V-tech Sit-to-Stand Dancing Tower User manual

TM
74900manual.indd 1 3/15/07 9:23:50 AM

Dear Parent:
Ever notice the look on your baby’s face when they learn something
new through their own discovery? These self-accomplished moments
are a parent’s greatest reward. To help fulfill them, VTech
®
created
the Infant Learning series of toys.
These unique interactive learning toys directly respond to what
children do naturally – play! Using innovative technology, these
toys react to baby’s interactions, making each play experience fun
and unique as they learn age-appropriate concepts like first words,
numbers, shapes, colors and music. More importantly, VTech
®
’s
Infant Learning toys develop baby’s mental and physical abilities
by inspiring, engaging and teaching.
At VTech
®
,we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the best
of their ability.We thank you for trusting VTech
®
with the important
job of helping your child learn and grow!
Sincerely,
Your Friends at VTech
®
To learn more about Infant Learning and otherVTech
®
toys, visit
www.vtechkids.com
74900manual.indd 2 3/15/07 9:23:50 AM

2
INTRODUCTION
Thank you for purchasing the VTech®Sit-to-Stand Dancing Tower™
learning toy.
The Sit-to-Stand Dancing Tower™ is part of the Sit-to-Stand™ series
of toys developed to grow with baby. The fun-packed activity panel
includes 5 light-up piano keys that teach animals, colors, instruments
and styles of music. The rotating microphone encourages baby to sing
along. The dancing bear captures baby’s attention by moving to the
music. The panel can be used alone for oor play, or add the trunk pieces
at two different levels as baby grows. The toy is also motion-activated
to encourage dancing and play.
Introduction
MODE SELECTOR
SWITCH
DANCING BEARTURNING ROLLER
MICROPHONE
TOP TRUNK
BOTTOM
TRUNK
ON/OFF/VOLUME
CONTROL SWITCH
2 DANCING
PLATFORMS
LIGHT-UP
PIANO KEYS
SLIDING
CYMBALS
2 BASE PIECES
74900manual.indd 2 3/15/07 9:23:52 AM

33
INCLUDED IN THIS PACKAGE
- One dancing bear - One electronic activity panel
- Two connecting trunk pieces - Two halves of one base
- Three screws ( 0.138 x 0.63 Inch ) - Two dancing platforms
- One user’s manual
Included in This Package
74900manual.indd 3 3/15/07 9:23:56 AM

4
WARNING: All packing materials, such as tape, plastic sheets, wire
ties, tags and try-me cable are not part of this toy, and
should be discarded for your child’s safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the activity panel. Use a
coin or a screwdriver to loosen the
screw.
3. Install 4 new ‘AA’ (UM-3/LR6)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in re.
Getting Started
74900manual.indd 4 3/15/07 9:23:56 AM

5
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended
are to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
With the VTech
®
Sit-to-Stand Dancing Tower™, safety comes rst.
To ensure your child’s safety, please only assemble this product by
an adult. Please ensure that the base, top and bottom trunk pieces,
dancing platforms, dancing bear and activity panel are securely
locked into position to avoid injury. For best results in Standing
Play position, place the toy on carpet, a rug or a mat.
The activity panel can be used alone for oor play (9+ months), with
the base and top trunk piece for sitting play (12+ months) or with the
base and both the top and bottom trunk pieces for standing play (18+
months).
Getting Started
Floor Play Sitting Play Standing Play
(9+ months) (12+ months) (18+ months)
74900manual.indd 5 3/15/07 9:24:00 AM

6
Please remove and discard the try-me
cable between the dancing bear and the
activity panel before assembly.
ASSEMBLY INSTRUCTIONS
1. Place the two base pieces on the
oor. Align them with the left half
above the right half, then push down
to lock them together until you hear
a click.
Use a screwdriver to fasten the three
screws into the holes on the back of
the base to securely fasten the base
pieces together.
2. Insert the two dancing platforms into
the base by rst inserting the small
rods on one side of the platforms
into the corresponding holes on the
base. Then, line up the tags on the
top edges of the dancing platforms to
the corresponding slots in the base.
Slide the tags into the slots while at
Assembly Instructions
74900manual.indd 6 3/15/07 9:24:03 AM

7
the same time inserting the opposite
rods into the base.
3. Attach the trunk to the base by lining
it up over the hole in the center of
the base. Turn the trunk clockwise
until you hear a click. The trunk can
be separated into two parts. Remove
the top trunk piece from the bottom
trunk piece by pushing the button
on the bottom piece, then turning
the top piece counterclockwise one
revolution.
For sitting play, the top trunk piece
can be tted to the base in the same
way described above.
4. Attach the dancing bear to the
activity panel by placing the dancing
bear into the center of the activity
panel. Press gently while turning
the dancing bear until you hear it
click into place. Please ensure the
dancing bear is attached securely to
the activity panel. Once the dancing
bear has been attached, it cannot be
removed again.
Assembly Instructions
74900manual.indd 7 3/15/07 9:24:05 AM

8
Attaching/Removing the Activity Panel
1. To attach the activity panel, pull the
release locks located on the bottom
of the activity panel away from the
center. Insert the bottom of the panel
into the trunk, then release the locks.
Please ensure the activity panel is
attached securely to the trunk. While
attached to the trunk, the activity
panel can be turned slightly during
play.
2. To remove the activity panel, pull the
release locks located on the bottom
of the activity panel away from the
center. Pull the activity panel away
from the trunk.
Changing Sit/Stand Position
1. Remove the activity panel from the
trunk as directed above.
Assembly Instructions
74900manual.indd 8 3/15/07 9:24:07 AM

9
2. Remove the top trunk piece from
the bottom trunk piece by pushing
the button on the bottom piece, then
turning the top piece counterclockwise
one revolution.
3. Remove the bottom trunk piece from
the base by pulling back the release
tab on the base.
Assembly Instructions
74900manual.indd 9 3/15/07 9:24:08 AM