V-tech Muttzart's Symphony Sounds User manual

®
USER'S MANUAL
© VTECH
Printed in China
91-01372-000

1
Dear Parent:
At VTECH®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights and
music, all VTECH®infant and toddler learning products encourage
your child’s natural growth and discovery skills. When it comes to
providing electronic learning products that enlighten, entertain and
develop minds, at VTECH®we see the potential in every child.

2
INTRODUCTION
Thank you for purchasing the VTECH®LITTLE SMART Muttzart’s
Symphony Sounds™ learning toy! This product is one of a family of
high-qualityLITTLESMART®electronic learningproducts. Weat VTECH®
are committed to providing the best possible products to entertain and
educate your child. Should you have any questions or concerns, please
call our Consumer Services Department at 1-800-521-2010 in the U.S.
or 1-800-267-7377 in Canada.
The LITTLE SMART Muttzart’s Symphony Sounds™ learning toy is a
soft and cuddly plush toy designed for infants birth and up. This adorable
puppy has three interactive sensors that trigger lights, classical music
and sound effects. With LITTLE SMART Muttzart’s Symphony
Sounds™ you’re never too young to learn the classics!
LIGHT SENSOR
BONE BUTTON
SPEAKER
LIGHT
RATTLE BEADS
MODE SELECTOR
SOUND SENSOR
VIBRATION SENSOR

3
INCLUDED IN THIS PACKAGE
- One VTECH®LITTLE SMART Muttzart’s Symphony Sounds™
learning toy.
- One instruction manual.
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover inside the back
of the unit. Use a screwdriver to loosen
thescrew.
3. Install 2 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replacethebattery cover and tighten the
screw to secure the battery cover.

4
BATTERY NOTICE
• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE:Iffor somereasonthe program/activitystopsworking, pleasefollow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services Department
at1-800-521-2010 in theU.S.or 1-800-267-7377inCanada, and aservice
representative will be happy to help you.

5
CRIB ATTACHMENT
1. Detach the collar from under the puppy’s
chin.
2. Reverse the collar and attach it to the crib
bar.
TO BEGIN PLAY
1. Slide the ON/OFF/MODE SELECTOR
SWITCHto the PLAYTIME MODE ( )
or the QUIET TIME MODE ( )
position. You will hear a short tune and
see the light flash.

6
2. To adjust the volume, slide the VOLUME
CONTROL SWITCH located in the back
of the unit near the battery compartment
to( )for LOW VOLUME and ( ) for
HIGH VOLUME.
3. To turn the unit OFF, slide the ON/OFF/
MODE SELECTOR SWITCH to the OFF
( ) position.
Note: To preserve battery life, the LITTLE SMART Muttzart’s
Symphony Sounds™ learningtoywillautomaticallypowerdown
after a few minutes without input. The unit can be turned on again
by pressing the bone button.
ACTIVITIES
A. Playtime Mode
1. Slide the ON/OFF/MODE
SELECTOR SWITCH to the
PLAYTIME MODE ( )position.You
willhear“Hi baby!” followed by ashort
tune and see the light flash.
“Hi Baby!”

7
2. Press the BONE BUTTON once to
hear “Hi baby!” followed by a giggle
sound effect. Press a second time to
heara random, upbeat classicalmusic
tune.The light will flash with the voice
and music.
3. Press the BONE BUTTON while a
melody is playing to change the
melody. The light will flash with the
music.
4. Cover Muttzart’s forehead for 2-3
secondsto hear“Peek-a-boo”,a giggle
sound effect or a yawn sound effect.
The light will flash with the voice and
soundeffects.
5. Cover Muttzart’s forehead while a
melody is playing to hear the voice or
soundeffect play on top ofthemelody.
The light will flash with music under
normal lighting.
“Peek-a-boo”
“Hi Baby!”

8
6. Gently move Muttzart to hear a cute
barking sound effect. The amount of
barking is based on the amount of
movement.
7. Gently move Muttzart while a melody
is playing to hear the barking play on
top of the melody. The light will flash
withmusic.
8. Muttzart is equipped with an unique
sound detection feature. This feature
will activate a random phrase, sound
effect or melody after 1-2 seconds of
sound.
B. Quiet Time Mode
1. Slide the ON/OFF/MODE
SELECTOR SWITCH to the QUIET
TIME MODE ( ) position. You
will hear a short tune and see the
light flash.

9
2. PresstheBONE BUTTONto hearfour
soft classical melodies played at a
lower volume. The light will remain on
whilethe musicplays. PresstheBONE
BUTTON again to hear another
melody.
3. Cover Muttzart’s forehead for 2-3
seconds to hear “Good night” or a
yawn sound effect. The light will
remain on with the sound.
4. Cover Muttzart’s forehead under
normal lighting while a melody is
playing to hear the voice or sound
effect play on top of the melody. The
light will remain on while the music
plays.
5. Muttzart is equipped with a unique
sound detection feature. This feature
will activate four soothing melodies
after 3-4 seconds of sound.
“Good
Night”