V-tech Toot-Toot Drivers Series User manual

Toot-Toot Drivers®
User’s Manual
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a coin or a screwdriver to loosen the
screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw
to secure.
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
NOTE: Please keep user’s manual as it contains important
information.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on
their respective packaging, indicates they must not be disposed of in
domestic waste as they contain substances that can be damaging to
the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that
the battery contains more than the specified value of mercury (Hg),
cadmium (Cd) or lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market after
13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk www.recyclenow.com
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF SWITCH to
the ON ( ) position. To turn the unit OFF, slide
the ON/OFF SWITCH to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Toot-Toot Drivers®will automatically
power-down after approximately 60 seconds without input.The unit can only be
turned on again by pressing the light-up button or pushing the vehicle quickly.
Note: This product is in a try-me mode in the packaging. After opening the package,
turn the vehicle off and on again to proceed with normal play. If the unit powers down
while playing, we suggest changing the batteries.
ACTIVITIES
1. Slide the ON/OFF SWITCH to turn the unit ON. You
will hear sounds, a song and a phrase. The light will
flash with the sounds.
2. Press the LIGHT UP BUTTON to hear sounds,
songs, phrases and melodies. The light will flash
with the sounds.
12
91-003642-000 UK
Turn the packaging lock anticlockwise
several times.
Pull out and discard the packaging lock.
Unlock the packaging locks:
BATTERY NOTICE
• UsenewalkalinebatteriesorfullychargedNI-MH(NickelMetal-hydride)
rechargeable batteries for best performance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-zinc)or
rechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(ifremovable).
• Rechargeablebatteriesareonlytobechargedunderadultsupervision.

3. Press the GEAR BUTTON ( ) on the
vehicle to activate a mechanical function on the
vehicle and hear fun sounds. The light will flash
with the sounds
4. Push the vehicle to hear fun sounds. While a
melody is playing, push the vehicle again to add
in fun sounds on the top of the melody. The light
will flash with the sounds.
5. For added fun, the vehicle interacts with VTech®
Toot-Toot Drivers®tracks. Simply roll the vehicle
over one of the tracks’ SmartPoints to see the
light flash and to hear greetings, fun sounds,
short tunes and sing-along songs (Tracks sold
separately).
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit is not in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
and a service representative will be happy to help you.
34
CONSUMER SERVICES
Creating and developing VTech products is accompanied by a responsibility
that we at VTech®take very seriously. We make every effort to ensure
the accuracy of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to call our Consumer
Services Department with any problems and/or suggestions that you might
have. A service representative will be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.vtech.com.au
NZCustomers:
Phone: [phone]
Website: support.vtech.com.au
Product Warranty /Consumer Guarantees
UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER
GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees
apply to goods and services supplied by VTech Electronics (Australia) Pty
Limited. Please refer to vtech.com.au/consumerguarantees for further
information.

TM & © 2018 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003642-000
UK
Visit our website for more
information about our products,
downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au