V-tech Toot-Toot Animals Doggie Playhouse User manual

User’s Manual
© 2016 VTech
Printed in China
91-003149-001 UK
Doggie Playhouse

C
M
Y
CM
MY
CY
CMY
K
Grow with VTech(101x127)bw1P-V2.pdf 1 08/18/2014 9:29:01

3
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Toot-Toot Animals Doggie
Playhouse play set!
Have a howling good time with the Toot-Toot Animals Doggie
Playhouse. Learn about animals and more with the SmartPoint™ dog.
Explore the dog house, ride on the swing and search for buried treasure!
2 Smartpoint™
Locations
Smartpoint™Dog
Swing
Dog House
Dog Bowl
Dog Bone Accessory
Slider Beads

One tree with fence
One swing bracket
One back wall
One dog bone
accessory
One SmartPoint™
Dog
One front wall
One slider with beads
One user’s manual
One SmartPoint™
swing base
One SmartPoint™
base
One roof
Two label sheets
User’s Manual
© 2016 VTech
Printed in China
91-003149-001 UK
Doggie Playhouse
4
Included In This Package
INCLUDED IN THIS PACKAGE

5
Getting Started
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy,
and should be discarded for your child’s safety.
NOTE: Please keep this user’s manual as it contains important
information.
Unlock the packaging locks:
Turn the packaging lock counter-clockwise
several times.
Pull out and discard the packaging lock.
GETTING STARTED
BATTERY INSTALLATION – DOG
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the dog. Use a coin or a screwdriver
to loosen the screw.
3. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure.

6
BATTERY NOTICE
• UsenewalkalinebatteriesorfullychargedNI-MH(NickelMetal-
hydride) rechargeable batteries for best performance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
ThechemicalsymbolsHg,CdorPb,wheremarked,indicate
thatthebatterycontainsmorethanthespeciedvalueof
mercury(Hg),cadmium(Cd)orlead(Pb)setoutinBattery
Directive(2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com
Battery Notice

7
Label Instructions
Please stick the labels to the play set securely as
indicated below:

8
ASSEMBLY INSTRUCTIONS
With the VTech®Toot-Toot Animals Doggie Playhouse,
safetycomesrst.Toensureyourchild’ssafety,adultassembly
isrequired.
1. Attach the FRONT WALL to the
SmartPoint™BASE. Then, attach the
BACK WALL to the SmartPoint™BASE
as shown. You will hear a “click” sound
to indicate each wall is secured to the
SmartPoint™BASE. Once the walls are
connected, they cannot be detached.
2. Attach the ROOF to the top of the dog
house as shown. You will hear a “click”
sound to indicate the ROOF is secure.
Once the ROOF is connected, it cannot
be detached.
3. Insert the SLIDER WITH BEADS into
the ROOF. You will hear a “click” sound
to indicate the SLIDER WITH BEADS is
secure. Once the SLIDER WITH BEADS
is connected to the ROOF, it cannot be
detached.
4. Insert the TREE WITH FENCE into the
SmartPoint™BASE as shown. Once
the TREE WITH FENCE is connected to
the SmartPoint™BASE, it cannot be
detached.
Assembly Instructions

9
5. Insert the SWING BRACKET into the
SmartPoint™SWING BASE. You
will hear a “click” sound to indicate the
SWING BRACKET and SmartPoint™
SWING BASE are secure. Once the
SWING BRACKET and SmartPoint™
SWING BASE are connected, they
cannot be detached.
6. Attach the SWING BRACKET to the
TREE WITH FENCE as shown. You will
hear a “click” sound to indicate the swing
is secure.
Onceyou’vecompletedtheabovesteps,youarereadytoplay!You
can connect these pieces to the other included track pieces or you
can connect this play set to other Toot-Toot Animals play sets (each
sold separately).
EXPAND & EXPLORE
ConnecttotheToot-Toot Animals Deluxe Track Set or other Toot-
Toot Animals play sets (each sold separately) to expand the Doggie
Playhouse and inspire creativity.
Assembly Instructions

10
Product Features
PRODUCT FEATURES – DOG
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH to the ON ( ) position. To turn
the unit OFF, slide the ON/OFF SWITCH
to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Toot-Toot Animals dog will
automatically power-down after approximately 60 seconds without
input. The unit can be turned on again by pressing the light-up
buttonorpushingthedogquickly.
Note: This product is in try-me mode in the packaging. After opening the
package, turn the dog off and on again to proceed with normal
play.
ACTIVITIES – DOG
1. Slide the ON/OFF SWITCH to the ON
( ) position to turn the unit ON. You
will hear a dog sound, a song and a
phrase. The light will ash with the
sounds.
2. Press the LIGHT-UP BUTTON to hear fun
sounds, sing-along songs and phrases.
Thelightwillashwiththesounds.

11
Activities
3. Push the dog to hear fun sounds and
melodies. While a melody is playing, push
the dog again to add fun sounds over
the melody.The light will ash with the
sounds.
4. For added fun, the dog interacts with
VTech®Toot-Toot Animals play sets
(each sold separately). Put the dog
on one of the play set's SmartPointTM
locations to hear fun sounds, short tunes
and sing-along songs and to see the light
ash.Youcanalsoplaywiththedogon
other Toot-Toot Animals play sets (each
sold separately).
ACTIVITIES – DOGGIE PLAYHOUSE
1. Move the dog or any VTech®Toot-Toot
Animals SmartPointTM animal (each
sold separately) over one of the two
SmartPointTM locations to trigger fun
phrases, sounds and music.
2. Place the dog on the swing to trigger a
fun response, and to pretend to play on
the tyre swing.

12
3. Open and close the doggie door to let the
dog in and out of the house. When the dog
is placed in the house, the SmartPointTM
will trigger a fun response.
4. Pull the dog bowl on the side of the house
down when the dog is ready to eat. Push
itbackupwhenheisnished.
5. Lift the bushes and rock pile up and down
tondwhatthedoghashiddenaround
his house.
6. Move the sliding beads back and forth to
pretendthebutteryandbeeareying
around the house.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
Activities/Care & Maintenance

13
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
pleasefollowthesesteps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit still does not work, replace with an entire set of new
batteries.
Iftheproblempersists,pleasecallourConsumerServicesDepartment
on 01235 546810 (from UK) or [phone] (outside UK) and a
service representative will be happy to help you.
TECHNICAL SUPPORT
If you have a problem that cannot be solved by using this manual, we
encourageyoutovisitusonlineor contactourConsumerServices
Department with any problems and/or suggestions that you might have.
A support representative will be happy to assist you.
Beforerequestingsupport,pleasebereadytoprovideorincludethe
informationbelow:
• Thenameofyourproductormodelnumber(themodelnumberis
typically located on the back or bottom of your product).
• Theactualproblemyouareexperiencing.
• Theactionsyoutookrightbeforetheproblemstarted.
Internet: www.vtech.co.uk
Phone: [phone] (from UK), or [phone] (outside UK)
Troubleshooting / Technical Support

14
Note
IMPORTANT NOTE:
Creatinganddeveloping VTech®products is accompanied by a
responsibility that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage
youtocallourConsumerServicesDepartmenton01235546810
(from UK), or [phone] (outside UK), with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.

This warranty is valid for the UK and Eire only. For products purchased outside
the UK and Eire, please contact your local distributor or place of purchase.
Join the VTech club online at www.vtech.co.uk
PRODUCT WARRANTY
9. To keep an online record of your warranty, please register your product
online at www.vtech.co.uk/warranty