V-tech Pull & Play Phone User manual

© 2009 VTech
Printed in China
Pull & Play Phone™
91-001506-020-000

2
INTRODUCTION
Your toddler will be dialin’ and smilin’ while learning numbers and counting
with the VTech®Pull & Play Phone™! Press the light-up phone button
and up pops the puppy. Packed with realistic phone sound effects and
friendly phrases, this pull-along toy will encourage little ones to put you
“on hold” for hours. What’s more, your child can play in English or Spanish
for twice the learning!
INCLUDED IN THIS PACKAGE
- One VTech®Pull & Play Phone™ learning toy
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
POP-UP PUPPY
NUMBER BUTTONS
PULL CORD
HANDSET
LIGHT-UP PHONE
BUTTON
OFF/LANGUAGE
SELECTOR SWITCH
Introduction

3
Demo strip removal:
When the product is taken out of the packaging, please remove the demo
strip from the unit to activate normal play mode.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a coin or screwdriver to loosen the
screw.
3. Install 2 new “AA” (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are
to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
Getting Started

4
PRODUCT FEATURES
1. To turn the unit ON, slide the OFF/
LANGUAGE SELECTOR SWITCH to
the English (ENG) or Spanish (ESP)
position. To turn the unit OFF, slide
the OFF/LANGUAGE SELECTOR
SWITCH to the OFF position.
2. Slide the MODE SELECTOR SWITCH
on the bottom of the unit to the TALKING
MODE ( ) or MELODY MODE ( )
position.
3. To use the phone as a pull toy,
remove the pull cord from the battery
compartment and thread it through
the eyelet on the bottom of the phone.
We suggest you store the pull string
in the compartment until your child is
walking.
4. If there is no input to the phone after
10 seconds, you will hear a ringing
sound effect followed by “Help me call
my friends!” If there is no input after
another 10 seconds, you will hear “See
you soon!” and a hang up sound effect,
then the unit will power-down. The unit
can be turned on again by pressing
any button or by rolling the phone.
Product Features

5
ACTIVITIES
TALKING MODE
1. Slide the MODE SELECTOR
SWITCH to the TALKING MODE
( ) position. You will hear a dialing
and a ringing sound effect followed
by “Hello!” The light will flash with all
the sounds.
2. Press the NUMBER BUTTONS to
hear the numbers identified and
the corresponding number of music
notes. After any three number buttons
have been pressed, you will hear one
of two sound effect sequences. The
light will flash with all the sounds.
3. Press the “ ” BUTTON to hear a
dialing and a busy signal sound
effect followed by one of five random
melodies. The light will flash with all
the sounds.
Activities

6
4. Press the “#” BUTTON to hear a
ringing sound effect and “Hello!”
followed by one of five random
melodies. The light will flash with all
the sounds.
5. Press the PHONE BUTTON and see
the puppy pop up. You will hear a
ringing sound effect or “It’s for you!”
and a laughing sound effect. The
light will flash with all the sounds.
6. Press the puppy back into the phone
to hear “See you soon!” and a hang
up sound effect. The light will flash
with all the sounds.
7. Pull or push the phone when the puppy
is popped up to hear a sung song or a
random phrase and a random sound
effect. If the puppy is hiding in the
phone, you will hear a random sound
effect or a sung song. The light will
flash with all the sounds.
Activities

7
MELODY MODE
1. Slide the MODE SELECTOR SWTICH
to the MELODY MODE ( ) position.
You will hear “Let's make a silly song!”
followed by a short tune. The light will
flash with all the sounds.
2. Press the NUMBER BUTTONS to
hear a random sound effect followed
by a pre-programmed melody. The
light will flash with all the sounds.
3. Press the “ ” BUTTON to hear a
dialing and a busy signal sound
effect followed by one of five random
melodies. The light will flash with all
the sounds.
4. Press the “#” BUTTON to hear a
ringing sound effect and “Hello,is that
you?” followed by one of five random
melodies. The light will flash with all
the sounds.
Activities

8
5. Press the PHONE BUTTON and see
the puppy pop up. You will hear a
ringing sound effect or “It’s for you!”
followed by a sung song. The light
will flash with all the sounds.
6. Press the puppy back into the
phone to hear "See you soon!" and
a random melody. The light will flash
with all the sounds.
7. Pull or push the phone when the
puppy is popped up to hear a sung
song or a random melody. If the
puppy is hiding in the phone you will
hear a random melody. The light will
flash with all the sounds.
SUNG SONG LYRICS:
The buttons on the phone go beep, beep, beep
Beep, beep, beep; Beep, beep, beep
The buttons on the phone go beep, beep, beep
When you call your friends
Activities

9
MELODY LIST:
1. B-I-N-G-O
2. Baa Baa Black Sheep
3. Three Blind Mice
4. Three Little Kittens
5. Turkey in the Straw
6. Farmer in the Dell
7. Old Grey Mare
8. Glow Worm
9. On Top of Old Smokey
10. Teddy Bears’ Picnic
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
Care & Maintenance