Connect Your Phones
IOS Android
Configuring your phone
Network Settings
Press the Menu(OK)>System Settings>Advanced
Settings(Default password is empty, press OK to
enter)>Network>IP Settings. Select your
network type: Static IP/ DHCP/ PPPoE.
Choose STATIC press Navigation key - to the next,
see the IP address settings, the IP and gateway
settings and other related network information.
Entry “.” use the key of “*”, then confirm.
Select PPPoE username and password to register.
Select DHCP needn't to setting IP.
Account Settings
Press the Menu(OK) > System Settings >
Advanced Settings(Default password is empty,
press OK button to enter) > SIP > SIP Accounts >
Select the SIP Line > configure your necessary
parameters, such as username, password and sip
server address.
Type the IP address of your SIP server (you can
type “.” by “*” button，you must confirm the
connection between the phone and SIP server)，
And then select Submit changes，and press OK
button to submit the changes.
MPL Settings
MPL(Mobile Phone Line), dock your mobile
phone as a line.
Step1: Enable/disable MPL, press Menu(OK) >
System Settings > Advanced Settings(Default
password is empty, press OK button to enter) >
MPL .
Step2: Change the SIP line account model as “MPL”.
Press the Menu(OK) > System Settings > Advanced
Settings(Default password is empty, press OK
button to enter) > SIP > SIP Accounts, press OK
button to submit the changes.
Step3: Turn on your mobile phone's Bluetooth
feature, find the bluetooth list e.g “016B0A-U7KS”
and make connection. And then you can use MPL
line to make a call or conference or transfer.
Placing a call
You can pick up the handset or press Headset/
Speaker button to place a call.
Dial directly: Dial number directly, then press #
button or Send soft-key (it will call from the first
available line);
Redial: Press Redial button/soft-key to dial the
latest number;
Dial from Call history: Press Menu button, select
“Call history ” and select one of “Missed calls”, “
Received calls” and “Dialed numbers” lists to dial
by pressing Dial soft-key.
You can open Call history in standby status of
phone by pressing corresponding Navigation-
buttons, for example , Left button : “Received
Calls” list ; Right button : “Dialed Numbers” list ;
Down button : “Missed Calls” list . UP button :"
all calls" ;"OK" button to confirm the key ;
next to the "C" key for the Cancel button.
EP+ APP Settings
You can download the Android/IOS EP+ APP by
scanning the QR code below. After EP+ APP
installed, you can follow the first installation
guide to operate:
A)Mobile phone need to be connected to LAN by
using WIFI.
B)Using EP+ APP to scan/mannually input the IP
Phone MAC code.
C)Find the EP+ APP password from IP Phone's LCD
menu or WEB. LCD: Press C > View Status > EP+
Password. WEB: Login WEB > Phone Setting > EP+.
And then input the password into the EP+ APP.
D)Press Login button.
Note: EP+ setting mode default is automatic. For
more information, refer to EP+ user manual.
UNIV OIS LIMITED
Tel: (86)20-82320720 E-mail: sales@univois.com Web:www.univois.com
（CHIN A）
Dock IP Phone U7KS
www.univois.com Applies to firmware version V1.0.0 or later.
You can configure the IP phone via LCD menu or web user interface.
*Default username and password are admin/admin for web page.
*For more information,refer to the User Guide or
Configuring via web user interface
Quick Operation Guide
Message Hold
Redial Transfer
5JKL
9WXYZ
8TUV
7PQRS
6MNO
3DEF2ABC
1
0SEND
