Ursalink UR75 Edge User manual

1
UR72 & UR75
Industrial Cellular Router
Quick Start Guide
Ursalink Technology Co., Ltd.

www.ursalink.com
1
Welcome
Thank you for choosing Ursalink UR72/UR75 industrial cellular router.
This guide describes how to install the UR72/UR75 and how to log in the Web GUI to configure the device.
Once you complete the installation, refer to the Ursalink UR72/UR75 User Guide for instructions on how to
perform configurations on the device.
Related Documents
This Start Guide only explains the installation of Ursalink UR72 & UR75 router. For more functionality and
advanced settings, please refer to the relevant documents as below.
Document
Description
Ursalink UR72/UR75 Datasheet
Datasheet for the Ursalink UR72/UR75 industrial cellular router.
Ursalink UR72/UR75 User Guide
Users could refer to the guide for instruction on how to log in the
web GUI, and how to configure all the settings.
The related documents are available on Ursalink website: http://www.ursalink.com.
Declaration of Conformity
UR72 & UR75 are in conformity with the essential requirements and other relevant provisions of the CE, FCC,
and RoHS.
For assistance, please contact
Ursalink technical support:
Email: [e-mail]
Tel: [phone]
Fax: [phone]

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
2
Before you begin to install the UR72/UR75 router, please check the package contents to verify that you have
received the items below.
1.1 Package Contents
1 × UR75 Router or
1 × UR72 Router
1 × Ethernet Cable
1 × Power Adapter
1 × Warranty Card
1 × Quick Start Guide
2 × Magnetic Mount
Cellular Antennas (Default)
2 × Stubby Cellular
Antennas (Optional)
2 × Stubby Wi-Fi
Antennas (Optional)
2 × Rack Mount Kits
(Optional)
1 × Wall Mounting Bracket
(Optional)
If any of the above items is missing or damaged, please contact your Ursalink sales
representative.
2 × SIM Card Slots
1 × DIN Rail Kit (Default)
1 × 2-Pin Pluggable
Terminal
1 × 10-Pin Pluggable
Terminal
1. Packing List

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
3
2.1 Overview
A. Front Panel
UR72 Front Panel
1Main Cellular Antenna
2Reset Button
3LED Indicator Area
POWER: Power Indicator
STATUS: Status Indicator
WLAN: Wi-Fi Indicator
VPN: VPN Indicator
SIM1: SIM1 Status Indicator
SIM2: SIM2 Status Indicator
: Signal Strength Indicator
4Ethernet Port Indicator:
Orange for data transmission;
Green for network rate
5AUX Cellular Antenna
6WLAN2: Wi-Fi Antenna 2
7Serial Port & I/O
8WLAN1: Wi-Fi Antenna 1
UR75 Front Panel
1Main Cellular Antenna
2Reset Button
3LED Indicator Area
POWER: Power Indicator
STATUS: Status Indicator
WLAN: Wi-Fi Indicator
VPN: VPN Indicator
SIM1: SIM1 Status Indicator
SIM2: SIM2 Status Indicator
: Signal Strength Indicator
4Ethernet Port Indicator
Orange for data transmission;
Green for network rate
5AUX Cellular Antenna
6WLAN2: Wi-Fi Antenna 2
7Serial Port & I/O
8WLAN1: Wi-Fi Antenna 1
2. Hardware Introduction

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
4
B. Left Side Panel
1SIM Card Slot
2Power Connector
3Grounding Stud
2.2 Dimensions (mm)
2.3 Pinouts
PIN
RS232
RS485
DI
DO
Description
1
TXD
---
---
---
Transmit Data
2
RXD
---
---
---
Receive Data
3
---
A
---
---
Data +
4
---
B
---
---
Data -
5
GND
---
GND
---
Ground
6
---
---
IN1
---
Digital Input1
7
---
---
IN2
---
Digital Input2
8
---
---
---
OUT1
Digital Output1
9
---
---
---
OUT2
Digital Output2
10
---
---
---
COM
Common
Ground

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
5
2.4 LED Indicators
LED
Indication
Status
Description
POWER
Power Status
On
The power is switched on
Off
The power is switched off
STATUS
System Status
Green Light
Static: Start-up
Blinking slowly: the system is running properly
Red Light
The system goes wrong
VPN
VPN Status
Green Light
VPN is connected
Off
VPN is disconnected
WLAN (Wi-Fi)
WLAN Status
Green Light
Static: Wi-Fi is enabled
Blinking slowly: sending or receiving data via
Wi-Fi
Off
Wi-Fi is disabled
SIM1/SIM2
SIM Card Status
Off
SIM1 or SIM2 is registering or fails to register (or
there are no SIM cards inserted)
Green Light
Blinking slowly: SIM1 or SIM2 has been registered
and is ready for dial-up
Blinking rapidly: SIM1 or SIM2 has been
registered and is dialing up now
Static: SIM1 or SIM2 has been registered and
dialed up successfully
Signal Strength
Signal 1/2/3
Off
No signal
Green Light
Static/Off/Off: weak signals with 1-10 ASU (please
check if the antenna is installed correctly, or
move the antenna to a suitable location to get
better signal)
Static/Static/Off: normal signals with 11-20 ASU
(average signal strength)
Static/Static/Static: strong signals with 21-31 ASU
(signal is good)
PIN
Description
11
Positive
12
Negative

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
6
2.5 Reset Button
Function
Description
STATUS LED
Action
Reboot
Blinking
Press and hold the reset button for about 5-15 seconds.
Static Green
Release the button and wait for system to reboot.
Reset
Blinking
Press and hold the reset button for more than 15 seconds.
Static Green →
Rapidly Blinking
Release the button and wait.
Off → Blinking
The router is now reset to factory defaults.
2.6 Ethernet Port Indicator
Indicator
Status
Description
Link Indicator (Orange)
On
Connected
Blinking
Transmitting data
Off
Disconnected
Rate
Indicator (Green)
On
1000 Mbps mode
Off
100 Mbps mode

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
7
Environmental Requirements
- Power Input: 9-48 VDC
- Power Consumption: Typical 2.9W (Max 4.5 W) for UR72
Typical 2.8 W (Max 5.5 W) for UR75
- Operating Temperature: -20°C to 70°C (4°F -158°F)
- Relative Humidity: 0% to 95% (non-condensing) at 25°C/77°F
3.1 SIM Card/Micro SD Card/SSD Installation
3.1.1 SIM Card Installation
A. Push the yellow button on the left panel of the B. Put SIM card onto the slot then insert the
slot router, and then you will see the SIM card back into the hole.
slot popping out directly.
3.1.2 Micro SD Card Installation
A. Unscrew the cover on the left panel B. Insert Micro SD card.
of the router and then take it off.
3. Hardware Installation

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
8
C. Close the cover and screw it back to the router.
3.1.3 SSD Installation
Before installing SSD, please turn off the power.
A. Unscrew the enclosure, and then remove the cover.
B. Unscrew the main-board, find the interface on the rear side of the main-board and then insert SSD.

Ursalink UR72 & UR75 Quick Start Guide
www.ursalink.com
9
C. Screw the main-board on the cabinet and close the cover.
3.2 Rotate the Antenna into the Antenna Connector
The external antenna should be installed vertically always on a site with a good cellular signal.
3.3 Connect the Router to a Computer.
Please connect PC to any port among GE 1/1-GE 1/4 of UR75 router, or to GE 1 of UR72 router directly.
3.4 Mount the Router
The router can be placed on a desktop or mounted to a wall or a DIN rail.
3.4.1 Wall Mounting (Measured in mm)
Use 2 pcs of M3 × 6 flat head Phillips screws to fix the wall mounting kit to the router, and then use 2 pcs of
M3 drywall screws to mount the router associated with the wall mounting kit on the wall.