V-tech Learning Fun Tool Box User manual

© 2010 VTech
Printed in China
91-113100-000-006
User’s Manual
Learning Fun Tool BoxTM

3
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Learning Fun Tool BoxTM
learning toy!
Learning meets role play for hours of fun! Interactive tool box features
four play tools. Use the screwdriver to turn gears, use the wrench to
turn bolts, use the hammer to tap nails and pretend to saw a piece of
wood – use your tools to learn!
Two Nails
Screwdriver
Hammer
Three Turning Gears
Off/Mode Selector Switch
Sliding Saw
Two Bolts
Three Shape
Buttons
Wrench

4
INCLUDED IN THIS PACKAGE
- One VTech®Learning Fun Tool BoxTM
- Four play tools: hammer, screwdriver, wrench, saw
- One user’s manual
WARNING: All packing materials, such as tape, plastic
sheets, wire ties and tags are not part of this
toy, and should be discarded for your child’s
safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a coin or a screwdriver
to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the
battery box. The use of new alkaline
batteries is recommended for maximum
performance.
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance;
• Non-rechargeable batteries are not to be recharged.
Getting Started

5
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium)
• Only batteries of the same or equivalent type as recommended are
to be used;
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in fire.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
PRODUCT FEATURES
1. OFF/MODE SELECTOR
SWITCH
To turn the unit ON, slide the OFF/
MODE SELECTOR SWITCH to the
LEARNING MODE ( ) or the PLAY
MODE ( ) position. To turn the unit
OFF, slide the OFF/MODE SELECTOR
SWITCH to the OFF ( ) position.
Product Features

6
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Learning Fun Tool BoxTM will
automatically power-down after approximately 50 seconds without
input. The unit can be turned on again by pressing any button.
ACTIVITIES
1. Slide the OFF/MODE SELECTOR
switch to turn the unit on. You will
hear a sing-along song, a welcoming
phrase and playful sounds. The lights
will flash with the sounds.
2. Open and close the cover to hear a
variety of phrases and sounds. The
lights will flash with sounds.
3. Press a shape button to learn shapes
and numbers in Learning Mode and
to play a fixing game in Play Mode.
The lights will flash with sounds.
4. Tap the nails to count numbers 1 to
10 in Learning Mode and to hear
fun phrases and great sounds in
Play Mode. The lights will flash with
sounds.
Activities

7
5. Turn the bolts to learn colors in
Learning Mode and to hear playful
sounds in Play Mode. The lights will
flash with sounds.
6. Turn the gears to hear playful sounds
and upbeat music. The lights will flash
with sounds.
7. Slide the saw on the wood to hear
playful sounds and upbeat music. The
lights will flash with sounds.
MELODY LIST:
1. I’ve Been Working on the Railroad
2. Little Jack Horner
3. Pop! Goes the Weasel
4. Row, Row, Row Your Boat
5. Take Me Out to the Ball Game
6. Alphabet Song
7. Jack Be Nimble
Activities

8
SUNG SONG LYRICS
One, two, three,
Play with me!
With our tools we’ll be happy.
With a tap of the hammer and a turn of the screw,
There’s so much that we can do!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
Care & Maintenance

9
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call our Consumer
Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697
in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is
accompanied by a responsibility that we at VTech®take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know
that we stand behind our products and encourage you to call
our Consumer Services Department at 1-800-521-2010 in the
U.S., or 1-877-352-8697 in Canada, with any problems and/or
suggestions that you might have. A service representative will
be happy to help you.
FCC Notice:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Other Info

10
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME
À LA NORME NMB-003 DU CANADA.
Other Info