VAUPEL 2200 K-SM User manual

OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 1
Abrasive gun
2200 K-SM
Art. no.: 22301

OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 2
Thank you very much for the trust you have placed in us and our products.
Please read the operating manual first before working with
the abrasive gun.
This operating and maintenance manual contains important information which is
necessary for the safe and trouble-free operation of your abrasive gun. For this
reason, always keep this operating manual with the abrasive gun.
General notice:
This abrasive gun was developed for certain applications. We expressly point out
that this abrasive gun must not be modified and/or used in a way that does not
correspond to its intended use.
Content:
1. Technical data ……………………………………………………………………………………... 3
2. Extent of delivery …………………………………………………………………………………….…3
3. Intended use .…………………………………………………………….……………………….…3
4. Features ……………………………………………………………………….…………………….. 3
5. Safety instructions …………………………………………………………………………………. 3
6. Intended use ……………………………………………………………………………………….. 4
7. Maintenance and care ………………………………………………………………………………. 4
8. Storage …………………………….…………………………………………………………………… 5
9. Troubleshooting …………………………………………………………………………………………5
10. Warranty terms ……………………..………………………………………………………………. 5
11. Address ……………………………………………………………………………………………………. 6
12. EC-declaration of conformity ………………………………..…………………………….. 7
13. Spare parts list ……………………………………….………………………………………………… 8

OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 3
1. Technical data
Description
2200 K-SM
Operating pressure
2-8 bar
Maximum pressure
8 bar
Container volume
1 litre
Connection thread
¼“
Compressed air connection
Quick coupling
Jet adjustment
yes
Measurement 2000 KSM
approx. 245 x 220 x 125 mm
Net weight
approx. 725 g
Gross weight
approx. 974 g
Required air quality
Filtered and condensate-free
2. Extent of delivery
Abrasive gun, plastic container, operating manual
3. Intended use
This abrasive gun in light design is a compressed air operated tool for manual
use. It is suitable for processing abrasives.
4. Features
The effectiveness of the 2200 K-SM abrasive gun is based on the Venturi effect.
For this purpose, an air stream is used which accelerates as it flows through the
air nozzle and thus generates negative pressure in the adjoining riser pipe. The
abrasive is thereby sucked in and sprayed out via the nozzle by the air flow.
5. Safety instructions
Protect yourself and the environment by taking appropriate precautions against
the risk of accidents and observe the following instructions in your own inter-
est:
•The operator must ensure proper operation.
•Do not bring compressed air and abrasives in contact with skin
or eyes.
•Keep children and pets away from the operating area.
•Never direct abrasive at animals, people or yourself.
•No manipulations, emergency repairs or misappropriation
may be carried out on the gun.
•Abrasive guns may only be operated and maintained by in-
structed persons.
•Repairs must only be carried out by qualified persons.
The following applies to all maintenance and repair work:

OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 4
•It is essential to disconnect the abrasive gun from the com-
pressed air connection.
•Only use original spare parts.
•The maximum working pressure must not be exceeded (see
point 1 "Technical data"). The working pressure must be ad-
justed via a (filter) pressure reducer.
•Only use compressed air as energy source.
•The compressed air connection may only be made via a quick
coupling.
•When working with the abrasive gun, wear the necessary pro-
tective clothing, goggles, work gloves, ear protection if neces-
sary and a respirator mask.
•If there are leaks in the device or other operating faults, the
device must be disconnected from the compressed air supply
immediately and the cause of the fault must be eliminated.
•Residues of abrasives and cleaning agents must be disposed of
in accordance with environmental regulations.
•The disposal of the compressed air device must be carried out
according to the valid legal regulations.
6. Installation
Unscrew the plastic container and fill it with the material to be processed. Then
hand-tighten the abrasive gun with the mounted container lid. Take care not to
overtighten the thread!
Connect the gun to the compressed air supply via the quick coupling. By press-
ing the trigger you put the abrasive gun into operation.
The spray pattern can be influenced by the following factors:
•Distance between abrasive nozzle and object
•Angle of the gun to the object
•By adjusting the hardened abrasive pipe
7. Maintenance and care
After each use, disconnect the device from the compressed air supply and thor-
oughly clean it. We recommend benzine or commercially available terpene-
based cleaners. Do not use aggressive cleaners! Following the maintenance in-
structions will ensure a long service life and trouble-free operation of this qual-
ity product.
Attention:
Pay attention to a proper disposal of the residues, which arise
during the maintenance and care.

OPERATING MANUAL 2200 K-SM V3.4/20-EN
Page | 5
8. Storage
The compressed air tool must be stored under the following conditions:
•Remove residual material from the container.
•Carefully clean the abrasive gun after each use.
•Store in a dry and dust-free place.
•Do not expose to liquids and/or aggressive chemicals.
•Keep out of the reach of children.
9. Troubleshooting
In all cases of malfunction, please check first whether there is sufficient com-
pressed air available and whether the abrasive is dissolved/absorbent.
•Gun sprays messy:
Possible cause: Abrasive media pipe, riser pipe or vent hole dirty.
Solution: Clean parts.
•Gun does not spray any material:
Possible cause: Riser pipe/abrasive media pipe blocked; grain size of the
abrasive too large.
Solution: Clean clogged parts; use suitable grain size.
•Air escapes from the spray nozzle even though the trigger is in its initial
position:
Possible cause: Valve bolt is jammed.
Solution: Pour oil onto the valve bolt and/or into the compressed air intake.
Operate the trigger several times.
10. Warranty terms
The basis for all warranty claims is the complete abrasive gun and the proof of
purchase. Damage caused by improper handling of the abrasive gun is not cov-
ered by the warranty.
If you have any questions, please indicate the type designation or the article
number of the abrasive gun.
•In conformity with legal regulations, you receive a 24-month warranty on all
products against material and manufacturing defects.
Excluded from the warranty:
•Wear parts.
•Damage caused by improper use.
•Damage caused by lack of maintenance.
•Damage caused by dirt.
•Damage caused by untreated compressed air.
If warranty claims are made, the abrasive gun must be in its original condition.