V-tech CL6527A User manual

hkphones.vtech.com
Model:
CL6527A
User's manual

2
TABLE OF CONTENT
Important safety instructions 7
What’s in the box 11
Getting started 12
Location 12
Handset Overview 13
Base Overview 16
Display Icons Overview 19
Main Menu Structure 21
Connect 23
Install the Handset Battery 25
Charge the Batteries 26
Keystroke Table 26
Navigating the Handset Menu 26
Telephone operation 27
Make a Call 27
Call from the Phonebook 27
Speakerphone 28
Volume Boost 28
Search Alphabetically for Phonebook Entries 28
Call from the Call Log 29

3
Call from the Redial List 29
Answer a Call 29
Adjust Earpiece and Speakerphone Volume 29
Temporary Ringer Silencing 30
End a Call 30
Call Timer 30
Redial 31
Chain Dialing 32
Find the Handset (Paging) 33
Internal Calls 34
Power Fail Back-up 36
Telephone settings 38
Date and Time Settings 38
Handset Settings 39
Base Settings 42
Call log 45
View the Call Log 45
Store a Call Log Number into the Phonebook 46
Delete an Entry in the Call Log 46
Delete All Entries of the Call Log 46
View the Details of a Call Entry 46
Phonebook 47
Store a Number Entry in the Phonebook 47

4
Entering Names 48
Writing Tips 48
Review an Entry 48
Dial an Entry 48
Search a Phonebook Entry Alphabetically 49
Edit a Phonebook Entry 49
Delete a Phonebook Entry 49
Delete All Phonebook Entries 49
Check phonebook capacity 50
Speed dial 51
Assign a Speed Dial Number from the Directory 51
VIP list 52
Call Guard 53
Call Guard Announce 53
Outgoing Message for Calls without Number 53
Set Block Mode 54
Block Private or Unavailable Calls 54
Add a Block List Entry 55
Review Block List Entries 55
Edit a Block List Entry 55
Delete a Block List Entry 56
Delete all Block List Entries 56

5
Answering system 57
Answer On/Off 57
Message Playback 58
Delete All Messages 59
Record, Play, or Delete Memos 59
Announcement 60
Number of Rings 61
Recording Time 61
Remote Access Setting 62
Change Remote Access PIN Code 62
Call Screening 63
Call Intercept 63
Remote Access 64
Direct Memory Keys 65
Base photo Speed Dial Keys 66
SOS Emergency Calls 67
Reminder Alarm 70
Talking Digits 71
Device setup 72
Add a New Device 74
Test Device Signal Strength 75

6
Sensor operations 76
Sensor mode 76
Arm/Disarm the sensor alert system 77
Sensor Arm/Disarm PIN protection 78
Specic device operations 79
Doorbell 79
Extension Ringer 82
Device Monitoring 83
General product care 84
Frequently asked questions 85
Technical specications 86

7
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not use this product near water such as near a
bath tub, wash bowl, kitchen sink, laundry tub or a
swimming pool, or in a wet basement or shower.
5. Do not place this product on an unstable table, shelf,
stand or other unstable surfaces.
6. Avoid placing the telephone system in places with
extreme temperature, direct sunlight, or other
electrical devices. Protect your phone from moisture,
dust, corrosive liquids and fumes.
7. Slots and openings in the back or bottom of the
telephone base and handset are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product
on a soft surface such as a bed, sofa or rug. This
product should never be placed near or over a radiator
or heat register. This product should not be placed in
any area where proper ventilation is not provided.
8. This product should be operated only from the type
of power source indicated on the marking label. If you

8
are not sure of the type of power supply in your home
or office, consult your dealer or local power company.
9. Do not allow anything to rest on the power cord. Do
not install this product where the cord may be walked
on.
10. Never push objects of any kind into this product
through the slots in the telephone base or handset
because they may touch dangerous voltage points or
create a short circuit. Never spill liquid of any kind on
the product.
11. To reduce the risk of electric shock, do not disassemble
this product, but take it to an authorized service facility.
Opening or removing parts of the telephone base or
handset other than specified access doors may expose
you to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when the
product is subsequently used.
12. Do not overload wall outlets and extension cords.
13. Unplug this product from the wall outlet and refer
servicing to an authorized service facility under the
following conditions:
• When the power supply cord or plug is damaged or
frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operation
instructions. Improper adjustment of other controls
may result in damage and often requires extensive
work by an authorized technician to restore the
product to normal operation.

9
• If the product has been dropped and the telephone
base and/or handset has been damaged.
• If the product exhibits a distinct change in
performance.
14. Avoid using a telephone (other than cordless) during
an electrical storm. There is a remote risk of electric
shock from lightning.
15. Do not use the telephone to report a gas leak in the
vicinity of the leak. Under certain circumstances, a
spark may be created when the adapter is plugged
into the power outlet, or when the handset is replaced
in its cradle. This is a common event associated with
the closing of any electrical circuit. The user should not
plug the phone into a power outlet, and should not
put a charged handset into the cradle, if the phone is
located in an environment containing concentrations
of flammable or flame-supporting gases, unless
there is adequate ventilation. A spark in such an
environment could create a fire or explosion. Such
environments might include: medical use of oxygen
without adequate ventilation; industrial gases (cleaning
solvents; gasoline vapours; etc.); a leak of natural gas;
etc.
16. Only put the handset of your telephone next to your
ear when it is in normal talk mode.
17. Use only the adapters included with this product.
Incorrect adapter polarity or voltage can seriously
damage the product.
Base unit adapter: Input 100-240V AC 50/60Hz;
Output: 6V DC 800mA;
Handset charger adapter: Input 100-240V AC 50/60Hz;
Output: 6V DC 450mA

10
18. The power adapter is intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet
outlet.
19. For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
20. Telephone receivers produce magnetic fields that can
attract small metallic objects such as pins or staples.
To avoid injury, do not place the handset where such
objects can be picked up.
SAVE THESE INSTRUCTIONS
Battery
• CAUTION: Use Only Supplied Batteries.
• Do not dispose of the batteries in a fire. Check with
local waste management codes for special disposal
instructions.
• Do not open or mutilate the batteries. Released electrolyte
is corrosive and may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if swallowed.
• Exercise care in handling batteries in order not to create
a short circuit with conductive materials.
• Charge the batteries provided with or identified for
use with this product only in accordance with the
instructions and limitations specified in this manual.