V-TAC 80133970 User manual

INSTRUCTION MANUAL
LED TABLE LAMP WITH WIRELESS CHARGER
WEEE Number: 80133970
Thank you for selecting and buying V-TAC Wireless Charger device. V-TAC will serve you the
best. Please read these instructions carefully before starting the installation and keep this
manual handy for future reference. If you have any other query, please contact our dealer or
local vendor from whom you have purchased the product. They are trained and ready to serve
you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The
company gives no warranty against damage to any surface due to incorrect removal and
installation of the product. This product is warranted for manufacturing defects only.
INTRODUCTION & WARRANTY
SKU: 8604 SKU: 8605

Wireless charging desk lamp is an intelligent product. It uses LED source which is most
advanced lighting-tech with uniform and soft, high efficiency and CRI, advanced constant
current and flicker-free to protect your eyes. With 0-300°adjustablearm, the lamp is able to
reach almost every position you can imagine. Also, it has built-in wireless charger which is
compatible with any Qi-standard phones and devices.
Wireless Charging
Desk Lamp (1pc)
User Manual
(1pc)
USB Charging
Cable (1pc)
3A Adapter
Included (1pc)
PACKAGE CONTENTS
TECHNICAL DATA
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
This marking indicates that this
product should not be disposed
of with other household wastes.
MODEL VT-7705
RATING INPUT DC:5V/3A
INPUT POWER AC: 100-240V, 50/60Hz
COLOR TEMPERATURE 2700K- 6500K
CRI >80
BRIGHTNESS DIMMING 3 LEVELS
LAMP POWER 5V, 0.8A (4W)
ILLUMINANCE 800 LUX
LONG LIFE 20,000 HOURS
WIRELESS CHARGING OUTPUT 5V, 1A (5W)
ON/OFF CYCLE >10,000
OPERATION TEMPERATURE 20 TO 45
TIME TO REACH THE BRIGHTNESS 2S

• Put the micro USB port into the power input of the desk lamp
• Refer to the functions of each button in previous page (Outline) to use the lamp.
Short press is required to adjust the functions except that brightness increase and
decrease need long press.
• When using the wireless charging function, place phones with Qi receiver onto
the wireless charging area. At this time, the wireless charging indicator turns on
and flickers to indicate that wireless charging is ON. The indicator turns off after
the phone is removed.
OPERATION GUIDE
FIG 1
PARTS INDICATOR
Wireless charging area
Brightness Decrease
Brightness Increase
Light Mode / Light Power
Button

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [e-mail]
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
1. Please do not put the lamp on high temperature surfaces, and do not use it in
flammable or humid
environment to avoid the breakdown, short circuit etc.
2. The adapter must be under the specialized range.
3. Place the base of table lamp on steady base while adjusting the arm.
4. The lamp head of the table lamp can be adjusted up to certain angle only. Be
careful not to overturn the lamp head beyond the adjusting angle in order to avoid
any damage to the lamp.
OPERATION CAUTIONS
1. Please clean the lamp once in every two months to keep it smooth and bright.
2. Use cleaning cloth and water to clean the dust
3. For filthy marks, please use cleaning cloth and soapsuds.
4. Please do not clean the lamp by high-volatility and high-corrosive liquid which
can lead to discoloring or damaging the lamp.
5. To ensure using effect, please use an DC5V/3A adaptor and good quality cable
6. Please keep it away from water or other liquid
7. Power off the lamp before it is cleaned
MAINTENANCE