USX-MOUNT XAS309-1 User manual

XAS309-1
INSTRUCTION MANUAL
For 37-70" TV
If you have any questions along the way, just give us a call
1-800-460-0956 or mail to [e-mail].
We’re ready to help!
R

Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
2
Does your TV
(including accessories)
weigh MORE than
99 lbs. (45 kg)?
Do you have
all the tools
needed?
(NOT INCLUDE) Tape
Measure
CAUTION
Screw
driver
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:600mm/23.62"
(MIN:150mm/5.91")
MAX:400mm/15.75"
(MIN:100mm/3.94")
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please feel free to contact Customer
Service:
E-mail: [e-mail]
Phone call: 1-800-460-0956

TV INTERFACE
3
3D
TOP VIEW-RETRACTED SIDE VIEW
MAX:600mm[23.62in]
MIN:150mm[5.91in]
MAX:400mm
[15.75in]
MIN: 100mm
[3.94in]
430mm
[16.93in]
262mm
[10.31in]
732mm
[28.82in]
612mm
[24.10in]

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
4
Allen Key
x1
Brackets
x2
Spacers
TV Screws
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x45mm
M6x17mm
M8x22mm
M4 M6
10mm
2.5mm
Washers
x4 x4
x4 x4
x4 x4
x4
x4 x4
x8 x4
x4

Hardware for Products Assembly
5
Glass Base Lower ColumnPlastic Sleeve Iron Sheet
M6x10mm
Bolt
M8x30mm
Bolt
x8 x4
x1 x1x1 x1
Cable Clips
x3
Upper Column
x1
M5x8mm
Bolt
x3x1
Left Wall Plate
x1
Right Wall Plate

6
M8
M6
M4
1-1 Select TV Screws

1-2 Figure out the suitable position of brackets
INSTALL UP/DOWN IF NEEDED TV BRACKETS MUST BE LEVEL
7
LOW MOUNTING HOLES HIGH MOUNTING HOLES

Tips: If you need to combine M6/M8(c/e/f) screws with
2.5mm spacers( i ), you have to remove the inner circle.
Yes, choose suitable screws, washers and spacers.
1-4 Attach the TV Plate
No!
No, choose suitable screws and washers.
1-3 Need Spacer?
8

2-1 Assemble the column on the glass base through iron sheet and plastic sleeve
with screws and allen key .
9
2-2 Assemble upper column into column using bolts .

Pre-assembled
column unit
10
Using bolts to connect left wall plate and right wall plate with pre-assembled column unit.

TV
1 2
11
CAUTION: BRACKETS MUST BE PUT INTO LEFT WALL PLATE FULLY!

5-1 TV Tilting up adjustment (+3°):
If you need to tilt TV, you can loosen the bolts below and tilt up +3°. Then tighten the bolts.
+3°
12

5-2 Height Adjustment
If the TV height is still not suitable, you can adjust the height by following the steps below.
Loosen
Fasten
13
TV
1 2
Maximum height Minimum height
Fasten

5-3 Swivel Adjustment
18°
18°
14

5-4 Tidy your Cables
Press to Lock
15