Vacron CDR-E07D User manual

2 CH Vehicle Video Recorder
User Manual
2017 MAR V4.0
3G / 4G (Optional)

Vehicle video recorder user manual
ii
Safety Precautions
For ensure device working correctly, please test record and play video
function before use. Please note that manufacturer, subsidiaries,
affiliates, and distributors are not liable for any consequential
damages arising from any malfunction of main device accessory.
Including the losses cause by memory card that failed to record image
or recorded files unable to read on any device.
Before using the product, please ensure that you read the
safety precautions below. And always make sure the product
is used correctly.
•Please keep device away from children.
•Only using the power supply as manufacture recommended.
•Do not attempt to disassemble, alter or heat the product.
•To avoid the risk of injury, do not touch the interior of the product
if it has been dropped or otherwise damaged.
•Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
•Do not use organic solvents such as alcohol, benzene, or thinner
to clean the product.
•Do not let the product come into contact with water (e.g. sea
water) or other liquids.
•Do not allow liquids or foreign objects to enter the VVR.
•Do not place the VVR nearby or direct touch flame.
•Do not handle the power cord with wet hands.
•Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use
the damaged power cords or plugs, or the power cords or plugs
were not fully plugged into the outlet.
•Do not allow direct or metal objects (such as pins or keys) contact
with the terminals or plugs.
•Avoid using, placing or storing the product in the humid or dusty
areas

Vehicle video recorder user manual
iii
Table of Contents
A. Feature................................................................................................................1
B. Specifications.....................................................................................................2
C. Accessories.........................................................................................................3
D. Product structure diagram...............................................................................4
E. Product Dimension............................................................................................5
F. Installation..........................................................................................................6
G. Remote controller..............................................................................................9
H. Recording and stop recording.......................................................................11
I. Playback video records...................................................................................12
J. Format memory card......................................................................................20
K. Restore memory card.....................................................................................22
L. 3G Client Remote Surveillance (optional)....................................................24
M. WiFi real time video........................................................................................32

Vehicle video recorder user manual
1
A. Feature
1. Suitable for record public or private vehicle security video. Apply
vehicles as Taxi, cement trucks, container trucks, tank trucks,
school buses, police cars, armored cars, ambulances, fire trucks,
SUVs, RVs and others.
2. Sony IMX323 Ultra low-light one million high-resolution CMOS
sensor.
3. Built-in Supercapacitor offers extensional power supply and
ensures video is well stored of critical moment and compact.
4. Insert the card and activate power to start recording without
additional operating.
5. Recording vehicle interior and exterior condition simultaneously
6. Complete time, date records that capable displays on the screen
directly.
7. Recording driving condition, sound, G-Sensor and GPS data.
8. Front view angle approx. 120 degrees. Back view angle approx.
130 degrees.
9. Recording track of driving routes which can be shown on Google
Map when we playback video records.
10. Micro SD memory card Class 10 or above recommend.
11. G-sensor sensitivity can be adjusted according to road situations.
When detect a strong shock, system will start emergency
recording and keep the files without being overwritten.
12. Professional file formats, without built-in lithium battery, no needs
to afraid of heat and bursting concerns, it is the real black box.
13. Carry on 3G dongle for remote surveillance, vehicles operating
data can be handling on time.
14. Carry on Wi-Fi dongle for on line video immediately download
and backup.

Vehicle video recorder user manual
2
B. Specifications
Terms Specifications
Sensor
Front 1080P CMOS Sensor
Rear 720P CMOS Sensor
Camera view
angle
Front camera view angle approx.120°
Rear camera view angle approx. 130°
Voltage
(a)Require 5V±5%, 1A Cigarette lighter adapter.
Start voltage as 4.7v above.
(b)Built-in1.5Fsupercapacity as backup power for
file storage.
Operating Temp -15℃~+65℃
Storage device
Recommend using Class 10 above micro-SDHC
Card (8G above) MAX TO 128GB.
Recording
Frame
Front 1920x1080 Max. Fps as 25/25Fps
(NTSC/PAL)
Rear 1280x720 Max. Fps as 15/15fps (NTSC/PAL)
Auto record when power up system; backward
facing lens can be closed by setting of software.
Recording
contents
Date, time, image, sound, G-sensor data, GPS
data.
Storage format
(a)Specific format for software player.
(b)H.264 compression
Microphone
Build-in high sensitivity of single microphone for
automatic voice adjustment
Time setting
GPS auto adjustment, use built in calendar clock
if no GPS signal.
G-Sensor Internal 3D G-Sensor
GPS Built-in GPS, capable connect with G-MOUSE.
GPS position, drive route tracking record.
WIFI Built-in USB WIFI Dongle(2.4G HZ)。
Output/input
device (a)VIDEO OUT: TV-Out (1 Vp-p composite video
output, 75 ohms)
(b)Video Output format: NTSC / PAL alternative.

Vehicle video recorder user manual
3
(c) Force Record Button: For emergency
recording. Gleams in night time.
(d)Red light: Recording indicator. In emergency
recording, it flashes more frequently.
(e)Green light: GPS connecting light (Flashing
light means that 3D positioning is not ready,
bright means that 3D already positioning).
(f) Blue light: WiFi connection light (flash light
means WiFi do not connect, bright means
success connect with WiFi.
(g)EXT: extra GPS Mouse external jack. Note:
under night mode, the infrared ray is on and
the indicator light is dimmed.
C. Accessories
Standard：
(a) 5V cigarette Power adapter
(b) 4 pings, 3.5 inch headphone jack to RCA output cable
(c) IR remote controller
(d) Suction cup for bracket holder
(e) Bracket holder
(f) Product CD
(g) Quick start guide
(h) WiFi Dongle
Optional：
(a) 8G Class10 Above micro SD Card
（8GB/16GB/32BG/64GB/128GB）.
(b) External GPS Mouse (4P Phone Jack Connect) .
(c) Vertical 90˚ glass vehicle models, such as: tour buses, large
trucks, container trucks, fire engines, can be used with AVM-
351 bracket.

Vehicle video recorder user manual
4
D. Product structure diagram
Front camera
Power DC5V
Video output
GPS Mouse
E
xternal
connector
Recording Light /Red
WiFi
connection light/Blue
Force Recording Button
IR LED light
Rear camera
Light Sensor
Remote Control Receiver
GPS
indicator/Green

Vehicle video recorder user manual
5
E. Product Dimension
Unit：mm
USB Jack
/ WiFi Dongle
MICRO SD Card

Vehicle video recorder user manual
6
F. Installation
1. Use「suction cup」or「Double-sided adhesive」install device on vehicle
front windshield.
2. Set up the machine in proper
position
3. Adjust the camera view to proper
angle
4. Plug the power cable to
DC5Vconnect jack
5. Plug in the cigarette adapter.
Double-sided adhesive

Vehicle video recorder user manual
7
6. Device wire installation diagram. During the wire installation,
avoid set wire on left side above GPS, please set wire through
device front hole to vehicle ceiling to get better GPS signal.
Notices
(a) GPS positioning accuracy may be affected by the installation
position, sun-screen or weather condition.
(b) For ensure clarity of video, install device in the wiper washable
area.
(c) Automotive front insulation paper with metal components may
lead to GPS cannot position.
(d) Infrared ray start-up time and off time depends on the light
intensity, which impact by the installation location, first file
cellophane ... and other factors.
(e) The day and night mode with a delay of about 30 seconds, into
the night mode when activate device.
(f) Before using the memory disk, please format the disk first by the
software player. If not, device will automatically erase all data in
the memory disk before recording, then recording as default
setting.
(g) To ensure recording quality, please do not use adapter card with
Micro SD card. Doing so may lead to bad connection due to
shock and vibration
(h) Memory card has life limit.
For ensure it working correctly, please
test the memory card on PC Player regularly
(i) Use new memory card insert device, it will doing professional
files format about 2 minutes, and then start recording.
Best
installation
Location
Adapter
Connection

Vehicle video recorder user manual
8
(j) After SD card format by device or PC player, 8G, 16G, 32G, 64G
or 128G SD card all showing 80.5MB storage space under
Windows system, other storage space as hidden files, user
have to play video records by professional player that offer by
manufacturer. The restore SD card also have to use the
manufacturer player refer to format/restore memory card
chapter.
(k) The collision and high frequency vibration may cause physical
damage to the memory card magnetic field, resulting in video
intermittent or unable playback. it is recommended that regular
inspection and backup important data.
(l) If the device power consumes more than the standard USB
single-hole output 500mA, the computer power supply may be
insufficient, and it requires buying additional DC 5V / 1A above
the power supply wire.
(m)Devices video output normally divided into two systems: NTSC
or PAL. Ensure using suitable system according to different
devices and monitors.

Vehicle video recorder user manual
9
G. Remote controller
Buttons Functions
▲Force recording
button
Manually establish a
recorded file which cannot
be overwritten
Mode
Mode
button Full screen / Half screen spilt shift
Menu Menu
button Firmware version of the device displayed
Mute
button Audio recording On/Off
◆Introduction of OSD Interface: (Video output from connecting
TV-OUT line to the device):
( 1 )Press Mode button in Live view interface switch CH1 front
camera, CH2 rear camera and dual front and rear camera
image as below:
Front camera
image(CH1)
Rear camera
image(CH2)
Front &Rear camera
image display

Vehicle video recorder user manual
10
( 2 )Illustration Description
1. Event Record: Appears in the top right side of LIVE screen,
it means that G-Sensor didn't receive abnormal signal. When you
press the record button from the remote control or click
this icon at the right top to force the machine to record manually.
2. Click Menu button on remote controller under LIVE screen to
display current software version.
3. In the LIVE screen you can choose whether open the
recording or not, click Mute button on remote controller, the icon
will showing on top right of LIVE screen, this icon stand
for stop recording audio, start and being recording the top right
screen will showing icon.
4. GPS display: When icon appears at the top right of the
LIVE screen, it means there is no GPS signal; when the icon
appears in the top right of the LIVE screen, it indicates that the
GPS is working.
* The boot screen and LIVE screen image may change due to software update
or revision without any notice.
Front camera
Rear camera
GPS connection
Audio record On
G-Sensor event
Front camera image (CH1)
Rear camera image (CH2)
GPS dirve information

Vehicle video recorder user manual
11
H. Recording and stop recording
When the device power on, the screen will show a welcome
message for the device starts if connected to TV-Out；After
activated device, software will display current software version as
「Firmware Version：XXXX」before get into LIVE screen.
a) Power on/ Start recording:
Power on, device activated after 1 minute later. The red light flash
indicate device being recording.
Light indicator:
FORCE: force recording button.
REC Red light: Stable flicker of red light: On recording
Fast flicker of red light: Force recording
Wi-Fi Blue light: Blue light stable flicker: Not connect with WIFI,
the blue light stable bright: the WIFI is connecting.
GPS green light: the green light flicker means GPS 3D being
positioning, the green light stable bright mean GPS position
completed.
b) Power Off/ stop recording
Power off and then remove the memory card to read the recording
file in computer.
Recording/Red
WiFi connection/Blue
Force recording button
GPS position/ Green

Vehicle video recorder user manual
12
I. Playback video records
How to read the files from Micro SD card?
Turn the rubber
cover left and
press the Micro
SD card with
your finger to
pop up.
Remove the
card
Insert the Micro
SD card into the
card reader
(please make
sure the
direction is
correct).
Connect the
card reader to
the PC and use
the software in
CD to play the
files.
1. Video playback
Start the program (you can locate it in the CD-R),
Press button, and choose the memory card player list to play
the files.
Note: Direct X 9.0 above is necessary for this program.
2. Main Screen
Viewer interface

Vehicle video recorder user manual
13
Control Interface Description:
Pause
Play
Stop
Play backward
play previous frame
Play next frame
Play previous file
Play next file
Close
Minimal screen
Playback video
Calendar
Backup
Screenshot Tool
Configuration, device setting
Tool list, can format memory card, doing
language setting.
G-sensor
Compass
Free Google map key type in

Vehicle video recorder user manual
14
Disk Backup
Save the recorded files from memory card to your PC, click
the button and it will pop up backup window as below.
Step 1: select the SD card location
Step 2: select the records which require to backup

Vehicle video recorder user manual
15
Step 3. Choose the backup file format
(1)Micro SD Card Backup (*.sd)
(2)AVI File Backup (*.avi)
Backup format：
(1) Micro SD card backup format
Micro SD Card File type (*.sd)
(2)AVI File Backup (*.avi)
Chn01 is the front camera
record. The file name is *.avi.
Chn02 is the rear camera
record. The file name is *.avi.
★Note: If backup by original format of Micro SD card,
the file recorded with location of GPS
(longitude and latitude), speed and G-SENSOR.
If backup by the format of *.avi, the file
recorded date, video and audio. We suggest
to backup by original format of Micro SD card.
Step 4. Backup Path: Select your backup destination (e.g.:
C:\blackbox)
Step 5.Start backup

Vehicle video recorder user manual
16
Setting
Insert memory card into adapter card before recording, and
then plug in adapter card to PC USB slot. Click and run
software to setting recording method, after setting complete,
insert the memory card back to device and continue
recording.
1.
Video
Quality
Select the video quality: High/
Normal / Low
2.
Car
Informatio
n
The license plate number
information can be input here,
the film is easy to identify
which vehicles to record video
record (only English letter and
number acceptable.)

Vehicle video recorder user manual
17
3.
Password
Encrypted memory card for
prevent other people get
any information from this
card. Set a password to 15
characters limited, for
example：
123456789123456
After setting the password,
it is required to enter
password to access the
playback file, setting,
formatting memory card.
★Note: Please confirm the
font case and record the
password to avoid password
forgetting.
4.
Time zone
GMT (GPS automatic time
correction)
5.
Speed
unit
Km/h: kilometer per hour
Mile/h: Mile per hour
Knot: knot per hour
★Note: 1 KM=0.6214 mile,
1 mile=1.6093KM, 1 Knot
=1.853KM
6.
G-sensor
Sensitivity
Set for detect strength of
vehicle collision, and
condition to lead G-sensor
sensitivity trigger force
recording.