V-tech Disney Go!Go! SmartWheels Minnie Mouse Around... Assembly Instructions

Minnie Mouse Around Town Playset
91-003719-000
Parent’s Guide
© Disney
www.disney.com

2
Bow Launcher
Four SmartPoint®Locations
Diner
Flower Shop
SmartPoint®Minnie Mouse Car
INTRODUCTION
Thank you for purchasing the Go! Go! Smart Wheels®
Minnie Mouse Around Town Playset!
Hop into the Car with Minnie Mouse and take a magical ride around
town! Press the bow to launch the car down the spiral ramp. Interactive
SmartPoint®locations activate fun songs, sounds and phrases as your
little one cruises around town with Minnie Mouse!

3
INCLUDED IN THIS PACKAGE
One SmartPoint®
Minnie Mouse Car
One spiral base 1
Two track supports
One flower One flower shop wall
One spiral ramp 2
One diner wall
support
One diner wall
One spiral ramp 3
One flower plate
One top level platform 4
One white fence

4
One bracket 1 Eight screws
●One parent’s guide
One label sheet
One bow launcher
One slide rampOne gate arm
One top house wall
One bracket 2
One arch
One SmartPoint®
launcher track
M/N:80-521800-001-001
P/N:92-010921-000-100
Size:280mm x 220mm
Printing:4C+UV
牙线
注：1. label边缘裁切不能超出红色线框。
2. label 需以牙线为中心对折好来料，印刷面对内。
3. 此label不接受拼版。
牙线
92-010921-000-100
F
l
o
w
e
r
S
h
o
p
F
l
o
w
e
r
S
h
o
p
F
l
o
w
e
r
S
h
o
p
D
I
N
E
R

5
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
Unlock the packaging locks:
Turn the packaging lock counterclockwise
several times.
Pull out and discard the packaging lock.
Adult assembly required.
This package contains small screws. For your child’s safety, do not let
your child play with the toy until it is fully assembled.
CAUTION:
Ce jouet doit être assemblé par un adulte.
Ce jouet contient des petites vis. Pour la sécurité de votre enfant,
ne pas le laisser jouer avec le jouet tant que ce dernier n’est pas
complètement assemblé par un adulte.
ATTENTION :

6
GETTING STARTED
BATTERY INSTALLATION
Car
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the Car. Use a screwdriver
to loosen the screw.
3. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance).
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(if
removable).
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.

7
M/N:80-521800-001-001
P/N:92-010921-000-100
Size: 280mm x 220mm
Printing:4C+UV
牙线
注：1. label边缘裁切不能超出红色线框。
2. label 需以牙线为中心对折好来料，印刷面对内。
3. 此label不接受拼版。
牙线
92-010921-000-100
F
l
o
w
e
r
S
h
o
p
F
l
o
w
e
r
S
h
o
p
F
l
o
w
e
r
S
h
o
p
D
I
N
E
R
LABEL APPLICATION
Please securely stick the labels to the playset as
indicated below:
12
3
4 5
6
7
89
10 11
12 13
14 15
16
18
19
20 21
17
1
3
4
12
19
14
16
2
8 5 67 20 9 11
17 18 13 1510 21

8
ASSEMBLY INSTRUCTIONS
Minnie Mouse Around Town Playset
With the Go! Go! Smart Wheels®Minnie Mouse Around Town
Playset, safety comes first. To ensure your child’s safety, adult
assembly is required.
1. Locate Spiral Base 1 and insert one of the Track Supports, as
shown below.
2. Insert the Flower into the Flower Shop Wall, then insert the
Flower Shop Wall into Spiral Base 1.

9
3. Place Spiral Ramp 2 onto the center pole of Spiral Base 1.
Then, adjust Spiral Ramp 2 so the slots fit snuggly onto the
Flower Shop Wall,Spiral Base 1, and the Track Support,
as shown below.
4. Fasten the Diner Wall Support to the Diner Wall with two Screws,
then insert into the slot on Spiral Base 1, as shown below.
5. Insert Bracket 1 into Spiral Ramp 3 and fasten with three Screws.
6. Insert the Flower Plate into Spiral Ramp 3.You will hear a “click”
sound to indicate the pieces are secure.

10
7. Place Spiral Ramp 3 over the center pole of Spiral Base 2. Then,
adjust Spiral Ramp 3 so that the slots on the bottom fit snuggly
into the Diner Wall and the Flower Shop Wall, as shown below.
You will hear a “click” sound to indicate the pieces are secure.
8. Fasten Bracket 2 to Top Level Platform 4 with three Screws, as
shown below.
9. Insert the Bow Launcher into the Top House Wall, as shown
below.
10. Connect the Top House Wall to Top Level Platform 4. You will
hear a “click” sound to indicate the pieces are secure.