V-tech Clips 'n Colors Peacock Assembly Instructions

Clips ’n Colors Peacock™
Parent’s Guide
91-003784-006 US

2
2
2
INTRODUCTION
Thank you for purchasing the VTech®Clips ’n Colors Peacock™
Explore and discover with this brightly colored, light-up peacock.
Learn about colors, shapes, numbers, counting and emotions! Add
or remove Peacock’s pegs and he will share his emotions: happy,
sad, angry or surprised.
On/Off/Mode Selector
8 Feather Pegs
8 Light-Up
Shape Buttons
Beak Button
Low/High/Volume Selector

3
3
3
INCLUDED IN THIS PACKAGE
•Clips ’n Colors Peacock™
• Parent’s Guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas
partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il
comporte des informations importantes.
Unlock the Packaging Lock
• 8 Feather Pegs
Rotate the packaging lock 90 degrees
counterclockwise.
Pull out the packaging lock and discard.

4
4
4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located
on the back of the unit and use a
screwdriver to loosen the screw and
open the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 2 new AA size (LR6/AM-3)
batteries following the diagram
inside the battery box.
5. Replace the battery cover and
tighten the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity (+ and - ).
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

5
5
5
MISE EN GARDE
Les piles fournies avec le produit permettent de tester le jouet en
magasin mais ne sont pas des piles longue durée.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant les
polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur en
court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-utilisation
prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.
PRODUCT FEATURES
1. On/Off/Mode Selector
Slide the On/Off/Mode Selector from left to right to switch the
unit on and choose a mode: Explore & Learn mode, Quiz mode
or Music mode. Slide the switch back to the Off position to turn
the unit off.
2. Low/High/Volume Selector
Slide the Low/High/Volume Selector on the back of the
Clips ’n Colors Peacock™ to the left for lower volume and to
the right for higher volume.

6
6
6
3. Beak Button
Press the Beak Button to hear
the Clips ’n Colors Peacock™
introduce himself in Explore &
Learn mode, give hints to answer
the questions in Quiz mode and
hear him sing in Music mode.
4. Light-Up Shape Buttons
Press the Light-Up Shape Buttons to learn the shapes and
colors in Explore & Learn mode, answer the questions in Quiz
mode and hear music in Music mode.
5. Feather Pegs
Add or remove the pegs to explore emotions, and to learn about
colors and counting in Explore & Learn mode and answer the
questions in Quiz mode. Add a peg to Peacock’s tail to hear
music in Music mode.
6. Automatic Shut-Off
To preserve battery life, the Clips ’n Colors Peacock™will
automatically shut off after about 90 seconds without input.
The unit can be turned on again by moving the On/Off/Mode
Selector to any mode.

7
7
7
To Exit Try-Me Mode
The Clips ’n Colors Peacock is in Try-Me mode. To activate the full
program after purchase, turn the unit On and slide the Low/High/
Volume Selector on the back of the product to enter normal play.
Two beeping sounds indicate that the peacock has exited the Try-
Me mode.
MODES
Mode 1: Explore & Learn Mode
Move the On/Off/Mode Selector to the second position to enter this
mode. Add or remove the pegs from Peacock’s tail to learn about
emotions, colors and counting. With a Feather Peg attached to
the tail, press a Shape Button to learn about emotions, colors and
counting. Press a Shape Button without the Feather Peg attached
to learn about colors and shapes. Press Peacock’s Beak Button to
hear fun facts about the peacock.
Mode 2: Quiz Mode
Move the On/Off/Mode Selector to the third position to enter this
mode. Peacock will ask questions. To answer, press the buttons
or add or remove a peg. If you need help, press Peacock’s Beak
Button for a hint.
Mode 3: Music Mode
Move the On/Off/Mode Selector to the fourth position to enter this
mode. Press the Shape Buttons or add a peg to Peacock’s tail to
hear music. Press Peacock’s Beak Button to hear Peacock sing.

8
8
8
SONG LYRICS
Song 1:
Look at my beautiful feathers.
They come in lots of colors.
Just pick a color and press on a feather to see how I’m feeling.
Blue means I’m sad, and yellow means I’m happy.
Red is the sign I’m very angry, and purple means I’m surprised!
Song 2:
Yellow, blue, red and purple.
I have lots of different colors.
Yellow, blue, red and purple.
Won’t you play with me?
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.

9
9
9
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which
forms the value of our products. However, errors sometimes
can occur. It is important for you to know that we stand behind
our products and encourage you to call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in
Canada, or by going to our website at vtechkids.com and filling
out our Contact Us form located under the Customer Support
link with any problems and/or suggestions that you might have.
A service representative will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television

10
10
10
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
Supplier’s Declaration of Conformity
Trade Name: VTech®
Model: 5258
Product Name: Clips ’n Colors Peacock™
Responsible Party: VTech Electronics North America, LLC
Address: 1156 W. Shure Drive, Suite 200
Arlington Heights, IL 60004
Website: vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)