V-tech DigiArt User manual

User’s Manual
© 2016 VTech
All rights reserved
Printed in China
91-003216-006 US

Dear Parent,
At VTech®, we know how important the first day  school is for your
child. To help prepare preschoolers for this important event, VTech® has
developed the Preschool Learning™ series  interactive ts.
Preschool Learning™ features fun characters and inviting school themes
that use technology to capture a child’s aention and teach important
preschool skills like spelling, counting and the alphabet. ese vital skills
are taught in a way that's bh fun and highly engaging to maintain a
child's interest. Children will also be introduced to fun school suects
such as art cla, music cla and even rece! With Preschool Learning™,
learning is fun om day one!
At VTech®, we know that a child has the ability to do great things.
at’s why all  our electronic learning products are uniquely designed
to develop a child’s mind and allow them to learn to the best  their
ability. We thank you for trusting VTech® with the important job 
helping your child learn and grow!
Sincerely,
Your iends at VTech®
To learn more about VTech® ts, visit www.vtechkids.com

3
INTRODUCTION
Thank you for purchasing the VTech®DigiArt Creative EaselTM.
The DigiArt Creative EaselTM transforms into a dry-erase board,
chalkboard or drawing table. Using the magic pen, children can follow
the blinking lights to draw more than 150 letters, numbers, objects and
shapes. They can also explore their creativity and draw anything they
want.
INCLUDED IN THIS PACKAGE
• One DigiArt Creative EaselTM (assembly required)
• Threepiecesofchalk
• Onedry-erasemarker
• User’smanual
WARNING:
All packing materials such as tape, plastic sheets, packaging locks and
tags are not part of this toy and should be discarded for your child’s
safety.
NOTE: Please keep this user’s manual as it contains important
information.
ACTIVATING NORMAL PLAY
1. Press the ON/OFF button to turn the unit on.
2. Press the FREE DRAW BUTTON.
3. Place and hold the MAGIC PEN on an LED dot for 2 seconds.
PARTS Of
THE DIGIART CREATIvE EASELTm
INTRODUCTION
SUPPLIES TRAY (B)
CHALKBOARD/DRY-ERASEBOARD(A)
LEGS

4
20 21 22 16
18
17
9
10
12
14
2
3
7
8
6
5
4
1
13
19
15
PARTS Of THE DIGIART CREATIvE EASELTm
5MAGIC PEN
2DRY-ERASEBOARD
6SUPPLIES TRAY
3LED SCREEN AREA
7CHALKBOARD
4MAGICPENHOLDER
8BATTERYCOMPARTMENT
9ON/OFFBUTTON
10 LETTERBUTTONS
11 NUMBERBUTTON
12 VOLUMEDOWNBUTTON
13 VOLUMEUPBUTTON
14 MUSICON/OFFBUTTON
15 BRIGHTNESSBUTTON
16 DRAWOBJECTSBUTTON
17 DRAWSHAPESBUTTON
18 GUESSTHEPICTUREBUTTON
19 FREEDRAWBUTTON
20LEFTARROWBUTTON
21OKBUTTON
22RIGHTARROWBUTTON
1PAPER CLIP
11

5
ASSEmBLY INSTRUCTIONS
ASSEmBLY INSTRUCTIONS
Adult assembly required. For your child’s safety, do not let your
child play with the toy until it is fully assembled.
DRY-ERASE EASEL fORm
Step 1:
To attach the SUPPLIES TRAY (B) to the CHALKBOARD/DRY-ERASE
BOARD (A), use the hooks on the SUPPLIES TRAY (B) to connect it to
part A1 of the CHALKBOARD/DRY-ERASE BOARD (A).
Step 2:
Lift the wide area of part A2 of the CHALKBOARD/DRY-ERASE
BOARD (A). Then unsnap the narrow area of part A2 and move it
towards the SUPPLIES TRAY (B). Insert the narrow part of A2 into the
slot on the back of the SUPPLIES TRAY (B), lining up the hole of A2
with the center screw of the SUPPLIES TRAY (B).

6
Step 3:
Tightenthecenterscrewbypushingitinandturningitclockwisetox
it in position.
Step 4:
Insert two LEGS into part A2 of the CHALKBOARD/DRY-ERASE
BOARD (A) and two LEGS into the bottom of the SUPPLIES TRAY (B).
The LEGS will lock into place.
ASSEmBLY INSTRUCTIONS

7
TRANSfORm fROm DRY-ERASE BOARD TO
CHALKBOARD
Step 1:
Make sure the MAGIC PEN is placed in the MAGIC PEN HOLDER.
Step 2:
Detach the CHALKBOARD/DRY-ERASE BOARD (A) from the stand
by pulling up, turning it over to the chalkboard side and putting it into
the stand again.
To change the chalkboard back into a dry-erase board, reverse the
order of the steps above.
TRANSfORmATION INSTRUCTIONS

8
TRANSFORM FROM EASEL TO DRAWING TABLE
Step 1:
Make sure the unit is turned OFF and in DRY-ERASE BOARD mode
before transforming. Loosen the center screw by pushing in and turning
it counterclockwise.
Step 2:
Hold the CHALKBOARD/DRY-ERASE BOARD (A) with one hand and
with the other hand, move the back legs slowly backwards until the
CHALKBOARD/DRY-ERASE BOARD (A) lies horizontally on the four
LEGS.
TRANSfORmATION INSTRUCTIONS

9
Step 3:
Snap A2 into place and tighten the center screw by pushing it in and
turning it clockwise to x it in position. Then tighten the left and right
screws on the SUPPLIES TRAY (B) by turning them clockwise. The
DRAWING TABLE is now ready to use and the LED SCREEN AREA
will rotate automatically.
TRANSfORm fROm DRAWING TABLE
TO EASEL
Step 1:
Make sure the unit is turned OFF before transforming. Loosen the
left and right screws on the SUPPLIES TRAY (B) by turning them
counterclockwise. Then, loosen the center screw by pushing in and
turning it counterclockwise.
TRANSfORmATION INSTRUCTIONS

10
GETTING STARTED
Step 2:
Unsnap A2, lift the CHALKBOARD/DRY-ERASE BOARD (A) with one
hand and move the back legs forward with the other hand. Insert A2 into
the slot on the back of the SUPPLIES TRAY (B), lining up the hole of A2
with the center screw of the SUPPLIES TRAY (B).
Step 3:
Tightenthecenterscrewbypushingitinandturningitclockwisetox
it in position.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery compartment on the
bottomofthechalkboard.Openthebattery
cover by sliding the tab.
3. Remove the exhausted batteries and install
4 new “AA” batteries as illustrated.
4. Replace the battery cover and push down
until it clicks into position.