V-tech Ultimate Alphabet Activity Cube Assembly Instructions

Ultimate Alphabet
Activity CubeTM
91-003361-000
Parent’s Guide

2
INTRODUCTION
Thank you for purchasing the VTech®Ultimate Alphabet Activity
CubeTM.This cube has five interactive sides and includes13 double-
sided letter blocks. Insert the letter blocks into the letter recognition
slot and the cube will show the letter on the LED screen and introduce
it. Drop the blocks down the chute to hear them counted, or stack the
letter blocks on the top of the cube. Other sides feature animals to
slide or flip, block sorter slots, gears and more.
On/Off/Mode
Switch
Letter
Recognition
Slot
Block Chute
Sliding Bear
13 Double-Sided
Letter Blocks
Number/Animal
Buttons
Beads
Light-Up
Screen
Peg Maze
Volume Control
Switch

3
INCLUDED IN THIS PACKAGE
• One sheet of labels
• One parent’s guide
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks, removable tags, cable ties and
packaging screws are not part of this toy, and
should be discarded for your child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches, étiquettes
et vis d’emballage. Ils ne font pas partie du jouet.
NOTE: Please keep this parent’s guide as it contains
important information.
• One Ultimate Alphabet
Activity CubeTM
• Two bead tracks
• 13 double-sided letter blocks

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the electronic panel. Use a screwdriver
to loosen the screw.
3. Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

5
Please adhere the labels to the cube securely as
indicated below:

6
ASSEMBLY INSTRUCTIONS
To attach the bead tracks to the top of the cube, insert the ends of
the bead tracks into the slots on the top of the cube. You will hear the
bead tracks click into place. Once the bead tracks are inserted they
cannot be removed.
With the Ultimate Alphabet Activity CubeTM, safety comes first. To
ensure your child’s safety, adult assembly is required.
Warning:
Please cut and discard the cord with the warning card and the cord
that attaches the letter blocks to the cube before playing with the cube.
The cords and card are not part of this toy and should be discarded for
your child’s safety.

7
PRODUCT FEATURES
1. On/Off/Mode Switch
To turn the unit ON, slide the On/Off/
Mode Switch to Learning Mode ()
to hear a sing-along song, a phrase and
a sound or slide the switch to Explore
Mode ( ) to hear a short tune, a phrase
and a sing-along song. To turn the unit
OFF, slide the On/Off/Mode Switch to
the OFF ( ) position.
2. Volume Control Switch
To adjust the volume, slide the Volume
Control Switch to the Low Volume
( ) or High Volume ( ) position.
3. Automatic Shut Off
To preserve battery life, the Ultimate Alphabet Activity CubeTM will
automatically power down after approximately one minute without
input. The unit can be turned on again by pressing any button,
inserting a block into the letter recognition slot, dropping a block
into the block chute or sliding the bear character.
NOTE: If the unit powers down while playing, we suggest changing
the batteries.

8
ACTIVITIES
1. Letter Recognition Slot
Insert the Letter Blocks into the Letter
Recognition Slot to learn letters and
hear fun sounds and short tunes in
Learning Mode. Learn about letters
and objects, answer simple questions
and hear fun sounds and short tunes in
Explore Mode. The light-up screen will
show fun animations.
2. Number/Animal Buttons
Press the Number/Animal Buttons to
learn numbers, shapes, colors and animals
in Learning Mode. In Explore Mode you will
hear animal sounds and music, and can
answer simple questions. The light-up
screen will show fun animations.
3. Block Chute
Drop the Letter Blocks into the Block
Chute to hear the blocks counted
in Learning Mode and hear music in
Explore Mode. The light-up screen will
show fun animations.
4. Sliding Bear
Move the Sliding Bear to hear playful
phrases, songs and simple questions
in Learning Mode, and hear fun sounds
and music in Explore Mode. The light-up
screen will show fun animations.

9
5. Letter Blocks
Stack and build with the Letter Blocks
on the building surface, or tap the
building surface to hear fun sounds
in Learning Mode and hear music in
Explore Mode. The light-up screen will
show fun animations.
SONG LYRICS
SONG 1
Drop a block into my chute,
Or build up a tower on top of me.
MELODY LIST
1. Three Little Kittens
2. BINGO
3. Down by the Riverside
4. Froggy Went a Courtin’
5. All the Pretty Little Horses
6. Hey Diddle Diddle
7. Baa, Baa, Black Sheep
8. Aiken Drum
9. Hickory, Dickory, Dock
10. Skip to My Lou
11. Teddy Bears’ Picnic
12. Ring Around the Rosy
13. Here We Go Round the Mulberry Bush
14. Bear Went Over the Mountain
15. Pop! Goes the Weasel

10
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and filling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.