Dynamic or static P address for the TKP-7500.
Factory Default: Reset the TKP-7500 to factory settings.

Page 6
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN
Sleep Settings
Decide upon the option that best fits the current needs.
CD Screen is always ON: This option keeps the LCD screen
illuminated at all times
CD Screen will turn OFF: This option allows the user to decide on
the amount of time that the LCD screen will remain illuminated
after it is last used. The + and – buttons will adjust the time frame
up or down accordingly.
CD Screen will display a screen saver
This option will display a screen saver of the photos found on the
online website, Picassa. This will start display after the time frame
selected in the Start After box, and will continue for the amount of
time dictated in the Duration box.
Selecting OK will accept any changes made and return to the Main
menu, as well as selecting Cancel will return the user to the Main
menu, without incorporating any changes.

Page 7
TKP-7500 IN-WA NETWORK CO OR TOUCHSCREEN
General
The General settings screen allows for setting the Time, Date and
decide on the scale used to display the temperature(Fahrenheit/Celsius).
To view the rest of the General settings menu, be sure to scroll up/down.
Using the arrow found at the left and right sides of each property
(hour, minutes, month, etc.) adjusts the value up, or down, respectively.
Selecting OK will accept any changes made and return to the Main
menu, as well as selecting Cancel will return the user to the Main
menu, without incorporating any changes.