V-tech Go! Go! Smart Animals Zoo Explorers Playset User manual

User’s Manual
© 2014 VTech
Printed in China
91-002926-008 US
Zoo Explorers PlaysetTM

3
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Go! Go! Smart Animals™Zoo
Explorers Playset™ learning toy!
Go on a trip with the Go! Go! Smart Animals™ Zoo Explorers
Playset™ by VTech®. Explore and learn about animals, colors and
more with the SmartPoint™ rhino and electronic zoo. You can also
connect it to other playsets including Go! Go! Smart Wheels®for
even more fun!
RHINO
POLAR ZONE7 SMARTPOINT™
LOCATIONS
WATER TANK
ELECTRONIC
ZOO ENTRANCE
MOUNTAIN AND
ROCKY PATH

4
Included In This Package
INCLUDED IN THIS PACKAGE
• Oneuser’smanual
• Onesheetoflabels
• OneVTech®Go! Go! Smart Animals™ rhino
• Oneelectroniczooentrance
• Twozooentrancepillars
• OneSmartPoint™ resting area
• OneSmartPoint™ zoo entrance track
• OneSmartPoint™ polar zone ramp
• Oneippingboard
• Onepolarzonesupportpiece
• Onepenguin
• Oneigloo
• OneSmartPoint™ mountain
• Onemountaintop
• Oneelevatorinserttrack

5
• OneSmartPoint™ elevator
• Onerockypathgate
• Onerockypathspiralramp
• Twomountainsupportpieces
• Mountaintopaccessorypiece
• Onewatertank
• Onewatertankgate
• Onewatertankramp
• OneSmartPoint™ water tank exit ramp
• Threeshorttracks
• Three90degreetracks
• OnestraightSmartPoint™ track
• Onecrosstrack
• Onecurvedpieceforthecrosstrack(changesdirection)
Included In This Package

6
Please adhere the labels to the playset securely as
indicated below:
Label Instructions

7
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy,
and should be discarded for your child’s safety.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-
vous de tous les produits d’emballage tels que
rubans adhésifs, feuilles de plastique, attaches et
étiquettes. Ils ne font pas partie du jouet.
NOTE: Please keep user’s manual as it contains important
information.
ASSEMBLY INSTRUCTIONS
With the VTech®Go! Go! Smart Animals™Zoo Explorers
Playset™,safetycomesrst.Toensureyourchild’ssafety,adult
assembly is required.
Electronic Zoo Entrance
1. Insert the two zoo entrance pillars into the electronic zoo entrance.
You will hear a slight “click” sound to indicate the pillars are secure.
2. Attach the SmartPoint™ zoo entrance track to the two zoo entrance
pillars. You will hear a “click” sound to indicate the track is secure.
3. Attach the SmartPoint™ resting area to the zoo entrance pillar with
the ticket booth. You will hear a “click” sound to indicate the piece
is secure.
Assembly Instructions

8
Polar Zone
1. Insert the polar zone support piece into the bottom of the
SmartPoint™ polar zone ramp.
2. InserttheippingboardintotheSmartPoint™ polar zone ramp.
3. Locate the short track piece that has a hinged slide. Insert the hinged
end into the holes that are located towards the bottom of the polar
zone ramp.
Mountain and Rocky Path
1. Attach the mountaintop to the SmartPoint™ mountain. You will
hear a “click” sound to indicate the pieces are secure.
2. Insert the SmartPoint™ mountain support piece into the bottom of
the mountain.
3. Slide the narrow strip of the elevator insert track into the slot on the
side of the mountain starting at the bottom as shown in the picture.
4. Attach the SmartPoint™ elevator to the elevator insert track.
5. Attach the rocky path spiral ramp to the mountain.
6. Insert the rocky path spiral ramp support piece into the bottom of
the rocky path spiral ramp.
7. Insert the mountaintop accessory piece and the rocky path gate
into the rocky path spiral ramp.
Assembly Instructions

9
Water Tank
1. Attach the SmartPoint™ water tank exit ramp and the ramp to the
water tank.
2. Attach the water tank gate to the water tank.
3. Attach the fully assembled water tank to the rocky path spiral ramp
as shown.
After the above steps, connect these pieces to the included track pieces.
Youcancongurethemintodifferentarrangements.
GETTING STARTED
BATTERY INSTALLATION - Rhino
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the rhino. Use a coin or a screwdriver to
loosen the screw.
3. Install2new‘AAA’(AM-4/LR03)batteriesfollowingthediagram
inside the battery box. (The use of new alkaline batteries is
recommendedformaximumperformance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
Assembly Instructions / Getting Started

10
BATTERY INSTALLATION - Zoo Entrance
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the zoo entrance. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AAA’ (AM-4/LR03)
batteries following the diagram inside
thebatterybox.(Theuseofnewalkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started

11
Rhino Product Features / Activities
PRODUCT FEATURES - Rhino
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH to the ON( )position.To
turn the unit OFF, slide the ON/OFF
SWITCH to the OFF( )position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Go! Go! Smart Animals™
rhino will automatically power-down after approximately 60 seconds
without input. The unit only can be turned on again by pressing the
light-up button or pushing the rhino quickly.
ACTIVITIES - Rhino
1. Slide the ON/OFF SWITCH to the ON
( )positiontoturntheuniton.You
will hear a rhino sound, a song and
a phrase. The light will ash with the
sounds.
2. Press the LIGHT-UP BUTTON to hear
fun sounds, sing-along songs and
phrases. The light will ash with the
sounds.
3. Push the rhino to hear fun sounds and
melodies. While a melody is playing,
push the rhino again to add in fun
sounds on top of the melody. The light
willashwiththesounds.

12
4. For added fun, the rhino interacts with
VTech®Go! Go! Smart Animals™
playsets(eachsoldseparately).Simply
rolltherhinooveroneoftheplayset’s
SmartPoint™ locations to see the light
ashandtoheargreetings,funsounds,
short tunes and sing-along songs. You
can also play with your animal on Go!
Go! Smart Wheels® playsets (each
soldseparately).
PRODUCT FEATURES – Electronic
Zoo Entrance
1. OFF/EXPLORER MODE/MUSIC MODE SWITCH
To turn the unit ON, slide the OFF/
EXPLORER MODE/MUSIC MODE
SWITCH to the Explorer Mode( )or
the Music Mode( )position.Toturn
the unit OFF, slide the OFF/EXPLORER
MODE/MUSIC MODE SWITCH to the
OFF( )position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Go! Go! Smart Animals™
electronic zoo entrance will automatically power-down after
approximately 30 seconds without input. The unit only can be
turned on again by pressing any one of the three animal buttons or
activatingtheippingboard.
Electronic Zoo Entrance Product Features

13
ACTIVITIES– Electronic Zoo Entrance
1. Slide the OFF/EXPLORER MODE/
MUSIC MODE SWITCH to the Explorer
Mode or Music Mode position to turn
the unit ON. You will hear a song and a
greetingphrase.Thelightwillashwith
the sounds.
2. Press the three ANIMAL BUTTONS
to hear phrases, songs, melodies and
otherfunsounds.Thelightwillashwith
the sounds.
3. Push the rhino through the zoo entrance
to activate the WELCOME SIGN to hear
fun sounds and short tunes. The light
willashwiththesounds.
4. If there is no input after approximately 8 seconds, you will hear a
short tune and an invitation to play. After another 8 seconds of no
input, the unit will play a short tune and then go into sleep mode.
The unit can be reactivated by any input.
Electronic Zoo Entrance Activities

14
SING-ALONG SONG 1 LYRICS
Welcome to the zoo!
There’ssomuchtolearnanddo!
SING-ALONG SONG 2 LYRICS
The zoo is fun,
Sing a song and say hello to everyone!
SING-ALONG SONG 3 LYRICS
The happy, happy penguin loves waddling,
Back and forth,
With his friends.
SING-ALONG SONG 4 LYRICS
The giraffe reaches high up in the trees,
Looking to munch on some leaves.
SING-ALONG SONG 5 LYRICS
The little, little sweet turtle,
Swims happily in the pond.
Melody List
1. Polly Put the Kettle On
2. When the Saints Go Marching In
3. One Two, Buckle My Shoe
4.MufnMan
5. The Fountain in the Park
6. Cancan
7. Hickory, Dickory Dock
8. I've Been Working on the Railroad
9. Row, Row, Row Your Boat
10 Ring Around a Rosie
11. Sailing, Sailing
12. Aiken Drum
Sing-Along Songs & Melody List

15
ACTIVITES – Zoo
1. Lift the rhino up to the top of the
mountain using the ELEVATOR.
2. Change the direction of the rocky path
byippingtheGATE.
3. Move the sliding turtle on the WATER
TANK to help the rhino take a swim.
4. Move the rhino or any SmartPoint™
animal(eachsoldseparately)overthe
zoo’ssevenSmartPoint™ locations to
trigger fun sounds, songs, or phrases.
Zoo Activities

16
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
Ifforsomereasontheprogram/activitystopsworking,pleasefollow
thesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada with
anyproblemsand/orsuggestionsthatyoumighthave.Aservice
representative will be happy to help you.
Care & Maintenance / Troubleshooting

17
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
moreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Caution: Changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Other Info

18
Other Info