1.2 Appearance Introduction
- 3 -
Flicker Sensor
Opcal Sensor
Video Cam Lens
4.3" touch panelStrap Hole
Measure Key
Power buon
SD Card Slot
Reset Key
Baery Recharge
LED
Power On LED
Mini USB
Power Jack
Baery Cover
If the system crashes, please press the power key for 3 seconds to turn off the system.
If the problem still can’t be fixed, please use a pin to press the reset key to turn off the system.
1.
2.
English
1.3 Annual Product Calibration
As the product is a high-precision instrument, please use it cauously. To ensure the
accuracy of measurements, annual calibraon is recommended. Please consult the agent or
the customer service department for the calibraon service.
- 4 -
1.4 Product Notes and Precautions
1.
2.
Precautions / Warnings
Please read the following precauons to avoid fire, excessive heat, chemical leakage and
explosion :
■
■
■
■
■
■
■
■
■
MK350S Premium Spectrometer is a high-precision instrument. Please unpack with care.
Any vibraon or collision may cause instrument damage. If the product doesn’t work
normally or needs repair, please don’t aempt any repairs. All repairs must be
performed by the authorized customer service agent.
Most LCD screens have a very small and inconsequenal defecve pixel rate (usually less
than 0.1%). This results in occasional pinpoints of white or other colors but will not affect
the accuracy of measurements.
Do not disassemble or modify the baery.
Do not expose the baery to heat (fire) or water/moisture.
When disposing used/old baeries, wrap with insulaon tape to shield the baery from
electrical contact with metallic objects, which might ignite a fire or explosion.
If the unit is plugged into the power adapter and the baery seems to be overheang, or
if there is smoke or peculiar odors emanang from the unit, unplug immediately to avoid
the possibility of fire.
However, do not touch the cables if there is heat emanang from near the cables as
melted or deformed cables could expose wiring and result in burns or electric shock.
Do not use cloth or anything to wrap or cover the equipment while charging – this could
cause the unit to overheat, melng the casing or causing fire.
If the unit is accidently immersed in water, or if moisture has seeped inside, or metal
objects have dropped into the casing, immediately remove the baery to avoid fire or
electric shock.
Do not operate or store the baery in high-temperature environments-it will cause
baery leakage and/or shorten the life of the baery .
Do not use paint thinner, benzene or other organic solvents to clean the equipment –
this may damage the exterior finish or touch screen, and may even ignite fire.
