UREVO URTM006 User manual
IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future
reference.
The specications of this product may vary from this photo, subject to change without notice.
USER MANUAL
COMPACT TREADMILL
FITNESS.MADE EASY FOR EVERYONE
URTM006
MADE IN CHINA
Manufacturer:Shanghai Runmi Technology Co., Ltd.
Address:15th Floor, Building 21B, No.1158, Zhongxin Rd, Songjiang
district, Shanghai, P.R.China
Model: URTM006 V4.0
0302
EN EN
SERVICE
IMPORTANT: FOR UREVO ONLY
For damaged or defective products, questions, replacement parts or any other service
support, please contact our customer service department as follows:
Services@urevosports.com
Response Time: 24-48 hours
Emailing us with the Order ID will be the best method to receive a response during peak
business hours.
Website: www.urevosports.com
PLEASE DO NOT RETURN THIS PRODUCT WITHOUT ASKING OUR
CUSTOMER SERVICE.
IMPORTANT SAFETY GUIDELINES
Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately after using and before
cleaning.
WARNING - To reduce the risk of burns, re, electric shock, or injury to persons:
1. An appliance should never be left unattended plugged in. Unplug from outlet when not in use,
and before putting on or taking o parts.
2. Do not operate under blanket or pillow. Excessive heating can occur and cause re, electric
shock, or injury to persons.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids,
or disabled persons.
4. Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water. Return the appliance to a service
center for examination and repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint,
hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
12. Caution - To reduce the risk of injury from moving parts - Unplug before servicing.
13. Warning - To reduce the risk of Electric shock - Unplug before cleaning or servicing.
14. Warning - Risk of personal injury - Keep children under the age of 13 away from machine.
15. To disconnect, turn all controls to the position, then remove plug form outlet.
16. Connect this appliance to a properly outlet only. See grounding instructions.
17. This appliance is not intended for use by persons with reduces physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Keep
children under the age of 13 away from this machine.
18. The maximum weight capacity for this product is 265 lbs / 120 kg. DO NOT EXCEED
MAXIMUM WEIGHT CAPACITY.
SAVE THESE INSTRUCTIONS
Scan this QR code to get the product installation guide
YouTube Video
0504
EN EN
POWER SUPPLY PRECAUTIONS
1. Use US: 120V~ 60Hz/EU: 220-240V~ 50-60Hz power supply.
2. The power plug must be reliably grounded, and the socket must be equipped with
a dedicated circuit to avoid sharing a circuit with other electrical equipment.
3. Directly plug the power cord rmly into the socket.
4. Use a qualied socket to avoid dangers arising therefrom. If the plug does not
match the socket, do not use the plug and ask an electrician to handle it.
5. Do not let the power cord contact the rollers. Do not put the power supply on the
running belt. Do not use any damaged plugs.
6. Do not pull out or insert the power plug with wet hands.
7. Pull out the plug from the socket before cleaning and maintenance.
8. Check whether the treadmill functions normally before use. If normal, you can use it,
otherwise do not use it and contact our Customer Service Department in time.
9. Clip the safety lock wire to your clothes before exercise for emergency stop.
10. Ensure that there is a 2000*1000mm vacant safe area without obstacles behind
the treadmill during exercise.
11. In case of an abnormality, pull up with the handrail to keep your feet o the running
belt and jump out of the treadmill.
12. If you feel dizzy, chest pain, nausea, or breathless during exercise, stop exercising
immediately and consult a tness coach or doctor.
13. Do not use this product outdoors, under high humidity or sunlight.
14. Power o and unplug when you leave.
PRECAUTIONS FOR INSTALLATION
1. Read the instructions carefully before installation.
2. Take out all parts from the package and separately place them on the clean ground
for your overall check and easy installation.
3. Check whether all parts are complete according to the packing list.
4. Be careful when using tools or handling. Do not install the product by force
according to your preference.
5. Check whether tools and packaging materials left behind are dangerous. Plastic
and foam are harmful to children.
6. Install the product properly after carefully reading the steps and instructions in the
manual.
7. This product must be properly installed by an adult. If necessary, ask a professional
to install it.
Install the product properly and do not damage it.
IMPORTANT:
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
The specications of this product may vary from this photo, subject to change without
notice.
GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric and
a grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in
a risk of electric shock. Check with a qualied electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug provided
with the product - if it will not t the outlet, have a proper outlet installed by a qualied
electrician.
For EU safety instructions:
1.If the supply cord is damaged, it must be replaced by a special cord set available
from the manufacturer or its service agent.
2.The free area shall not be less than 0.6 metres greater than the training area in the
directions from which the equipment is accessed.
3.If any of the adjustment devices are left projecting, they could interfere with the
user’s movement .
4.Warning, that a folded treadmill should not be operated.
5.Warning, to allowing the running surface to come to a complete stop before folding.
6.Noise emission under load is higher than without load.
7.On airborne noise: ≤65dB.
8.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
9.If the heart rate is displayed:
WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may
result in serious injury or death. If you feel faint stop exercising immediately.
10. If equipped with a pull-cord safety stop:
An instruction on how to use, attach and test the pull-cord safety stop is required.
0706
EN EN
PRODUCT OVERVIEW
Display Screen
Safety Key
Console
Upright Column
Armrest
Decorative Cover
Sidebar
Tread-Belt
Left Rear
Corner Guard
Right Rear
Corner Guard
Power Switch
Transport Wheel
PACKING LIST
PRODUCT ACCESSORIES
TOOL PACK
Multi-functional
Open-ended Wrench × 1
Safety Key × 1
6mm L-type Inner
Allen key × 1
Hexagon Knob B
( 38mm ) x 2
Hexagon Knob A
( 58mm ) x 2
User Manual
5mm L-type Inner
Allen key × 1
Lubricating Oil × 1
Treadmill
0908
EN EN
3
2.Hold the product upright columns, insert hexagon knob A and turn them clockwise to
tightly x the upright columns to the base;
A
3.Repeat the above steps to tightly x the armrest to the upright column with hexagon
knob B.
B
ASSEMBLY
INSTALLATION PREPARATION
• For safety operation, please select a safe, dry, solid and spacious horizontal surface
for installation;
• After receiving the product, remove all parts from the product package. Please
carefully check whether the parts and tools are complete according to the packing
list.
INSTALLATION INSTRUCTIONS
• Before installation, please read and understand the important safety steps in the
manual carefully.
• Before each installation step, collect the corresponding parts and tools needed;
• Please use the wrench in the tool kit. If there are no special instructions, tighten
the bolt and nut to the right (clockwise) and loosen the bolt and nut to the left
(counterclockwise).
• When two parts need to be connected, lift the product gently to align with the hole,
so that the knob can easily be inserted in the hole.
• Some parts of the product are heavy. Please ensure that two people participate in the
assembly, and do not lift heavy parts alone to avoid product or personal damage.
INSTALLATION STEPS
1.a. Lift the upright column to the xed position (Fig 1);
b. Press the armrests as illustrated (Fig. 2)
c. Lift the console to the position (Fig. 3)
1
2
1110
EN EN
OPERATION
POWER ON
Plug in, turn on the power switch, you will hear a "beep" sound, and the treadmill will
be standby.
SAFETY KEY
• The treadmill will only work if the safety lock is properly placed on the console slot.
Make sure the Safety Key clip on the clothes when exercising in case of an accident.
• In any situation, pulling off the Safety Key, the treadmill will stop in an emergency,
the "SPEED" window displays "E07", at this time, you may not perform any other
operation on the treadmill except shutting it down.
After the Safety Key is attached correctly again, the treadmill will enter the standby
mode.
FOLDING STEPS
When the treadmill is not in use, it can be folded up to save space.
1.Before folding, please turn o the power switch and unplug the power plug;
4.Attach the safety key to the yellow mark on the console.
5.Please make sure that all parts have been xed and installed in the correct position.
NOTE:
1.To prevent injury during assembly, please wear gloves and make sure there are two
people assembling the product.
2.During product assembly, please pay attention to safety and avoid injury by moving
parts.
3.To avoid injury, please keep away from bystanders and children during product
assembly.
4.Do not use the product until it is completely assembled and checked.
1312
EN EN
MAINTENANCE
GENERAL CLEANING
Proper maintenance is helpful to prolong the service life of the treadmill.
1.Please place the treadmill in a dry and shady environment. Do not place the treadmill
outdoors in direct sunlight.
2.Check and lock all parts of the treadmill regularly, and replace defective parts in time.
3.Do not use the treadmill by force when it is damaged, so as to avoid product and
personal damage.
TREADMILL ADJUSTMENT
The treadmill Tread-belt is adjusted before leaving the factory, but after use, it will be
stretched or have deviated from the center position. Please adjust it in time to avoid
damage to the treadmill.
Adjust the tightness of the Tread-belt
If you are using the treadmill, and the Tread-belt slips or does not run smoothly, you
can adjust the tightness of the Tread-belt to improve it.
1.Insert the Allen key in the adjustment screw socket on the left side of the Tread-belt,
and turn the wrench clockwise to tighten the Tread-belt;
2.Repeat step 1 to adjust the right screw. Be sure in adjusting the screw to rotate the
same distance;
3.Repeat steps 1 and 2 until the Tread-belt doesn't slip;
4.If you need to loosen the Tread-belt, please turn the key counterclockwise, and note
that the left and right sides should rotate the same distance.
NOTE:
The Tread-belt should not be adjusted too tightly, otherwise it will damage the Tread-
belt, increase the pressure of the front/rear rotary drum, damage the drum bearing,
produce noise and other problems.
Adjustment of Tread-belt position
When using the treadmill, because of the possible force dierence exerted by both
feet and the unbalanced pressure exerted on the tread-belt, the tread-belt may deviate
from the center, but this deviation phenomenon is normal. Leave the treadmill running
unloaded for a period of time and the tread-belt will automatically return to the center.
If it doesn't work, you need to adjust it manually.
1.Run the treadmill without load and adjust the speed to 0.6~0.9;
2.Observe the distance from the Tread-belt to the left and right sidebars:
• If it deviates to the left, use the Allen key to turn the left screw clockwise;
• If it deviates to the right, use the Allen key to turn the right screw clockwise;
• If the Tread-belt is still not in the middle, repeat the above action until it is adjusted to
the middle;
2.Unscrew the hexagon knob A&B counterclockwise and remove them, then fold the
column and the console.
1
2
3
A
B
1514
EN EN
Lubricating Oil
3.Turn the treadmill on without loading for about one minute, so that the newly added
Silicone oil can be automatically and evenly applied before use.
PRODUCT CLEANING:
1.After using the product each time, please wipe the stains o the Console and other
parts with a clean cloth;
2.If the product is used frequently, it can be wiped with a mild detergent.
NOTE:
1.When cleaning the treadmill, the power switch should be turned o and the power
cord should be removed from the socket.
2.Please do not use corrosive detergent to wipe.
PRODUCT STORAGE:
1.Please put the treadmill in a clean and dry environment.
2.When the treadmill is not in use, it can be folded to save space.
3.When the treadmill is not in use, please turn o the power switch and unplug the
power plug.
NOTE:
Do not over-tighten the rotary drum as this will cause permanent damage to the bearing.
Tighten
Tighten
5mm L-type
Inner Allen Key
LUBRICATING THE TREADMILL
When the treadmill leaves the factory, lubricant is added, but necessary inspection is
helpful to keep the treadmill in the best condition for use.
Inspection steps
1.Pull up the side Tread-belt and reach out to touch the surface of the running deck as
far as possible;
2.If you feel there is silicone oil, you don't need to add lubricant for the time being;
3.If you touch the surface and it feels very dry, you need to add 10ml Silicone oil.
Lubrication cycle
Time Operation
First use
Check the lubrication, and add according to the situation
30 days or 30 hours of use Check the lubrication, and add as needed
1 year or 100 hours of use Add 10ml Silicone oil
NOTE:
Please use silicone oil not made of petroleum.
Adding steps
1.Cut a small opening in the oil bottle to ensure that it can be poured out, but not in a
great amount;
2.Pull up the side Tread-belt so that you can place the oil bottle to the bottom of the
running belt and inject oil into the middle of the running board. Put down the running
belt;
1716
EN EN
WINDOW
Name Function
SPEED
1.Displays the countdowns of "3" - "2" - "1" in turn during startup;
2.Displays the exercising speed when exercising;
3.Displays "E07" when the Safety Key is disconnected;
4.The lower left corner displays the program number when a built-in
program is selected.
TIME
1.Displays the exercising time when exercising;
2.When adjusting the value in the countdown mode, it displays the set
time value.
DIS.
1.Displays the exercising distance when exercising;
2.When adjusting the value in the countdown mode, it displays the set
distance value.
CAL.
1.Displays the value of calories consumed when exercising;
2.When adjusting the value in the countdown mode, it displays the set
calorie value.
CONSOLE
START / STOP
Start:
Start: In standby mode, Attach the Safety Key correctly, press the "START" key, and the
treadmill will start running after a 3 second countdown;
Stop:
when exercising, press the STOP key or directly disconnect the Safety Key to stop
running.
KEY FUNCTION
START Press this key, and the treadmill will start running from the lowest speed
or the programmed default speed after a 3second countdown.
STOP In running mode, press this key and the treadmill will stop running.
MODE In standby mode, press this key to enter the countdown mode setting,
and the selection order is: TIME-DIS.-CAL.- Manual mode.
PROG. Program selection: P1 ~ P12 - Manual mode.
-1. When the treadmill is running, press this key to decrease the speed.
2. It can be used to set time, distance, and calories values.
+1. When the treadmill is running, press this key to increase the speed.
2. It can be used to set time, distance, and calories values.
1918
EN EN
SLEEP FUNCTION
When the treadmill stops running and there is no operation for more than 10 minutes,
the system will automatically turn o all displays and enter the sleep mode. Pressing
any key will wake it up.
PARAMETER DISPLAY AND SETTING RANGE:
Display range Mode default
value
Program default
value Setting range
Speed US: 0.6~6.2(MPH)
EU: 1~10(KPH) ------ -------- US:0.6~6.2(MPH)
EU:1~10(KPH)
Time 0:00~99.59 30:00 30:00 5:00~99:00
Distance US: 0~99.9MI
EU: 0~99.9KM 1.0 -------- US: 1~99MI
EU: 1~99KM
Calories 0~999 50 -------- 10~999
MODE
Manual Mode
1.In standby mode, press the "START" key directly, and the treadmill starts from the
lowest speed after a 3 second countdown;
2.Press " + / -" to adjust the speed value;
3.Press the "STOP" key to slow down the treadmill to a stop.
Countdown mode
In this mode, the user can set the value of time, distance, and calories according to the
demand. After setting, press the "START" key, the treadmill will enter the countdown
mode. Once the set value drops to "0", the treadmill will slow down and stop
automatically.
1.In standby mode, press the "MODE" key to enter the countdown mode;
2.Press the "MODE" key to cycle switch: "TIME" - "DIS." - "CAL." – Manual mode.
3.Press the "+ / -" key to add and decrease the value of the current window;
4.Press the "START" key, and the treadmill starts from the lowest speed after a 3
second countdown. At this time, just like in manual mode, the speed and slope can
be adjusted through the keys on the panel;
5.When the value set by countdown mode on the window drops to "0", the treadmill
will slow down and stop automatically. While exercising, you can also press the
"STOP" key or disconnect the Safety Key to stop.
Built-in program
In addition to the manual mode, there are 12 dierent programs built into the treadmill.
Each program is divided into 10 segments, and the running time of each segment is set
time / 10. (Please refer to Appendix 1 for the program table)
1.In standby mode, press the "PROG." key to select any built-in program from P1 to
P12. At this time, the "TIME" window displays the default value and ashes, so press
the "+ / -" key to adjust the required exercising time;
2.Press the "START" key, and after a 3 second countdown, the treadmill will start to
run at the speed of the rst segment of the selected program. When this segment of
the program is nished, the treadmill will automatically enter the next segment of the
program and adjust the corresponding parameters synchronously;
3.While running, you can press the "+/-" key to adjust the speed, but when you enter
the next segment of the program, the treadmill will automatically adjust to the default
value of the corresponding segment;
4.When all segments of the program are nished and the program is nished, the
treadmill will slow down and stop automatically. While exercising, you can also press
the "STOP" key or disconnect the Safety Key to stop running.
2120
EN EN
TROUBLESHOOTING
Failures and solutions
This product is reliably designed and easy to use. In case of a problem, carefully read
the solutions to the failures as described below.
Failure: No information is displayed on the screen.
Solution: Check whether the power cord is plugged in properly, whether the plug is
loose, and whether the power switch is turned on.
Failure: Power outage during use.
Solution: Check whether the power cord is connected firmly and whether the
overcurrent protector is disconnected.
Failure: Running belt is not centered.
Solution: Check whether the treadmill is placed on flat ground and whether the running
belt is adjusted properly. Refer to the adjustment of running belt.
If the problem in your treadmill is not included in the above, and you are not sure how
to solve it, please contact us(Email: Services@urevosports.com) timely and do not
handle it by yourself.
ERROR CODE
Common failures of control system and troubleshooting.
The following present error codes displayed on the electronic display and their solutions:
ERROR CODE FAULT ANALYSIS HANDLING METHOD AND SEQUENCE
E0 Safety lock falls o
1.Check whether the safety lock
magnet has magnetic force.
2.Check whether the socket of the
magnetic ring tube of the display
board is loose.
3.Check whether the controller’s
communication line and the display
board communication line are loose.
4.Replace the upper controller.
E2 Lower controller’s power tube
is damaged Replace the host controller.
E4 Shield wire failure
1.First replace the 5P communication
line of the display board.
2.Replace the host controller.
E5
Power tube breakdown
short-circuit protection (Anti-
explosion protection)
1.Rule out the cases of overweight,
shortage of oil on the running belt or
running board.
2.Excessive torque setting.
3.Replace the motor or host controller.
E6 Main motor abnormality
protection
1.Check whether the motor wire is
connected.
2.Replace the motor.
3.Replace the host controller.
E7 Communication error
1.Replace the 5P communication line
of the display board.
2.Replace the display motherboard.
3.Replace the host controller.
E8 Overload protection
1.Rule out the cases of overweight,
shortage of oil on the running belt or
running board.
2.Replace the running belt or running
board.
3.Replace the motor.
4.Replace the host controller.
22
EN
WARRANTY
MANUFACTURER’S LIMITED WARRANTY
UREVO warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the premise that
it has been installed and operated in accordance with UREVO User Manual. UREVO’s
obligation under this warranty applies to the following:
COMPONENT LENGTH OF WARRANTY
Structural Frame 1 year For Home Use Only
All Other Components 90 days For Home Use Only
EXCLUSIONS FROM WARRANTY COVERAGE:
UREVO does not warrant against and is not responsible for, and no implied warranty
shall be deemed to cover, any product failure, product malfunction, or damages
attributable to:
1.Improper installation and/or failure to abide by UREVO’s installation guidelines;
2.Use of this product beyond normal home use, or in an application for which it was
not designed;
3.Cosmetic items such as scratches, dents or discolorations;
4.Damage caused by normal wear and tear, vandalism, accidents or by animals;
5.Any act of Nature (such as re, ooding, snow, ice, hurricanes, earthquakes,
lightning s or other natural disasters), environmental conditions (such as air
pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt,
grease, oil, etc.);
6.Normal weathering due to exposure to sunlight, weather and atmosphere which
can cause colored surfaces to among other things, ake, chalk, accumulate dirt or
stains.
7.Improper operation, alteration, handling, storage, abuse or neglect of the products.
UREVO , using its sole discretion, will either repair or replace free of charge any part(s)
proven to be defective under normal home use. Any repair or replacement shall provide
no new warranty coverage, but shall retain only the remaining portion of the original
product’s warranty. This warranty is oered only to the original purchaser and is not
transferable. Proof of original purchase is required.
When ordering replacement parts please have the following information ready:
1. Order Number
2. Description of Parts(Adding photos or videos would be helpful)
3. Part Number
4. Date of Purchase
INHALTSVERZEICHNIS
24 WICHTIGE SICHERHEITSHINWEISE
25 VORSICHTSMASSNAHMEN ZUR STROMVERSORGUNG
26 VORSICHTSMASSNAHMEN BEIM ZUSAMMENBAU
27 PACKLISTE
28 PRODUKTÜBERSICHT
29 MONTAGE
32 BETRIEB
34 WARTUNG
37 KONSOLE
42 FEHLERSUCHE
42 GARANTIE
Other manuals for URTM006
2
Table of contents
Other UREVO Treadmill manuals
