V-tech VC7151 User manual

Sensors and Handset
Registration Guide
(Canada version)
VC7151
VC7151-101
VC7151-109
VC7152-201
VC7152-301
Wireless Monitoring System
with Cordless Telephone
Go to www.vtechcanada.com
to register your product for
enhanced warranty support and
the latest VTech product news.

How the system works
Open/Closed sensor
Apply this magnetic
Open/Closed sensor
to a door, window, or
medicine cabinet to know
if it is open or closed.
Garage Door Sensor
Detects whether the
garage door is open or
closed.
Telephone system
Includes a telephone base
and cordless handset
(some models include
additional handsets). The
base and handset screens
show call information and
sensor alerts. The sensor
sends alerts to the phone
system or sends remote
alert calls to other numbers
you have specified.
Local alert Remote alert
*
To set telephone numbers for
remote calls, please refer to
the Sensor mode section in
the Abridged User’s Manual.
Motion Sensor
(sold separately)
Lets you know when
there are visitors,
intruders, or pets
moving around your
home.
* The combination of sensors depends on the package you purchased.

1
Introduction
This Wireless Monitoring System with VTech ULE consists of the telephone system, Garage Door
Sensor and Open/Closed Sensor.
Telephone system - Includes a telephone base and cordless handset (some models include
additional handsets). The base and handset screens show call information and sensor alerts. The
sensor sends alerts to the phone system or sends remote alert calls to other numbers you have
specified.
Open/Closed Sensor - Apply this magnetic Open/Closed Sensor to a door, window, or medicine
cabinet to know if it is open or closed.
Garage Door Sensor - Detects when the garage door is open or closed.
Motion Sensor (sold separately) - Lets you know when there are visitors, intruders, or pets moving
around your home.
If you purchased new accessary sensors and/or handsets, or accidentally deregistered your
sensors, you will have to register them to the telephone base.
After you have registered the sensors to the telephone base, you can then mount the sensors.

2
Add a new sensor
You can also add new ULE Garage Door Sensor (VC7001), Open/Closed sensor (VC7002), or
Motion Sensor (VC7003) to your telephone system (all purchased separately). You can register up
to 400 ULE sensors to the telephone base.
To register a new VC7001 Garage Door
Sensor to the telephone base:
NOTE
Make sure you have installed the battery in the
sensor before registering.
Press MENU on the telephone base
when idle.
Scroll to Sensor setup, and then
press SELECT.
Scroll to Add new sensor, and then press
SELECT. The screen displays For sensor
pairing process, see manual.
Press and hold the pair button on the Garage
Door Sensor, until the LED light flashes red.
Press NEXT on the telephone base.
When the registration process is complete, the red
LED light on the sensor will remain steady for about
two seconds, and then turn off. The registration
process takes about 90 seconds to complete.
•
1.
2.
3.
4.
5.

3
To register a new VC7002 Open/Closed
Sensor to the telephone base:
NOTE
Make sure you have installed the battery in the
sensor before registering.
Press MENU on the telephone base
when idle.
Scroll to Sensor setup, and then
press SELECT.
Scroll to Add new sensor, and then
press SELECT. The screen displays
For sensor pairing process, see manual.
Press and hold the Pbutton on the
Open/Closed Sensor, until the LED
light flashes red.
Press NEXT on the telephone base.
When the registration process is complete, the
red LED light on the sensor will remain steady
for about two seconds, and then turn off. The
registration process takes about 90 seconds to
complete.
•
1.
2.
3.
4.
5.
P
P

4
To register a new VC7003 Motion Sensor to
the telephone base:
NOTES
Make sure you have installed the battery in the
sensor before registering.
If you have just inserted the battery in the sensor,
wait for the red LED on the sensor to stop flashing.
Press MENU on the telephone base
when idle.
Scroll to Sensor setup, and then
press SELECT.
Scroll to Add new sensor, and then press
SELECT. The screen displays For sensor
pairing process, see manual.
Use a narrow pointed object such as a pen
to press and hold the PAIRING button on
the Motion Sensor, until the LED light at
the front side flashes green.
Press NEXT on the telephone base.
When the registration process is complete,
the green LED light on the sensor will remain
steady for about two seconds, and then turn
off. The registration process takes about 90
seconds to complete.
•
•
1.
2.
3.
4.
5.

5
Add a new handset
You can add new DECT 6.0 cordless handset (VC7100) (purchased separately) to your telephone
system. This telephone system accommodates up to five DECT cordless handset.
To register a new VC7100 handset to the
telephone base:
NOTE
Make sure you have installed the battery in the
handset before registering.
Place the new/non-registered handset in the
telephone base. The handset and telephone base
show Registering... Please wait.
The handset and telephone base show
HANDSET X registered and you hear a beep
when the registration process completes. The
registration process takes about 90 seconds to
complete.
•
•

6
Disclaimer
This product is not designed for security purposes. When properly installed and maintained, this
product may in some cases reduce the risk of burglary, fire, robbery or other events occurring
without providing an alarm. VTech is not responsible for losses, injury, or damage resulting from
the use of this product.
This product is covered by U.S. Patent #8,825,043. Other patents may be pending.

Specifications are subject to change without notice.
© 2016 for VTech Technologies Canada Ltd.
All rights reserved. 02/16. VC715X_CA_Registration_Guide_V2.0