Varytec LED Ball RGBW 50cm 4x8W DMX User manual

LED Ball RGBW
50cm 4x8W DMX
LED ball
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
28.06.2019, ID: 460236

Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 17
4 Installation.................................................................................................................................................. 18
5 Starting up.................................................................................................................................................. 20
6 Connections and controls................................................................................................................... 22
7 Operating.................................................................................................................................................... 27
7.1 Starting the device........................................................................................................................... 27
7.2 System settings................................................................................................................................. 27
7.3 Stand-alone mode........................................................................................................................... 35
7.4 DMX operation.................................................................................................................................. 41
7.5 Menu overview................................................................................................................................. 43
Table of contents
LED Ball RGBW 50cm 4x8W DMX 3
LED ball

7.6 Functions in 2-channel DMX mode........................................................................................... 46
7.7 Functions in 3-channel DMX mode........................................................................................... 46
7.8 Functions in 4-channel DMX mode........................................................................................... 49
7.9 Functions in 7-channel DMX mode........................................................................................... 49
7.10 Functions in 9-channel DMX mode........................................................................................ 52
7.11 Functions in 14-channel DMX mode...................................................................................... 56
8 Technical specications....................................................................................................................... 60
9 Plug and connection assignments.................................................................................................. 63
10 Troubleshooting...................................................................................................................................... 64
11 Cleaning....................................................................................................................................................... 66
12 Protecting the environment.............................................................................................................. 67
Table of contents
4LED Ball RGBW 50cm 4x8W DMX
LED ball

LED Ball RGBW 50cm 4x8W DMX 5
LED ball

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
6LED Ball RGBW 50cm 4x8W DMX
LED ball

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
LED Ball RGBW 50cm 4x8W DMX 7
LED ball

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General information
8LED Ball RGBW 50cm 4x8W DMX
LED ball

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
General information
LED Ball RGBW 50cm 4x8W DMX 9
LED ball

Warning signs Type of danger
Warning – danger zone.
General information
10 LED Ball RGBW 50cm 4x8W DMX
LED ball

2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
Intended use
Safety instructions
LED Ball RGBW 50cm 4x8W DMX 11
LED ball

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
12 LED Ball RGBW 50cm 4x8W DMX
LED ball

DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or re. If in doubt, seek advice from a registered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
LED Ball RGBW 50cm 4x8W DMX 13
LED ball

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
14 LED Ball RGBW 50cm 4x8W DMX
LED ball

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
LED Ball RGBW 50cm 4x8W DMX 15
LED ball

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
Safety instructions
16 LED Ball RGBW 50cm 4x8W DMX
LED ball

3 Features
nLED ball made of PVC, diameter: 50 cm
n2 eyelets M10 as suspension and for securing
n4 × RGBW LEDs, each 8 W
nControl via DMX (six dierent modes), included IR remote control and via buttons and dis‐
play on the unit
nMaster / Slave function
nAutomatic mode and sound control
n2 built-in programmes with selectable speed and brightness
nstatic colour macros with adjustable brightness
nideal for ambient lighting in clubs, bars and for events
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
LED Ball RGBW 50cm 4x8W DMX 17
LED ball

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device hanging from the ceiling.
Installation
18 LED Ball RGBW 50cm 4x8W DMX
LED ball

Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to rst use.
Inserting the battery into the
remote control
Installation
LED Ball RGBW 50cm 4x8W DMX 19
LED ball

5 Starting up
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Starting up
20 LED Ball RGBW 50cm 4x8W DMX
LED ball