V-tech Switch & Go Dash the T-Rex Assembly Instructions

91-003281-010 UK
Parent’s Guide
Dash the T-Rex

2
INTRODUCTION
The king is back! Introducing, Dash the T-Rex. At the push of a
button, you can automatically switch Dash between a cool racer
and a fearsome T-Rex! Use the FORWARD/REVERSE BUTTON
and the STEERING WHEEL on the remote control to control Dash’s
every move! Let’s go and show everyone why the Dash is the king of
the dinosaurs!
OFF/CHANNEL
SWITCH
STEERING WHEEL
INDICATOR LIGHT
ACTION BUTTON
HEADLIGHT BUTTON
SWITCH BUTTON
TALK BUTTON
VOLUME BUTTON
STYLE BUTTON
SOUND EFFECT
BUTTON
FORWARD/REVERSE
BUTTON

3
TALK BUTTON
(Hold down for a few seconds
to turn the unit OFF)
SOUND EFFECT
BUTTON
(Hold down for a few seconds
to turn the unit OFF)
SWITCH BUTTON
OFF/CHANNEL
SWITCH
ALIGNMENT
DIAL
LCD SCREEN
LIGHTS
LIGHTS

4
INCLUDED IN THIS PACKAGE
• One Dash the T-Rex
• One remote control
• Parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of
this toy, and should be discarded for your child’s safety
NOTE:
Please keep this parent’s guide as it contains important information.
IMPORTANT NOTE:
1. For optimal performance, please use Dash the T-Rexonaat,
smooth surface.
2. When exposed to electrostatic discharge and radio interference,
Dash the T-Rex may malfunction. Please turn both Dash and the
remote control off and on again to reset them.
3. For your child’s safety, do not put Dash the T-Rex in either
congurationonyourclothing,bodyorhair.

5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure that Dash and the remote
control are turned OFF.
2. Locate the battery covers on the top of
Dash (see next page for details) and
on the back of the remote control. Use a
screwdriver to loosen the screws.
3. First, install 6 new AA (LR6/AM-3)
batteries following the diagram inside
the battery box of Dash. Then, install 2
new AA (LR6/AM-3) batteries following
the diagram inside the battery box of the
remote control. (The use of new alkaline
batteries is recommended for maximum
performance).
4. Put the battery covers back on Dash and the remote control. For
Dash,youwillneedtopressdownrmlyonthecovertocloseit,
then tighten the screw.
NOTE: When the batteries run low on power, Dash may no longer
respond. If this happens, please replace the batteries with brand
new ones.

6
REMOVING THE BATTERY COVER FROM DASH
1. In vehicle mode, lift up Dash’s tail.
2. Loosen the screw as illustrated.
4. Install 6 new AA (LR6/AM-3)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance).
3. Lift up the blue rear wing section to
expose the battery box.

7
BATTERY NOTICE
• UsenewalkalinebatteriesorfullychargedNI-MH(Nickel
Metal-hydride) rechargeable batteries for best performance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-zinc)
or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging 
(if removable).
• Rechargeablebatteriesareonlytobechargedunderadultsupervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specied value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com

8
PRODUCT FEATURES
1. TURNING DASH THE T-REX ON
Slide the REMOTE CONTROL OFF/CHANNEL
SWITCH to the Ior II position to turn the REMOTE
CONTROL ON.
Slide the OFF/CHANNEL SWITCH on Dash the
T-Rex to the same position (Ior II) as the REMOTE
CONTROL. The REMOTE CONTROL and Dash the
T-Rex must be on the same channel (Ior II) to send
and receive signals.
2. INDICATOR LIGHT ON THE REMOTE CONTROL
The INDICATOR LIGHT will illuminate
anytime a button is pressed or the STEERING
WHEEL is turned. The light indicates a signal
is being sent to Dash the T-Rex.
3. SWITCH BUTTON
Press the SWITCH BUTTON on the REMOTE CONTROL or on
Dash the T-Rex to automatically switch Dash the T-Rex from
dino to vehicle or from vehicle to dino.

9
4. FORWARD/REVERSE BUTTON
By pressing the FORWARD/REVERSE
BUTTON on the REMOTE CONTROL up or
down, Dash the T-Rex will move forwards or
backwards.
NOTE:IfDash the T-Rex is not moving straight, use the
ALIGNMENT DIAL to adjust the front wheel alignment.
5. STEERING WHEEL
Turn the STEERING WHEEL on the
REMOTE CONTROL to make Dash the
T-Rex turn left or right.
6. ACTION BUTTON
Press the ACTION BUTTON on the REMOTE
CONTROL to hear Dash the T-Rex make cool
sound effects and to see him stomp and dash.
7. HEADLIGHT BUTTON
Press the HEADLIGHT BUTTON on
the REMOTE CONTROL to see the two
headlights light up and play sound effects.