Vanderbilt SPC42 Series Instruction sheet

A6V10276959
Vanderbilt
01.05.2016
SPC42xx/43xx/52xx/53xx/63xx
Installation & Configuration
Manual
3.6

Copyright
2
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Copyright
Technical specifications and availability subject to change without notice.
© Copyright Vanderbilt
We reserve all rights in this document and in the subject thereof. By acceptance of
the document the recipient acknowledges these rights and undertakes not to
publish the document nor the subject thereof in full or in part, nor to make them
available to any third party without our prior express written authorization, nor to
use it for any purpose other than for which it was delivered to him.
Edition: 01.05.2016
Document ID: A6V10276959

3
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
Table of contents
1Meaning of symbols.........................................................................................11
2Security .............................................................................................................12
2.1 Target group.......................................................................................................12
2.2 General safety instructions.................................................................................12
2.2.1 General information ............................................................................12
2.2.2 Transport.............................................................................................12
2.2.3 Setup...................................................................................................13
2.2.4 Operation ............................................................................................13
2.2.5 Service and maintenance ...................................................................13
2.3 Meaning of written warning notices....................................................................14
2.4 Meaning of hazard symbols ...............................................................................14
3Directives and standards.................................................................................15
3.1EU directives ......................................................................................................15
3.1.1 Overview of Conformity to EN50131 Standard...................................15
3.1.2 Compliance with EN50131 Approvals ................................................19
3.1.3 Compliance with EN 50136-1:2012 and EN 50136-2:2014................21
3.1.4 Compliance with INCERT Approvals..................................................21
3.1.5 PD 6662:2010 Conformance Guidelines............................................23
3.1.5.1 Product scope.....................................................................................23
3.1.5.2 Standards overview ............................................................................23
3.1.5.3 Methods for the completion of setting and unsetting..........................23
3.1.5.4 Configuration requirements for PD 6662:2010 conformance .............26
3.1.5.5 Additional commissioning requirements for PD 6662:2010
conformance .......................................................................................27
3.1.5.6 Additional information .........................................................................28
3.1.6 Compliance with VDS approvals ........................................................28
3.1.7 Compliance with NF and A2P approvals ............................................29
4Technical Data..................................................................................................31
4.1 SPC4000............................................................................................................31
4.2 SPC5000............................................................................................................32
4.3 SPC6000............................................................................................................35
4.4 SPCP355.300.....................................................................................................38
5Introduction.......................................................................................................39
6Mounting system equipment...........................................................................40
6.1 Mounting a G2 housing......................................................................................40
6.2 Mounting a G3 housing......................................................................................41
6.2.1 Mounting a Back Tamper Kit ..............................................................43
6.2.2 Battery installation for EN50131 compliance......................................47
6.3 Mounting a G5 housing......................................................................................48
6.3.1 Tamper protection...............................................................................50
6.3.2 Mounting the housing with tamper protection.....................................50
6.3.2.1 Tamper operation................................................................................51

4
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
6.3.3 Installing the batteries.........................................................................53
6.4 Mounting a keypad.............................................................................................54
6.5 Mounting an expander........................................................................................54
7Smart PSU.........................................................................................................55
7.1 SPCP355.300 Smart PSU..................................................................................55
7.1.1 Supervised Outputs.............................................................................57
7.1.2 Batteries..............................................................................................58
7.1.2.1 Installing Batteries...............................................................................58
7.1.2.2 Testing Battery Voltage.......................................................................60
7.1.2.3 Deep Discharge Protection.................................................................60
7.1.2.4 Battery Stand-By Times......................................................................60
7.1.3 Wiring the X-BUS Interface.................................................................60
7.1.3.1 Wiring the Inputs.................................................................................61
7.1.3.2 Wiring the Outputs ..............................................................................62
7.1.4 Compliance with NF and A2P approvals ............................................63
7.1.5 PSU LED Status..................................................................................64
7.1.6 System Recovery................................................................................65
8Controller hardware .........................................................................................66
8.1 Controller Hardware 42xx\43xx\53xx\63xx.........................................................66
8.2 Controller Hardware SPC5350 and 6350...........................................................69
9Door Expander..................................................................................................71
10 Wiring the system.............................................................................................72
10.1 Wiring the X-BUS interface ................................................................................72
10.1.1 Loop configuration...............................................................................73
10.1.2 Spur configuration...............................................................................74
10.1.3 Star and multi-drop configuration........................................................75
10.1.3.1 Examples of correct wiring..................................................................78
10.1.3.2 Examples of incorrect wiring...............................................................79
10.1.4 Shielding .............................................................................................80
10.1.5 Cable Map...........................................................................................81
10.2 Wiring of branch expander .................................................................................81
10.3 Wiring the system ground...................................................................................82
10.4 Wiring the relay output........................................................................................82
10.5 Wiring the zone inputs........................................................................................83
10.6 Wiring an external SAB bell................................................................................86
10.7 Wiring an internal sounder .................................................................................87
10.8 Wiring Glassbreak..............................................................................................87
10.9 Installing plug-in modules...................................................................................87
11 Powering up the SPC controller .....................................................................89
11.1 Powering from battery only.................................................................................89
12 Keypad user interface......................................................................................90
12.1 SPCK420/421.....................................................................................................90
12.1.1 Introduction .........................................................................................90
12.1.2 Using the LCD keypad interface.........................................................92
12.1.3 Data entry on the LCD keypad............................................................94

5
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
12.2 SPCK620/623.....................................................................................................95
12.2.1 Introduction .........................................................................................95
12.2.2 LED description...................................................................................98
12.2.3 Viewing mode description...................................................................99
12.2.4 Function keys in idle state...................................................................99
13 Software support tools ..................................................................................101
14 Starting the system........................................................................................102
14.1 Engineer modes ...............................................................................................102
14.1.1 Engineer PINs...................................................................................102
14.2 Programming tools ...........................................................................................103
14.2.1 Fast Programmer..............................................................................103
14.3 Configuring start-up settings ............................................................................103
14.4 Creating system users......................................................................................105
14.5 Programming the portable ACE .......................................................................105
14.6 Configuring wireless fob devices......................................................................106
14.6.1 Clearing alerts using the fob.............................................................107
15 Soft Engineer programming via the keypad................................................109
16 Engineer programming via the keypad........................................................110
16.1 System Status ..................................................................................................110
16.2 Options.............................................................................................................111
16.3 Timers...............................................................................................................114
16.4 Areas................................................................................................................116
16.5 Area Groups.....................................................................................................117
16.6 X-BUS...............................................................................................................118
16.6.1 X-BUS Addressing............................................................................118
16.6.2 XBUS Refresh...................................................................................118
16.6.3 Reconfigure.......................................................................................119
16.6.4 Keypads/Expanders/Door Controllers ..............................................120
16.6.4.1 Locate ...............................................................................................120
16.6.4.2 Monitor..............................................................................................120
16.6.4.3 Edit Keypads.....................................................................................121
16.6.4.4 Edit Expanders..................................................................................123
16.6.4.5 Edit Door Controllers.........................................................................127
16.6.5 Addressing Mode..............................................................................128
16.6.6 XBUS Type .......................................................................................129
16.6.7 Bus Retries .......................................................................................129
16.6.8 Comms Timer ...................................................................................129
16.7 Wireless............................................................................................................130
16.7.1 Add Sensors .....................................................................................130
16.7.2 Edit Sensors (Zone Assignment)......................................................131
16.7.3 Add WPA...........................................................................................131
16.7.4 Edit WPA...........................................................................................132
16.8 Zones................................................................................................................132
16.9 Doors................................................................................................................133
16.9.1 Doors.................................................................................................133

6
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
16.10 Outputs.............................................................................................................136
16.10.1 Outputs types and output ports.........................................................137
16.11 Communication.................................................................................................140
16.11.1 Serial Ports........................................................................................140
16.11.2 Ethernet Ports...................................................................................140
16.11.3 Modems ............................................................................................141
16.11.3.1Monitoring the transmission network interface .................................141
16.11.3.2Configuring Modems.........................................................................142
16.11.4 Central Station ..................................................................................143
16.11.4.1Add....................................................................................................143
16.11.4.2Edit....................................................................................................143
16.11.4.3Delete................................................................................................144
16.11.4.4Make Test Call..................................................................................144
16.11.5 Remote Maintenance........................................................................144
16.12 Test...................................................................................................................145
16.12.1 Bell Test ............................................................................................145
16.12.2 Walk Test..........................................................................................145
16.12.3 Zone Monitor.....................................................................................145
16.12.4 Output Test .......................................................................................146
16.12.5 Soak Test..........................................................................................147
16.12.6 Audible Options.................................................................................147
16.12.7 Visual Indicators................................................................................147
16.12.8 WPA Test..........................................................................................148
16.12.9 Seismic Test......................................................................................148
16.13 Utilities..............................................................................................................148
16.14 Isolate...............................................................................................................149
16.15 Event Log .........................................................................................................149
16.16 Access Log.......................................................................................................150
16.17 Alarm Log .........................................................................................................150
16.18 Change Engineer Pin .......................................................................................150
16.19 Users ................................................................................................................150
16.19.1 Add....................................................................................................151
16.19.2 Edit....................................................................................................151
16.19.2.1Access Control..................................................................................151
16.19.3 Delete................................................................................................153
16.20 User Profiles.....................................................................................................154
16.20.1 Add....................................................................................................154
16.20.2 Edit....................................................................................................154
16.20.3 Delete................................................................................................154
16.21 SMS..................................................................................................................155
16.21.1 Add....................................................................................................155
16.21.2 Edit....................................................................................................156
16.21.3 Delete................................................................................................156
16.22 X-10..................................................................................................................156
16.23 Set Date/Time...................................................................................................157
16.24 Installer Text.....................................................................................................157

7
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
16.25 Door Control.....................................................................................................157
16.26 SPC Connect....................................................................................................158
17 Engineer programming via the browser ......................................................159
17.1 System Information ..........................................................................................159
17.2 Ethernet interface.............................................................................................159
17.3 Connecting to the panel via USB .....................................................................161
17.4 Logging into the browser..................................................................................163
17.5 SPC Home........................................................................................................164
17.5.1 System Summary..............................................................................164
17.5.2 Alarms Overview...............................................................................165
17.5.3 Viewing Video ...................................................................................165
17.6 Panel status......................................................................................................167
17.6.1 Status................................................................................................167
17.6.2 X-Bus Status.....................................................................................167
17.6.2.1 Expander Status ...............................................................................168
17.6.2.2 PSU status........................................................................................170
17.6.2.3 Keypad Status...................................................................................172
17.6.2.4 Door Controller Status ......................................................................173
17.6.3 Wireless ............................................................................................175
17.6.3.1 Log - Wireless sensor X....................................................................176
17.6.4 Zones................................................................................................176
17.6.5 Doors.................................................................................................178
17.6.6 FlexC Status .....................................................................................179
17.6.7 System alerts ....................................................................................180
17.7 Logs..................................................................................................................181
17.7.1 System Log.......................................................................................181
17.7.2 Access Log .......................................................................................181
17.7.3 WPA Log...........................................................................................182
17.7.4 ALARM LOG.....................................................................................182
17.8 Users................................................................................................................183
17.8.1 Adding / Editing a User.....................................................................183
17.8.1.1 Unknown Devices .............................................................................185
17.8.2 Adding / Editing User Profiles...........................................................186
17.8.3 Configuring SMS...............................................................................190
17.8.4 SMS Commands...............................................................................191
17.8.5 Deleting Web Passwords..................................................................193
17.8.6 Configuring Engineer Settings..........................................................193
17.8.6.1 Changing Engineer PIN and web password.....................................194
17.9 Configuration....................................................................................................196
17.9.1 Configuring controller inputs & outputs.............................................196
17.9.1.1 Editing an input .................................................................................196
17.9.1.2 Editing an output...............................................................................197
17.9.1.3 Configuring system latch and auto set outputs.................................202
17.9.1.4 X10 Config - Settings........................................................................203
17.9.2 X-BUS...............................................................................................204
17.9.2.1 Expanders.........................................................................................204

8
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
17.9.2.2 Keypads ............................................................................................209
17.9.2.3 Door Controllers................................................................................214
17.9.2.4 Cable Map.........................................................................................215
17.9.2.5 Settings .............................................................................................216
17.9.3 Wireless ............................................................................................217
17.9.3.1 Log - Wireless sensor X....................................................................218
17.9.3.2 Configuring a WPA............................................................................218
17.9.3.3 Changing wireless settings ...............................................................221
17.9.4 Changing system settings.................................................................222
17.9.4.1 Options..............................................................................................222
17.9.4.2 Timers ...............................................................................................230
17.9.4.3 Identification......................................................................................233
17.9.4.4 Standards..........................................................................................234
17.9.4.5 Clock .................................................................................................235
17.9.4.6 Language ..........................................................................................236
17.9.5 Configuring zones, doors and areas.................................................237
17.9.5.1 Editing a zone ...................................................................................237
17.9.5.2 Adding / Editing an area....................................................................238
17.9.5.3 Editing a door....................................................................................246
17.9.5.4 Adding an area group .......................................................................251
17.9.6 Calendars..........................................................................................251
17.9.6.1 Adding / Editing a calendar...............................................................252
17.9.6.2 Automatic setting/unsetting of areas.................................................254
17.9.6.3 Automatic setting/unsetting of other panel operations......................254
17.9.7 Change own PIN...............................................................................255
17.9.8 Configuring advanced settings..........................................................255
17.9.8.1 Triggers.............................................................................................255
17.9.8.2 Mapping Gates..................................................................................256
17.9.8.3 Audio/Video Verification....................................................................257
17.9.8.4 Updating SPC Licenses....................................................................261
17.10 Configuring Communications ...........................................................................261
17.10.1 Communications Settings .................................................................261
17.10.1.1Configuring the networking services of the panel.............................261
17.10.1.2Ethernet.............................................................................................262
17.10.1.3Modems ............................................................................................263
17.10.1.4Serial ports........................................................................................272
17.10.2 FlexC®...............................................................................................273
17.10.2.1Operation Mode ................................................................................274
17.10.2.2Quick Start ATP Configuration for EN50136 ATS ............................274
17.10.2.3Configuring an EN50136-1 ATS or Custom ATS..............................276
17.10.2.4Configuring an SPC Connect ATS....................................................285
17.10.2.5Exporting and Importing an ATS.......................................................285
17.10.2.6Configuring Event Profiles ................................................................286
17.10.2.7Configuring Command Profiles.........................................................290
17.10.3 Reporting...........................................................................................292
17.10.3.1Alarm Reporting Centres (ARCs)......................................................292

9
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
17.10.3.2EDP Setup ........................................................................................295
17.10.4 PC Tools ...........................................................................................302
17.10.4.1SPC Pro / SPC Safe .........................................................................302
17.10.4.2SPC Manager ...................................................................................303
17.10.4.3Remote Maintenance........................................................................304
17.11 File Operations.................................................................................................304
17.11.1 File Upgrade Operations...................................................................305
17.11.1.1Upgrading Firmware .........................................................................305
17.11.1.2Upgrading Languages.......................................................................308
17.11.2 File Manager Operations ..................................................................310
17.12 Using the Fast Programmer.............................................................................311
17.12.1 Connecting the Fast Programmer to the Controller..........................312
17.12.2 Installing the Fast Programmer on a PC...........................................312
17.12.3 Fast Programmer File Operations ....................................................313
17.12.3.1Accessing the Fast Programmer using the Keypad .........................313
17.12.3.2Accessing the Fast Programmer using the Browser ........................313
18 Accessing web server remotely ...................................................................315
18.1 PSTN connection .............................................................................................315
18.2 GSM connection...............................................................................................317
19 Intruder alarm functionality...........................................................................320
19.1 Financial mode operation.................................................................................320
19.2 Commercial mode operation ............................................................................320
19.3 Domestic mode operation ................................................................................321
19.4 Full and local alarms ........................................................................................321
20 System examples and scenarios..................................................................322
20.1 When to use a common area...........................................................................322
21 Seismic Sensors.............................................................................................324
21.1 Seismic Sensor Testing....................................................................................325
21.1.1 Manual and Automatic Test Process................................................325
21.1.2 Automatically Testing Sensors .........................................................326
21.1.3 Manually Testing Sensors.................................................................327
22 Blocking Lock Operation...............................................................................328
22.1 Blocking Lock ...................................................................................................328
22.2 Authorized Setting of the Blocking Lock...........................................................329
22.3 Locking Element...............................................................................................330
23 Appendix.........................................................................................................332
23.1 Network cable connections ..............................................................................332
23.2 Controller status LEDs .....................................................................................332
23.3 Powering expanders from the auxiliary power terminals .................................333
23.4 Calculating the battery power requirements.....................................................334
23.5 Domestic, Commercial and Financial mode default settings ...........................336
23.6 Wiring of the X10 interface...............................................................................337
23.7 SIA Codes ........................................................................................................337
23.8 CID Codes........................................................................................................342
23.9 Overview of keypad types ................................................................................343

10
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
23.10 User PIN combinations.....................................................................................344
23.11 Duress PINs .....................................................................................................345
23.12 Automatic inhibits .............................................................................................345
23.12.1 Zones ................................................................................................345
23.12.2 Access PINs......................................................................................345
23.12.3 Engineer Access...............................................................................345
23.12.4 Keypad User Logoff ..........................................................................345
23.13 Wiring of mains cable to the controller .............................................................346
23.14 Maintenance controller.....................................................................................346
23.15 Maintenance Smart PSU..................................................................................347
23.16 Zone types........................................................................................................347
23.17 Zone attributes..................................................................................................350
23.18 Applicable attributes to zone types...................................................................352
23.19 ATS levels and attenuation specifications........................................................354
23.20 Supported card readers and card formats........................................................354
23.21 SPC Support for E-Bus Devices.......................................................................356
23.21.1 Configuring and Addressing E-Bus Devices.....................................356
23.21.1.1Addressing Transponders for SAP 8, SAP 14, and SAP 20.............358
23.21.1.2Addressing Transponders for PSU SAP 25......................................358
23.22 FlexC Glossary.................................................................................................359
23.23 FlexC Commands.............................................................................................360
23.24 ATS Category Timings .....................................................................................362
23.25 ATP Category Timings .....................................................................................363