Vauth-Sagel BUILT-IN IRONING BOARD User manual

BUILT-IN IRONING BOARD
01 / 2004 / 011
Cabinet size
width min : 400 mm - 500 mm
depth min : 510 mm
height min : 120 mm
Description
itting : RAL 9010 white
Ironing Board : Full Extension

1Assembling the cabinet
guide slide “left / right“
The guide slides a e to be
positioned in such a way that
the e a e 34 mm between the
cabinet f ont edge and the
middle hole of the slide; and
f om the cabinet uppe edge
to the middle hole of the slides,
the e should be 74 mm with a
wo k a ea stength of 30 mm
(wo k plate a ea 40 mm =
64 mm) (see diag am A).
asteners:
counte sunk sc ews 4.5 x 15
2Assembling guide slide
“left / right“
Push the guide with the
suppo t b acket ac oss the
mounted cabinet slide.
3Assembling Ironing Board
on the Support Bracket
The boa d is placed in the
middle of the suppo t b acket.
Place the angle suppo t on the
f ont suppo t b acket. Sc ew
the I oning boa d and the
angle suppo t b acket f om
unde neath on the suppo t
b acket in the f ont and back.
asteners:
Cylinde head sc ews M 6.0
Washe s
Sc ew nut M 6.0
Note:
Make su e the slide
movement in smooth
befo e fi mly tightening
all sc ews.
41634
32 X
2h
(h)
30e
40e
X
74
64
counte sunk sc ews
4.5 x 15
cabinet guide slide
cabinet guide slide
guide with slide with suppo t b acket
wo k a ea diag am A
cabinet side left / ight
sc ew on f ontside
suppo t b acket
i oning boa d
Cylinde head sc ews M 6.0
guide side
i oning boa d
Cylinde head
sc ews M 6.0
guide side
sc ew on backside
suppo t b acket
angle suppo t
b acket

4Assembling “frontis plate“
Attach the “f ontis plate“ as
indicated in diag am B.
asteners:
panhead sc ews 4.0 x 16
5Assembling angle support
bracket with the board to
the frontis plate:
sc ew the angle suppo t
b acket onto the f ontis plate.
asteners:
panhead sc ews 4.0 x 16
50
400 (450)
304 (354)
Y
11
32
50
32
X
194
diag am B
X = 44 + doo cushion face
Y = 32 + doo cushion face
f ontis plate
guide side
suppo t b acket
suppo t b acket
angle
suppo t b acket
guide side
i oning boa d
f ontis plate
We reserve the right to make technical changes and to improve product specifications.
Vauth-Sagel SYSTEMTECH IK
GmbH & Co.KG
eue Straße 27
D-33034 Brakel-Erkeln
Tel. [phone]
Fax. [phone]
www.vauth-sagel.de
e-mail: [e-mail]