V-tech Farm & Learn Animal Wagon User manual

© 2015 VTech
Printed in China
91-003021-002
User’s Manual
Farm & Learn Animal WagonTM

2
VEHICLE
WAGON
KIDG OAT HAY BALE
1 SMARTPOINT®
LOCATION
HORN
INTRODUCTION
Thank you for purchasing the VTech®Go! Go! Smart AnimalsTM Farm
& Learn Animal WagonTM playset!
Explore the Go! Go! Smart AnimalsTM Farm & Learn Animal WagonTM
playset by VTech®. Learn about animals, colors and more with the
SmartPoint®goat. Launch the goat and kid down the slide and through
the wagon. For added fun, you can connect this playset to other Go!
Go! Smart AnimalsTM and Go! Go! Smart Wheels®playsets (each
sold separately).
Introduction

3
INCLUDED IN THIS PACKAGE
Included In This Package
One Kid One Vehicle
One Animal Wagon
One SmartPoint®Goat
One User’s Manual
One Label Sheet
One Hay BaleOne Horn
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
Unlock the packaging locks:
Turn the packaging lock counter-clockwise
several times.
Pull out and discard the packaging lock.

4
GETTING STARTED
BATTERY INSTALLATION – GOAT
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the goat. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new “AAA” (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started

5
Please adhere the labels to the playset
securely as indicated below:
Label Instructions

6
ASSEMBLY INSTRUCTIONS
With the VTech®Go! Go! Smart AnimalsTM Farm & Learn Animal
WagonTM playset, safety comes first. To ensure your child’s safety,
adultassemblyisrequired.
1. Attach the horn to the vehicle as
shown. You will hear a “click” sound
to indicate the horn is secure.
PRODUCT FEATURES – GOAT
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH on the unit to the ON ( )
position. To turn the unit OFF, slide
the ON/OFF SWITCH to the OFF
( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Go! Go! Smart AnimalsTM
Goat will automatically power-down after approximately 30 seconds
without input.The unit only can be turned on again by pressing the
light-upbuttonorpushingthegoatquickly.
Note: This product is in a try-me mode in the packaging. After opening
the package, turn the animal off and on again to proceed with
normal play.
Assembly Instructions/Product Features

7
ACTIVITIES - GOAT
1. Slide the ON/OFF SWITCH to the
ON position to turn the unit on. You
will hear a goat sound, a song and
a phrase. The light will flash with the
sounds.
2. Press the LIGHT-UP BUTTON to
hear fun sounds, sing-along songs
and phrases. The light will flash with
the sounds.
3. Push the goat to hear fun sounds
and melodies. While a melody is
playing, push the goat again to add
in fun sounds on top of the melody.
The light will flash with the sounds.
4. Press the goat’s nose to hear
nurturing phrases about her baby.
Activities

8
5. The kid can be attached to the
mother goat. Simply unfold the snap
ring from under the kid and insert the
snap ring into the holes on the back
of the goat. To remove the kid, pull
gently on the snap ring.
6. For added fun, the goat interacts
with all VTech®Go! Go! Smart
AnimalsTM playsets (each sold
separately). Simply roll the goat over
one of the playset’s SmartPoint®
locations to see the light flash and
to hear greetings, fun sounds, short
tunes and sing-along songs.You can
also play with your animal on Go!
Go! Smart Wheels®playsets (each
sold separately).
ACTIVITIES - VEHICLE & WAGON
1. Tap the horn to hear fun sounds.
2. Roll the windshield to change drivers.
Activities

9
3. Flip the window to see the driver
inside.
4. Turn the chimney for mechanical fun.
5. Attach the wagon to the vehicle by
placing the ring on the wagon over
the post on the back of the vehicle.
6. Place the goat on the LAUNCHER
inside the wagon. Lift up the
LAUNCHER to send the goat down
the slide.
7. Fold the launcher inside the wagon
and flip up the slide so that the wagon
can roll smoothly.
Activities

10
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2.
Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
pleasefollowthesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit sit for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech®at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada.
Care & Maintenance/Troubleshooting

11
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Note:
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment
generates,usesandcanradiateradiofrequencyenergyand,ifnot
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
thisequipmentdoescauseharmfulinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffand
on, the user is encouraged to try to correct the interference by one or
moreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operatetheequipment.
Other Info

12
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Other Info