V-tech 2-in-1 Learn & Zoom Motorbike User manual

User’s Manual
© 2015 VTech
Printed in China
91-003093-000
2-in-1 Learn & Zoom Motorbike™
US

3
INTRODUCTION
Thank you for purchasing the VTech®2-in-1 Learn & Zoom Motorbike™
learning toy!
Zoom around with the 2-in-1 Learn & Zoom Motorbike™. This 2-in-1
bike grows with your child and transforms from a tricycle into a two-wheel
bike. It also features an Interactive Dashboard that introduces objects,
colors and road safety.
TWO BACK WHEELS
ARROW
BUTTONS
SPEEDOMETER
DIAL
SHAPE BUTTONS
MODE
SELECTOR DIAL
ON/OFF/VOLUME
CONTROL SWITCH
Introduction

4
Included In This Package
INCLUDED IN THIS PACKAGE
• One VTech®2-in-1 Learn & Zoom MotorbikeTM Interactive Dashboard
• One vehicle body
• Two back wheels
• One instruction manual

5
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy and
should be discarded for your child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches etétiquettes.
Ils ne font pas partie du jouet.
NOTE: Please keep user’s manual as it contains important
information.
Unlock the packaging locks:
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the Interactive Dashboard. Use a coin or
a screwdriver to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new,
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
Rotate the packaging locks 90 degrees
counter-clockwise.
Pull out the packaging locks.
Getting Started

6
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Donotdisposeofbatteriesinre.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started

7
Label Instructions
Please adhere the labels to the vehicle body
securely as indicted below:

8
ASSEMBLY INSTRUCTIONS
1. Insert the Interactive Dashboard
into the slot on the top of the vehi-
cle body. You will hear it click into
place when it is inserted correctly.
2. To assemble the back wheels in the
tricycle position, insert each of the
wheels into the slot on the bottom
of the vehicle body so the tricycle
labels are visible. You will hear the
wheels click into place when they
are inserted correctly.
3. To assemble the back wheels in
the motorcycle position, insert each
of the wheels into the slot on the
bottom of the vehicle body so the
motorcycle labels are visible. You
will hear the wheels click into place
when they are inserted correctly.
4. To remove the wheels, slide the
wheel locks inward to unlock the
wheels.
With the VTech®2-in-1 Learn & Zoom MotorbikeTM safety comes
rst.Toensureyourchild’ssafety,adultassemblyisrequired.
Assembly Instructions

9
PRODUCT FEATURES
1. ON/OFF/VOLUME CONTROL SWITCH
To turn the unit ON, slide the ON/
OFF/VOLUME CONTROL SWITCH
to the LOW VOLUME ( ) or HIGH
VOLUME ( ) position. To turn the
unit OFF, slide the ON/OFF/VOLUME
CONTROL SWITCH to the OFF ( )
position.
2. MODE SELECTOR DIAL
Turn the MODE SELECTOR DIAL
to select the LEARNING MODE
( ) or the RIDE-ON MODE ().
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®2-in-1 Learn & Zoom
MotorbikeTM will automatically power-down after approximately
60 seconds without input. The unit can be turned on again by
pressing any button.
Product Features

10
ACTIVITIES
1. Slide the on/off/volume control
switch to turn the unit on. You will
hear a playful sound, a song and
funphrase.Thelightswillashwith
the sounds.
2. Press the shape buttons to learn
shapes and hear playful songs in
the learning mode. In the ride-on
mode you will learn objects and
hear fun phrases and answer
simple questions. The lights will
flash with the sounds.
3. Press the arrow buttons to learn
colors and hear fun phrases and
music in the learning mode. In the
ride-on mode you will learn colors
and hear fun phrases. The lights
willashwiththesounds.
4. Press the speedometer button to
hear music in the learning mode
and sounds in the ride-on mode.
Thelightswillashwiththesounds.
Activities