UREVO URTM006 User manual

URTM006 Foldi Mini
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás

2
English
3 –24
Čeština
24 –46
Slovenčina
47 –58
Magyar
69 –90

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
IMPORTANT SAFETY GUIDELINES
Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately after using and
before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
•An app liance should never be left unattended plugged in. Unplug from outlet
when not in use, and before putting on or taking off parts.
•Do not operate under blanket or pillow. Excessive heating can occur and cause
fire, electric shock, or injury to persons.
•Close supervision is necessary when this appliance is used by, on, or near
children, invalids, or disabled persons.
•Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by the manufacturer.
•Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the
appliance to a service centre for examination and repair.
•Do not carry this appliance by supply cord or use cord as a handle.
•Keep the cord away from heated surfaces.
•Never operate the appliance with the air openings blocked. Keep the air openings
free of lint, hair, and the like.
•Never drop or insert any object into any opening.
•Do not use outdoors.
•Do not operate where aerosol (spray) products are being used or where oxygen
is being administered.
•Caution - To reduce the risk of injury from moving parts - Unplug before
servicing.
•Warning - To reduce the risk of Electric shock - Unplug before cleaning or
servicing.
•Warning - Risk of personal injury - Keep children under the age of 13 away from
machine.
•To disconnect, turn all controls to the position, then remove plug form outlet.
•Connect this appliance to a properly outlet only. See grounding instructions.
•This appliance is not intended for use by persons with reduces physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Keep children under the age of 13 away from
this machine.
•The maximum weight capacity for this product is 265 lbs / 120 kg. DO NOT
EXCEED MAXIMUM WEIGHT CAPACITY.

5
GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided with
the product - if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
For EU safety instructions:
1. If the supply cord is damaged, it must be replaced by a special cord set available from
the manufacturer or its service agent.
2. The free area shall not be less than 0.6 metres greater than the training area in the
directions from which the equipment is accessed.
3. If any of the adjustment devices are left projecting, they could interfere with the user’s
movement.
4. Warning, that a folded treadmill should not be operated.
5. Warning, to allowing the running surface to come to a complete stop before folding.
6. Noise emission under load is higher than without load.
7. On airborne noise: ≤65dB.
8. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.

6
9. If the heart rate is displayed:
WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result
in serious injury or death. If you feel faint stop exercising immediately.
10. If equipped with a pull-cord safety stop:
An instruction on how to use, attach and test the pull-cord safety stop is required.
POWER SUPPLY PRECAUTIONS
•Use US: 120V~ 60Hz / EU: 220-240V~ 50-60Hz power supply.
•The power plug must be reliably grounded, and the socket must be equipped
with
•a dedicated circuit to avoid sharing a circuit with other electrical equipment.
•Directly plug the power cord firmly into the socket.
•Use a qualified socket to avoid dangers arising therefrom. If the plug does not
match the socket, do not use the plug and ask an electrician to handle it.
•Do not let the power cord contact the rollers. Do not put the power supply on the
running belt. Do not use any damaged plugs.
•Do not pull out or insert the power plug with wet hands.
•Pull out the plug from the socket before cleaning and maintenance.
•Check whether the treadmill functions normally before use. If normal, you can
use it, otherwise do not use it and contact our Customer Service Department in
time.
•Clip the safety lock wire to your clothes before exercise for emergency stop.
•Ensure that there is a 2000*1000mm vacant safe area without obstacles behind
the treadmill during exercise.
•In case of an abnormality, pull up with the handrail to keep your feet off the
running belt and jump out of the treadmill.
•If you feel dizzy, chest pain, nausea, or breathless during exercise, stop exercising
immediately and consult a fitness coach or doctor.
•Do not use this product outdoors, under high humidity or sunlight.
•Power off and unplug when you leave.
PRECAUTIONS FOR INSTALLATION
1. Read the instructions carefully before installation.
2. Take out all parts from the package and separately place them on the clean ground

7
for your overall check and easy installation.
3. Check whether all parts are complete according to the packing list.
4. Be careful when using tools or handling. Do not install the product by force
according to your preference.
5. Check whether tools and packaging materials left behind are dangerous. Plastic and
foam are harmful to children.
6. Install the product properly after carefully reading the steps and instructions in the
manual.
7. This product must be properly installed by an adult. If necessary, ask a professional to
install it.
Install the product properly and do not damage it.
IMPORTANT:
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
The specifications of this product may vary from this photo, subject to change without
notice.

8
PACKING LIST
PRODUCT ACCESSORIES
Treadmill
User Manual
TOOL PACK
Lubricating Oil × 1
Hexagon Knob A
( 58mm ) x 2
Hexagon Knob B
( 38mm ) x 2
Safety Key × 1
5mm L-type Inner
Allen key × 1
6mm L-type Inner
Allen key × 1
Multi-functional
Open-ended
Wrench × 1

9
PRODUCT OVERVIEW
Display Screen
Console
Armrest
Safety Key
Upright Column
Decorative Cover
Sidebar
Tread-Belt
Right Rear
Corner Guard
Left Rear
Corner Guard
Power Switch
Transport
Wheel

10
ASSEMBLY
INSTALLATION PREPARATION
•For safety operation, please select a safe, dry, solid and spacious horizontal
surface for installation;
•After receiving the product, remove all parts from the product package. Please
carefully check whether the parts and tools are complete according to the
packing list.
INSTALLATION INSTRUCTIONS
•Before installation, please read and understand the important safety steps in the
manual carefully.
•Before each installation step, collect the corresponding parts and tools needed;
•Please use the wrench in the tool kit. If there are no special instructions, tighten
the bolt and nut to the right (clockwise) and loosen the bolt and nut to the left
(counter clockwise).
•When two parts need to be connected, lift the product gently to align with the
hole, so that the knob can easily be inserted in the hole.
•Some parts of the product are heavy. Please ensure that two people participate
in the assembly, and do not lift heavy parts alone to avoid product or personal
damage.
INSTALLATION STEPS
1. a. Lift the upright column to the fixed position (Fig 1);
b. Press the armrests as illustrated (Fig. 2)
c. Lift the console to the position (Fig. 3)

11
2. Hold the product upright columns, insert hexagon knob A and turn them clockwise to
tightly fix the upright columns to the base;
3. Repeat the above steps to tightly fix the armrest to the upright column with hexagon
knob B.

12
4. Attach the safety key to the yellow mark on the console.
5. Please make sure that all parts have been fixed and installed in the correct position.
NOTE:
1. To prevent injury during assembly, please wear gloves and make sure there are two
people assembling the product.
2. During product assembly, please pay attention to safety and avoid injury by moving
parts.
3. To avoid injury, please keep away from bystanders and children during product
assembly.
4. Do not use the product until it is completely assembled and checked.

13
OPERATION
POWER ON
Plug in, turn on the power switch, you will hear a "beep" sound, and the treadmill will be
standby.
SAFETY KEY
•The treadmill will only work if the safety lock is properly placed on the console
slot. Make sure the Safety Key clip on the clothes when exercising in case of an
accident.
•In any situation, pulling off the Safety Key, the treadmill will stop in an
emergency, the "SPEED" window displays "E07", at this time, you may not
perform any other operation on the treadmill except shutting it down.
After the Safety Key is attached correctly again, the treadmill will enter the standby
mode.
FOLDING STEPS
When the treadmill is not in use, it can be folded up to save space.
1. Before folding, please turn off the power switch and unplug the power plug;

14
2. Unscrew the hexagon knob A&B counter clockwise and remove them, then fold the
column and the console.

15
MAINTENANCE
GENERAL CLEANING
Proper maintenance is helpful to prolong the service life of the treadmill.
1. Please place the treadmill in a dry and shady environment. Do not place the treadmill
outdoors in direct sunlight.
2. Check and lock all parts of the treadmill regularly, and replace defective parts in time.
3. Do not use the treadmill by force when it is damaged, so as to avoid product and
personal damage.
TREADMILL ADJUSTMENT
The treadmill Tread-belt is adjusted before leaving the factory, but after use, it will be
stretched or have deviated from the centre position. Please adjust it in time to avoid
damage to the treadmill.
Adjust the tightness of the Tread-belt
If you are using the treadmill, and the Tread-belt slips or does not run smoothly, you can
adjust the tightness of the Tread-belt to improve it.
1. Insert the Allen key in the adjustment screw socket on the left side of the Tread-belt,
and turn the wrench clockwise to tighten the Tread-belt;
2. Repeat step 1 to adjust the right screw. Be sure in adjusting the screw to rotate the
same distance;
3. Repeat steps 1 and 2 until the Tread-belt doesn't slip;
4. If you need to loosen the Tread-belt, please turn the key counter clockwise, and note
that the left and right sides should rotate the same distance.
NOTE:
The Tread-belt should not be adjusted too tightly, otherwise it will damage the Tread
belt, increase the pressure of the front/rear rotary drum, damage the drum bearing,
produce noise and other problems.
Adjustment of Tread-belt position
When using the treadmill, because of the possible force difference exerted by both feet
and the unbalanced pressure exerted on the tread-belt, the tread-belt may deviate from
the center, but this deviation phenomenon is normal. Leave the treadmill running
unloaded for a period of time and the tread-belt will automatically return to the center.
If it doesn't work, you need to adjust it manually.

16
1. Run the treadmill without load and adjust the speed to 0.6~0.9;
2. Observe the distance from the Tread-belt to the left and right sidebars:
•If it deviates to the left, use the Allen key to turn the left screw clockwise;
•If it deviates to the right, use the Allen key to turn the right screw
clockwise;
•If the Tread-belt is still not in the middle, repeat the above action until it is
adjusted to the middle;
NOTE:
Do not over-tighten the rotary drum as this will cause permanent damage to the
bearing.
LUBRICATING THE TREADMILL
When the treadmill leaves the factory, lubricant is added, but necessary inspection is
helpful to keep the treadmill in the best condition for use.
Inspection steps
1. Pull up the side Tread-belt and reach out to touch the surface of the running deck as
far as possible;
2. If you feel there is silicone oil, you don't need to add lubricant for the time being;
3. If you touch the surface and it feels very dry, you need to add 10ml Silicone oil.
Tighten
Tighten
5mm L-type
Inner Allen Key

17
Lubrication cycle
Time
Operation
First use
Check the lubrication, and add according
to the situation
30 days or 30 hours of use
Check the lubrication, and add as needed
1 year or 100 hours of use
Add 10ml Silicone oil
NOTE:
Please use silicone oil not made of petroleum.
Adding steps
1. Cut a small opening in the oil bottle to ensure that it can be poured out, but not in a
great amount;
2. Pull up the side Tread-belt so that you can place the oil bottle to the bottom of the
running belt and inject oil into the middle of the running board. Put down the running
belt;
3. Turn the treadmill on without loading for about one minute, so that the newly added
Silicone oil can be automatically and evenly applied before use.
PRODUCT CLEANING:
1. After using the product each time, please wipe the stains off the Console and other
parts with a clean cloth;
2. If the product is used frequently, it can be wiped with a mild detergent.
Lubricating Oil

18
NOTE:
1. When cleaning the treadmill, the power switch should be turned off and the power
cord should be removed from the socket.
2. Please do not use corrosive detergent to wipe.
PRODUCT STORAGE:
1. Please put the treadmill in a clean and dry environment.
2. When the treadmill is not in use, it can be folded to save space.
3. When the treadmill is not in use, please turn off the power switch and unplug the
power plug.
CONSOLE
START / STOP
Start: In standby mode, Attach the Safety Key correctly, press the "START" key, and the
treadmill will start running after a 3 second countdown;
Stop: When exercising, press the STOP key or directly disconnect the Safety Key to stop
running.

19
KEY FUNCTION
START
Press this key, and the treadmill will start running from the lowest speed
or the programmed default speed after a 3 second shutdown.
STOP
In running mode, press this key and the treadmill will stop running.
MODE
In standby mode, press this key to enter the countdown mode setting,
and the selection order is: TIME-DIS.-CAL.- Manual mode.
PROG.
Program selection: P1 ~ P12 - Manual mode.
-
1. When the treadmill is running, press this key to decrease the speed.
2. It can be used to set time, distance, and calories values.
+
1. When the treadmill is running, press this key to increase the speed.
2. It can be used to set time, distance, and calories values.
DISPLAY
Name
Function
SPEED
1. Displays the countdowns of "3" - "2" - "1" in turn during startup;
2. Displays the exercising speed when exercising;
3. Displays "E07" when the Safety Key is disconnected;
4. The lower left corner displays the program number when a built-in
program is selected.
TIME
1. Displays the exercising time when exercising;
2. When adjusting the value in the countdown mode, it displays the set
time value.
DIS.
1. Displays the exercising distance when exercising;
2. When adjusting the value in the countdown mode, it displays the set
distance value.
CAL.
1. Displays the value of calories consumed when exercising;
2. When adjusting the value in the countdown mode, it displays the set
calorie value.
MODE

20
Manual Mode
1. In standby mode, press the "START" key directly, and the treadmill starts from the
lowest speed after a 3 second countdown;
2. Press " + / -" to adjust the speed value;
3. Press the "STOP" key to slow down the treadmill to a stop.
Countdown mode
In this mode, the user can set the value of time, distance, and calories according to the
demand. After setting, press the "START" key, the treadmill will enter the countdown
mode. Once the set value drops to "0", the treadmill will slow down and stop
automatically.
1. In standby mode, press the "MODE" key to enter the countdown mode;
2. Press the "MODE" key to cycle switch: "TIME" - "DIS." - "CAL." –Manual mode.
3. Press the "+ / -" key to add and decrease the value of the current window;
4. Press the "START" key, and the treadmill starts from the lowest speed after a 3
second countdown. At this time, just like in manual mode, the speed and slope can be
adjusted through the keys on the panel;
5. When the value set by countdown mode on the window drops to "0", the treadmill will
slow down and stop automatically. While exercising, you can also press the "STOP" key
or disconnect the Safety Key to stop.
Built-in program
In addition to the manual mode, there are 12 different programs built into the treadmill.
Each program is divided into 10 segments, and the running time of each segment is set
time / 10. (Please refer to Appendix 1 for the program table)
1. In standby mode, press the "PROG." key to select any built-in program from P1 to P12.
At this time, the "TIME" window displays the default value and flashes, so press the "+ / -
" key to adjust the required exercising time;
2. Press the "START" key, and after a 3 second countdown, the treadmill will start to run
at the speed of the first segment of the selected program. When this segment of the
program is finished, the treadmill will automatically enter the next segment of the
program and adjust the corresponding parameters synchronously;
3. While running, you can press the "+/-" key to adjust the speed, but when you enter the
next segment of the program, the treadmill will automatically adjust to the default value
of the corresponding segment;