Univex 1404 User manual

1404/1405/1406
PATTY PRESS
OPERATORS
MANUAL
WE THANK YOU FOR YOUR PURCHASE OF OUR
MODEL 1404/1405/1406 PATTY PRESS
All of us
at Univex
1404/1405/1406 12/09 ED 1

INSTRUCTION MANUAL
INTRODUCTION
The Univex model 1404, 1405 nd 1406 P tty Presses re designed to press
h mburger me t into p tties. The 1404 P tty Press produces 4 inch di meter p tty,
the 1405 P tty Press produces 5 inch di meter p tty nd the 1406 P tty Press
produces 6 inch di meter p tty.
The Univex P tty Press c n be used to form p tties of food products other th n
h mburger such s: cr b c kes, fish c kes nd veget ble burgers.
The thickness of the p tties produced is determined by the mount of h mburger or
other food products pl ced in the press.
This m nu l cont ins instructions for the inspection, s fe oper tion, c re nd
m inten nce of the P tty Press.
INSPECTION
The 1404, 1405 nd 1406 P tty Press is inspected nd tested t the f ctory. The
person opening the shipping c rton should re-inspect the P tty Press immedi tely
upon receipt for loose, d m ged or missing p rts. Any d m ges should be reported to
the c rrier immedi tely nd ny short ges of p rts should be reported to your de ler or
directly to Univex Corpor tion Customer Service Dep rtment.
P ge 1

OVERALL VIEW OF PATTY PRESS
FIGURE 1
FORMING DISH
TOP PRESS PLATE
FILM DIVIDER HOLDER
RELEASE BUTTON
WAX PAPER OR
HANDLE
BOTTOM PRESS PLATE
(IN UP POSITION)
Page 2

OPERATORS INSTRUCTIONS
1. Push the h ndle ll the w y b ck (see figure 1).
2. Pl ce b ll of h mburger me t on the bottom press pl te.
3. Press the rele se button to lower the press pl te into the forming dish.
4. Pull the h ndle ll the w y forw rd nd pply light pressure to form the p tty.
5. Push the h ndle ll the w y b ck. The press pl te rises utom tic lly for e sy
remov l of the formed p tty.
6. Repe t steps 1-5 for e ch p tty.
If you pl n to st ck finished p tties for future use, pl ce film or p per divider
(provided with the P tty Press) on the press pl te before lo ding it with h mburger
me t.
A working supply of dividers c n be kept in the film divider holder bove the top press
pl te (see figure 1).
CLEANING
To void d m ging the P tty Press’s high polished finish, never put ny of the
components through dishw shing m chine. W sh the P tty Press with mild so p
nd w ter solution. Use brush in sm ll re s. Dry components with soft dry cloth.
Page 3

Warranty
The Univex 1404/1405/1406 Patty Press is warranted by
Univex Corporation against any defects in materials or
workmanship for a period of 6 months from the date of
purchase by the end user Please call the Univex Warranty
Service Department at 800-258-6358 to report warranty
claims before arranging for repair of the unit The unit must
be delivered to a Univex authorized service agent or to the
Univex facility for warranty repairs The end user is respon-
sible for all shipping or travel charges arising from the
repair or servicing of this unit under warranty Univex will
not cover overtime charges of any kind Any service or
repair must take place in the United States
Damages incurred in transit or incurred because of
installation error, accident, alteration or misuse are not
covered Transit damages should be reported to the carrier
immediately
Univex will not be liable for any consequential,
compensatory incidental or special damages
Toll free ordering fax [phone]
3 Old Rockingham Road, Salem, N H 03079-2140 Telephone [phone] Fax [phone]