Vacron CDR-E07 Use and care manual

CDR-E07 (720P+VGA)
Firmware update Instruction
1
CDR-E07(720P+VGA)
Firmware update Instruction
1. Please check VACRON Website
http://www.vacron.com.tw/support1.html
2. Remove the firmware to the USB root directory.

CDR-E07 (720P+VGA)
Firmware update Instruction
2
3. Prepare mini USB/USB convert cable. (Not included in standard
package), 4 pings, 3.5 inch headphone jack to RCA output cable,
5V cigarette Power adapter.
mini USB/USB convert cable 4 pings, 3.5 inch headphone
jack to RCA output cable
5V cigarette Power adapter

CDR-E07 (720P+VGA)
Firmware update Instruction
3
4. Connecting the deviceto the USBvia the mini USB/USB
convert cable. Connecting Video out to display or monitor.

CDR-E07 (720P+VGA)
Firmware update Instruction
4
5. Long press Force Record Button  at the same time, and Connect
the USB power .
6. Remove your finger until the display shows “Check Firmware
Version”.

CDR-E07 (720P+VGA)
Firmware update Instruction
5
7. Firmware update will start automatically after firmware version
check.
8. Once firmware update is completed. The display will show normal
split monitor.