usha NUTRIPRESS CPJ 361S User manual

GET MORE JUICE
OUT OF LIFE
COLD PRESS JUICER
CPJ 361S
MORE JUICE MORE NUTRITION MORE TASTE
INSTRUCTION MANUAL
21600581_USHA_Manual.pdf 1 19/04/16 5:15 pm

21600581_USHA_Manual.pdf 2 19/04/16 5:15 pm

1
Congratulations
for joining the next revolution in juicing - cold
press technology for natural juicing
We welcome you to usha family as a proud owner
of Usha Nutripress cold press juicer
Usha Nutripress brings to you the revolutionary
cold press technology with low temperature juicing
and silent operation to extract more juice, more
nutrition and more taste from vegetables & fruits
Understanding your nutritional requirements
towards leading an active lifestyle, Usha
Nutripress can effortlessly & efficiently extract
juices from hard vegetables, green leafy
vegetables, fruits, nuts & grains and frozen
desserts
In order to seamlessly operate your machine and
get best results every time, we urge you to read
this manual carefully and familiarize yourself with
your Usha Nutripress
We look forward to continued association with
you. Should you have any further queries, you can
visit our website – ushacpj.com
Usha Nutripress - get more juice out of life
21600581_USHA_Manual.pdf 3 19/04/16 5:15 pm

21600581_USHA_Manual.pdf 4 19/04/16 5:15 pm

Contents
• Know your juicer :
o Unpacking your USHA NUTRIPRESS Cold Press Juicer box 4
o Package Checklist 5
o Description of Parts 6
o Exploded view of Parts 7
• Caring for you - Important safety instructions
o Save The Instruction 8
o Important Safeguards 8
o Safety Warning 10
o Before first usage 11
• How to Assemble your USHA NUTRIPRESS –
o Step by step process to assemble 12
o Choosing the right location 12
o Matching of assembly indicators (arrows & dots) 14
• How to Operate your USHA NUTRIPRESS
o Don’ts while juicing & operational warning 18
• Using your USHA NUTRIPRESS to make different types of juices
• Disassembling after usage
o Step by Step process to disassemble 23
• Cleaning after disassembling
o Individual cleaning of each part 25
o How to Clean Silicone Parts 25
o Use of cleaning brush 25
• Storage Instructions 28
• Troubleshooting guide 29
• Service just a call or click away 31
• Product Specifications & Technical details 32
• Warranty Card 33
21600581_USHA_Manual.pdf 5 19/04/16 5:15 pm

Section 1
Know your USHA Nutripress
Cold press juicer :
1.a. Unpacking your USHA NUTRIPRESS
Cold Press Juicer box
UNBOXING:
1. Open the cardboard box and remove the top packing.
2. Lift the main unit from the base packing.
3. Remove the juice/pulp container and hopper assembly kept inside the white box.
Warning : Packaging material (e.g. Films, Thermocole) can be dangerous for children.
There is a risk of suffocation! Keep all packaging well away from children.
4
21600581_USHA_Manual.pdf 6 19/04/16 5:15 pm

Your USHA Nutripress CPJ 361S
is delivered with the following
components:
Main unit
Juicing bowl Juice Container Pulp Container Cleaning Brush
Fine filter Coarse filter
Auger Pusher
Hopper
5
21600581_USHA_Manual.pdf 7 19/04/16 5:15 pm

Pusher
1. c. Description of parts
Feeding Tube/Hopper
Control Switch
Auger
Juicing Chamber
Smart Cap
Main Unit
Pulp Outlet
Juice Outlet
Pulp Container Juice Container
6
Note: The product illustrated/photographed in this booklet may vary from the actual product.
21600581_USHA_Manual.pdf 8 19/04/16 5:15 pm

1.d. Exploded view of parts
Feeding Tube/Hopper
Control Switch
Smart Cap
Main Unit
Top-set Assembly
• Align the black arrows on each
part and assemble in the order
shown.
• Once assembled, turn the hopper
clockwise to close.
Top-set and main unit Assembly
• Place the hopper on the juicing bowl.
• Align the arrow on the hopper with the
unlock indicator on the main unit
to join the two assemblies.
7
21600581_USHA_Manual.pdf 9 19/04/16 5:15 pm

Section 2
Caring for you:-
2.a. SAVE THESE INSTRUCTIONS
This appliance is for household use only.
(The appliance cannot be covered under warranty if the product is used in a way not intended by the
manufacturer or is used commercially.)
All details with regard to the installation, operation and care are compiled to the best of our knowledge.
No claims can be derived from the information provided, the illustrations or descriptions in this manual.
• Save the instruction manual for future reference.
• If the appliance is given as a gift, please include the manual with the product.
The safety instructions mentioned below will tell you how to use your cold press juicer without harming
yourself and damaging your juicer.
2.b. IMPORTANT SAFEGUARDS
Before using your Nutripress juicer, please read the basic safety precautions listed below:
1. Read all instructions before using your cold press juicer.
2. To protect against risk of electrical shock do not put the main unit, cord or plug in water or other
liquids and do not wash the unit in the dishwasher.
3. Children should not be allowed to use this product. Keep the product and its cord out of reach of
children.
4. Do not leave the juicer unsupervised while it is operating.
5. Unplug the power cord from outlet when - not in use, before putting on or taking off parts and
before cleaning.
6. Avoid contact with moving parts.
7. Do not operate the juicer if the power cord is damaged or if the appliance malfunctions or
damaged in any manner. Please contact the customer care executive for examination and/or
repair.
8. The use of attachments not recommended or sold by the manufacturer may cause fire, electric
shock or injury.
9. Do not use the product outdoors.
10. Do not let the power cord hang over edge of table or counter.
11. Always make sure that the hopper is closed securely before switching on the juicer. Do not open
the hopper while the juicer is in operation.
12. Be sure to switch OFF the appliance after each use. Make sure the motor stops completely before
disassembling.
13. Do not put fingers or other objects inside the feeding tube during operation. If food becomes
lodged, use pusher or another piece of fruit or vegetable to push it down. When this method does
not work, switch off the juicer and disassemble the hopper to remove the remaining food.
14. Do not alter or modify the appliance in anyway.
15. Do not open the housing on the product under any circumstances. There is a danger of an
electrical shock. In addition, it may cause the juicer to malfunction.
16. Do not use the appliance for anything other than its intended purpose as described in the manual
.This product is only intended for normal domestic use. Uses for a different purpose or for a
purpose which exceeds this description are considered incompatible with the intended or
designated use. Claims of all kinds due to damages resulting from unintended uses will not be
covered under warranty. The User bears the sole risk.
17. Do not extract juice from any extremely hard food (e.g. nuts), fiber-rich food (e.g. sugarcane) or
food with very little juice.
8
21600581_USHA_Manual.pdf 10 19/04/16 5:15 pm

Section 2
Caring for you:-
2.a. SAVE THESE INSTRUCTIONS
This appliance is for household use only.
(The appliance cannot be covered under warranty if the product is used in a way not intended by the
manufacturer or is used commercially.)
All details with regard to the installation, operation and care are compiled to the best of our knowledge.
No claims can be derived from the information provided, the illustrations or descriptions in this manual.
• Save the instruction manual for future reference.
• If the appliance is given as a gift, please include the manual with the product.
The safety instructions mentioned below will tell you how to use your cold press juicer without harming
yourself and damaging your juicer.
2.b. IMPORTANT SAFEGUARDS
Before using your Nutripress juicer, please read the basic safety precautions listed below:
1. Read all instructions before using your cold press juicer.
2. To protect against risk of electrical shock do not put the main unit, cord or plug in water or other
liquids and do not wash the unit in the dishwasher.
3. Children should not be allowed to use this product. Keep the product and its cord out of reach of
children.
4. Do not leave the juicer unsupervised while it is operating.
5. Unplug the power cord from outlet when - not in use, before putting on or taking off parts and
before cleaning.
6. Avoid contact with moving parts.
7. Do not operate the juicer if the power cord is damaged or if the appliance malfunctions or
damaged in any manner. Please contact the customer care executive for examination and/or
repair.
8. The use of attachments not recommended or sold by the manufacturer may cause fire, electric
shock or injury.
9. Do not use the product outdoors.
10. Do not let the power cord hang over edge of table or counter.
11. Always make sure that the hopper is closed securely before switching on the juicer. Do not open
the hopper while the juicer is in operation.
12. Be sure to switch OFF the appliance after each use. Make sure the motor stops completely before
disassembling.
13. Do not put fingers or other objects inside the feeding tube during operation. If food becomes
lodged, use pusher or another piece of fruit or vegetable to push it down. When this method does
not work, switch off the juicer and disassemble the hopper to remove the remaining food.
14. Do not alter or modify the appliance in anyway.
15. Do not open the housing on the product under any circumstances. There is a danger of an
electrical shock. In addition, it may cause the juicer to malfunction.
16. Do not use the appliance for anything other than its intended purpose as described in the manual
.This product is only intended for normal domestic use. Uses for a different purpose or for a
purpose which exceeds this description are considered incompatible with the intended or
designated use. Claims of all kinds due to damages resulting from unintended uses will not be
covered under warranty. The User bears the sole risk.
17. Do not extract juice from any extremely hard food (e.g. nuts), fiber-rich food (e.g. sugarcane) or
food with very little juice.
9
21600581_USHA_Manual.pdf 11 19/04/16 5:15 pm

2.c.SAFETY WARNING :
1) Unplug the power cord when not in
use.
2) Do not put fingers or other objects in
to the feeding tube while it is in
operation;
*It may cause injury.
3) Do not keep or operate the appliance
near infants or toddler.
* It may injure them
4) Do not put the juicer parts in the
dishwasher or extremely hot water;
*The parts may wear faster
5) Do not use the appliance on an
uneven surface;
*It may cause a malfunction if the appliance tips over.
6) Do not use any hazardous chemicals
to clean the appliance;
*It may change the color of the appliance or result in
a fire.
7) Do not repair, disassemble the base,
or customize the appliance;
*The appliance may not operate properly and may
cause fire, electric shock, or injury.
8) Do not spray water or flammable
sprays near the appliance;
*It may cause fire or electrical shock
10
21600581_USHA_Manual.pdf 12 19/04/16 5:15 pm

2.d.Before using the juicer for the first time:
1) Please clean all components thoroughly prior to juicing.
2) Examine the product for any visible external damages prior to using it. Never put a damaged product into operation.
WARNING NOTICES:
The following precautions are provided to ensure the safety of the user. Please carefully read
through the precautions and exercise care when using the appliance.
Warning: This label warns of the risk of death or severe injuries.
Caution: This label warns of the risk of injuries or appliance damage.
Prohibited
Do not disassemble
Must take action
11
21600581_USHA_Manual.pdf 13 19/04/16 5:15 pm

STEP 1: Choosing the right location:-
In order to ensure the safe and trouble-free operation of the product, the setup location must fulfil the following
prerequisites:
• Place the unit on a flat stable surface.
An unstable location may:
o May create noise as your machine may vibrate.
o May be dangerous since vibration may cause the machine to move.
• Do not use the product outdoors.
• Do not operate the product near hot gas or hot stove.
• Choose the setup location in such a way that children cannot reach the product.
• The product is not intended to be installed in a wall or a built-in cupboard.
• Do not set up the product in a hot, wet or extremely damp environment or near flammable material.
Step 2. Main unit and juicing bowl assembly
a. Before starting the assembly, please check if the Silicone plug provided below the pulp
spout is firmly inserted.
Note: The Juicer may leak if not assembled properly.
While juicing, prevent excess pulp build-up inside the pulp spout as it may dislodge the
silicone plug.
o The main unit and the juicing bowl have silver arrows to indicate the correct position
for fitment.
o Place the juicing bowl on the main unit so that the arrow on the bowl is directly
placed over the arrow on the main unit.
Section 3
3.a. Step by step process to assemble your
Nutripress juicer
12
21600581_USHA_Manual.pdf 14 19/04/16 5:15 pm

STEP 3 : Filter Assembly: -
• Insert the fine/coarse filter into the juicing bowl ensuring the black arrow on the filter is aligned with the black arrow
on the juicing bowl.
• Ensure that the filter assembly doesn’t move or wobble after fitting it inside the juicing bowl.
STEP 4: Auger Assembly:
• Place the auger inside the assembly as shown below..
• Turn the auger clockwise while pressing down so that it is locked in place.
Note: The auger needs to be locked in place in order to close the lid
13
21600581_USHA_Manual.pdf 15 19/04/16 5:15 pm

STEP 5: Hopper Assembly
• Place the hopper / feeding tube over the juicing bowl, so that the silver arrow
on the hopper is slightly outside the unlock symbol shown on the main unit.
• Ensure that the hopper is positioned directly above the auger. Turn the hopper to the left in the direction of
the arrow (clockwise) until it is locked in place. You will hear a click once the hopper is locked in place.
• Place the pusher into the feeding tube.
Part a. Placement
Part b. Locking
14
21600581_USHA_Manual.pdf 16 19/04/16 5:15 pm

STEP 6: Juice and Pulp container placement
Place the pulp container under the pulp spout and the juice container under the juice spout as shown in the illustration:
Please note:
The juicer may leak if not assembled properly.
Juicer will not operate if parts are not assembled properly.
The auger must be locked, in order to close the feeding tube with the bowl.
15
21600581_USHA_Manual.pdf 17 19/04/16 5:15 pm

Section 4
4.a. How to Operate your USHA NUTRIPRESS
(basic steps common to all kinds of recipes):-
Before Operating:
Wash all the parts before using the juicer for the first time.
Make sure that the silicone plug is assembled properly.
STEP 1: After preparing the ingredients, plug in the power cord into a wall outlet.
Note: • Do not touch the power cord with wet hands.
It may cause electrical shock, short-circuit, or fire.
• Check the safety of the wall outlet.
STEP 2 : Press the START button to operate only after
inserting few ingredients into the feeding tube.
Switch positions: -
• START: Pulls down and slowly masticates the ingredients.
• OFF : For switching off
• REVERSE: Reverse button pushes the ingredients back up to dislodge them.
Note : The REVERSE button only works while holding down the switch.
If the juicer stops during operation:
If the ingredients get jammed inside the juicer and the hopper does not open or the juicer stops during operation:
• Switch OFF ensuring that the juicer comes to a complete stop.
• Then press and hold the REVERSE button for 2~5 seconds until the ingredients get dislodged.
• Let the juicer stop completely before using the REVERSE button again to prevent malfunction.
• Repeat REVERSE - OFF - START as often as needed to achieve the desired result.
• If the juicer does not work after these steps, disassemble and clean the parts before operating the juicer again.
16
21600581_USHA_Manual.pdf 18 19/04/16 5:15 pm

STEP 3 : Insert the prepared ingredients one piece at a time.
Note : - If large quantities of ingredients are put into the feeding tube, it can cause the juicer to stop.
STEP 4: Use the smart cap to make mixed juices and to stop juice from dripping, or for a
quick rinse between different juices.
Ti p: -
• You can create mixed juices by keeping the smart cap closed during juicing.
• Quickly rinse away any leftover flavours by running a glass of water in the juicer with the smart cap closed .
• After juicing, close the smart cap to stop the juice from dripping, especially when disassembling the juicing bowl off the
base.
Note:
• Leave the smart cap open when juicing ingredients that create excessive foam during extraction, (e.g. apples, celery).
Pay close attention when operating with the smart cap closed. Juice may overflow if the juice collected in the bowl exceeds
the maximum capacity.
STEP 5: After juice and pulp are completely extracted, switch the unit OFF.
Note:
• If the remaining ingredients in the juicing bowl have not been extracted completely, the hopper may not open easily.
• After each extraction, run the juicer for an additional 30 seconds to let the juicer extract the remaining pulp.
• When the hopper is stuck, press the REVERSE - OFF -START button in this order; switching back and forth 2 or 3 times to
dislodge the ingredients. Then place hands on top of the hopper and firmly press down while simultaneously turning the
hopper counter clockwise to open.
Depending on the ingredients, pour water down the feeding tube to rinse out the interior of the juicing bowl and then
attempt to remove the hopper
4.b. Don’ts while juicing & operational warning:
1. Operating the juicer without ingredients can damage the juicer.
2. Do not continuously operate the juicer for more than 30 minutes.
This can damage the motor from overheating.
After continuous use, let the juicer rest for 30 minutes to cool down before starting another session.
3. Do not put fingers or other objects into the feeding tube. Always use the pusher when needed.
If any other object is inserted into the feeding tube during operation, such materials can get stuck and damage the juicer
parts and/or cause injury.
4. Do not put dried or hard ingredients like whole grains, fruits with hard seeds or ice into the juicer.
These may damage the juicer parts (e.g. juicing bowl, auger, and filter).
• Fruits with pits and hard seeds (e.g. peaches, mangoes and cherries) must be pitted before juicing.
• When using frozen fruits with small seeds and high liquid content such as grapes, thaw them before inserting into the
j u i c e r.
5. Do not use ingredients containing excessive amounts of vegetable oil or animal fat. Do not use the juicer to extract
vegetable oil from ingredients.
If vegetable/animal oil gets on the auger, it may reduce performance and even damage the part.
6. Do not reinsert the extracted pulp into the juicer. This can cause the juicer to stop or can jam the hopper.
7. After juicing ingredients with seeds like grapes, thoroughly clean all the crevices on the bottom of the auger.
17
21600581_USHA_Manual.pdf 19 19/04/16 5:15 pm

STEP 3 : Insert the prepared ingredients one piece at a time.
Note : - If large quantities of ingredients are put into the feeding tube, it can cause the juicer to stop.
STEP 4: Use the smart cap to make mixed juices and to stop juice from dripping, or for a
quick rinse between different juices.
Ti p: -
• You can create mixed juices by keeping the smart cap closed during juicing.
• Quickly rinse away any leftover flavours by running a glass of water in the juicer with the smart cap closed .
• After juicing, close the smart cap to stop the juice from dripping, especially when disassembling the juicing bowl off the
base.
Note:
• Leave the smart cap open when juicing ingredients that create excessive foam during extraction, (e.g. apples, celery).
Pay close attention when operating with the smart cap closed. Juice may overflow if the juice collected in the bowl exceeds
the maximum capacity.
STEP 5: After juice and pulp are completely extracted, switch the unit OFF.
Note:
• If the remaining ingredients in the juicing bowl have not been extracted completely, the hopper may not open easily.
• After each extraction, run the juicer for an additional 30 seconds to let the juicer extract the remaining pulp.
• When the hopper is stuck, press the REVERSE - OFF -START button in this order; switching back and forth 2 or 3 times to
dislodge the ingredients. Then place hands on top of the hopper and firmly press down while simultaneously turning the
hopper counter clockwise to open.
Depending on the ingredients, pour water down the feeding tube to rinse out the interior of the juicing bowl and then
attempt to remove the hopper
4.b. Don’ts while juicing & operational warning:
1. Operating the juicer without ingredients can damage the juicer.
2. Do not continuously operate the juicer for more than 30 minutes.
This can damage the motor from overheating.
After continuous use, let the juicer rest for 30 minutes to cool down before starting another session.
3. Do not put fingers or other objects into the feeding tube. Always use the pusher when needed.
If any other object is inserted into the feeding tube during operation, such materials can get stuck and damage the juicer
parts and/or cause injury.
4. Do not put dried or hard ingredients like whole grains, fruits with hard seeds or ice into the juicer.
These may damage the juicer parts (e.g. juicing bowl, auger, and filter).
• Fruits with pits and hard seeds (e.g. peaches, mangoes and cherries) must be pitted before juicing.
• When using frozen fruits with small seeds and high liquid content such as grapes, thaw them before inserting into the
j u i c e r.
5. Do not use ingredients containing excessive amounts of vegetable oil or animal fat. Do not use the juicer to extract
vegetable oil from ingredients.
If vegetable/animal oil gets on the auger, it may reduce performance and even damage the part.
6. Do not reinsert the extracted pulp into the juicer. This can cause the juicer to stop or can jam the hopper.
7. After juicing ingredients with seeds like grapes, thoroughly clean all the crevices on the bottom of the auger.
18
21600581_USHA_Manual.pdf 20 19/04/16 5:15 pm