Uplift Desk PDC010 User manual

© UPLIFT Desk • 800-349-3839 • [email protected] • upliftdesk.com
Package Contents
Wireless Charging Power Hub
SKU: PDC010
Step 1
Place the unit on a at, stable surface in a location where it cannot
be knocked and present a hazard.
Note: The power cord is heavy duty 14 AWG and it may be curled
due to shipping which could keep the unit from sitting at on the
desktop. You can work with the cord a bit to straighten the bends
so the unit will sit at.
Another way to help the unit sit at on the desktop is to use the
included Adhesive pads. They are sticky on both sides and will
hold your unit in place. Peel off the backing on one side and apply
the adhesive pads to the bottom of the unit. Then peel off the re-
maining backing and place the unit in the desired location.
If the Adhesive pads become too dirty to stick to your desktop,
you can remove them from the unit, rinse them with water, blot
dry with a clean, lint-free cloth, and place them back on the unit.
While it is possible to un-stick and reposition the unit, be aware
the more you reposition the unit, the more adhesive properties
will be lost.
Step 2
Plug it into a grounded power outlet. If the blue LED indicator light
comes on, then you know power is running to the unit.
To charge your devices, you have several options:
• Plug a USB cable into one of the three Smart ID USB ports
• Plug power cords and AC Adapters (2’’ wide and smaller) into
the two power outlets on either side of the unit to either charge
more devices or to power items on your desk such as lamps, mon-
itors, etc.
• Place your device on the unit horizontally as pictured, with the
backside touching the “wireless charge” area. We recommend re-
moving your device from its case for best charging performance.
Devices must support 10W fast wireless charging.
Note: Wireless charging may raise the unit’s temperature, this is
normal.
Adhesive pads
(optional, qty 2)
Power hub unit
2’’

© UPLIFT Desk • 800-349-3839 • [email protected] • upliftdesk.com
CAUTION: Read all instructions before use. Failure to operate properly may result in damage
or personal injury. Retain manual for future reference.
CAUTION: To avoid overheating and possible damage to this product and other equipment, do not
use to power a device which exceeds the designed ratings. Unplug if power cord becomes hot.
CAUTION: This product must be installed and/or used in accordance with the appropriate
electrical codes and regulations.
WARNING: Indoor use only. Avoid getting any liquid on the unit, as it can cause shock & re.
If unit gets wet, disconnect the power at the circuit breaker, fuse or outlet. Ensure the unit is
completely dry before connecting this product to a power source.
CAUTIONS & WARNINGS
!
!
!
!
!
WARNING: Maintenence should only be performed by qualied personnel only. Hazardous voltag-
es are present inside the unit during operation. Do not disassemble the unit. Please be sure to follow
all electrical safety precautions when servicing this unit. Unit should be disconnected from all power
sources prior to servicing to reduce the risk of electrical shock.
CAUTION: This unit needs a path to ground to work properly, and should only be plugged di-
rectly into a grounded outlet. Using any extension cord in conjunction with the unit will void all
UPLIFT warranties. All connected equipment should be plugged directly into your unit.
CAUTION: Keep unit away from children, pets, and sources of heat.
!
!
!
Copyright Notice: This guide is a component of this product. This guide is a part of the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be
forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.
©
AI-PDC010-1.0
Tech Specs
Please ensure that the total power rating of the devices you are
charging is within the power ratings below.
• Total USB port output: DC 5V 4.8A
• Max output per USB port: 2.4A
• Power rating: 125VAC, 15A, 1875W, 50/60Hz
• Wireless charging: DC 9V, 1.12A, 10W
• Wireless compatible phone models include but aren’t limited to:
iPhone XS, iPhone XS MAX, iPhone XR, iPhone 8 Plus,
iPhone X, iPhone 8
Samsung Galaxy Note9, Galaxy S9, Galaxy S9+, Galaxy
Note8, Galaxy S8, Galaxy S8+, Galaxy Note7, Galaxy S7 Edge,
Galaxy S7, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Gal-
axy Note5,
LG G7, G6, G6 plus, G3, G2, V30, V30plus, Vu 3, Vu 2 and
other Qi-enabled devices.