Vauth-Sagel DUOPORT BRS Series User manual

DUOPORT BRS
01 / 2004 / 009
Cabinet size
width : 300 mm
depth min : 290 mm (clear inner depth)
adjustable post ± 40 mm
Installation measu ements
heights:
BRS 1 490 mm - 540 mm
BRS 2 600 mm - 650 mm
BRS 3 750 mm - 800 mm
BRS 4 800 mm - 850 mm
BRS 5 850 mm - 900 mm
BRS 6 900 mm - 950 mm
Desc iption
Fitting : RAL 9006 ilver, clear varni h
Baskets : chrome
RAL 9006 ilver, clear varni h
basket diamete : ø 230 mm

1Assembly of the “bottom“
guide slide
The guide lide (ball-bearing)
i crewed to the floor board
17 mm from the cabinet front
edge and 10 mm (depending
on door trike left / right) from
the middle to the middle of the
1 t drill hole of the guide lide.
Fastene s:
counter unk crew 4.0 x 16
Now place the leeve pacer
(bra ) on the threaded tud .
Then nap the pla tic cover
over it.
2Assembly of the “uppe “
guide slide
The guide lide (ball-bearing)
i crewed to the ceiling board
17 mm from the cabinet front
edge and 10 mm (depending
on door trike left / right) from
the middle to the middle of the
1 t drill hole of the guide lide.
Fastene s:
counter unk crew 4.0 x 16
Then nap the pla tic cover
over it.
3Assembly of the
d ive “top / bottom“
The upport for the driver
are to be placed in uch a
manner (u ing 110 degree
hinge ) that from the cabinet
edge hinge tothe middle of the
1 t crew hole there are
84 mm.
The di tance of the cabinet
edge door “top“ or “bottom“
amount to 17 mm +
door trike.
Fastene s:
counter unk crew 4.0 x 16
17 32 182 32
144 (141)
16 (19)
10
84 mm
guide lide upper
threaded tud
pla tic cover
leeve pacer (bra )
counter unk crew 4.0 x 16
cabinet front edge
cabinet width 300
hinge left
guide lide lower
pla tic cover
counter unk crew 4.0 x 16
counter unk crew
4.0 x 16
counter unk crew
4.0 x 16
driver
driver Halter
upport
door
17 mm +
door trike
door top
door bottom
upport

4Assembly of the “uppe “
post suppo t b acket
Place the po t upport bracket
on top of the po t.
5Assembly of the “lowe “
post suppo t b acket
Place the po t upport bracket
onto the lower guide lide and
crew to the front threaded
tud u ing leeve crew
M 5.0 x 10. Now place the
driver onto the back. threaded
tud, in ert bra leeve, and
u ing leeve crew M 5.0 x 15,
tighten it down.
Fastene s:
Wa her
Sleeve crew M 5.0 x 10
Sleeve crew M 5.0 x 15
Bra leeve
6Assembly of the “uppe “
post suppo t b acket
Pu h the po t upport bracket
to the upper guide lide and
u ing leeve crew M 5.0 x 15
crew onto the front threaded
tud. Now place the driver
onto the back threaded tud,
in ert bra leeve, and
tighten u ing leeve crew
M 5.0 x 20. Tighten the et
crew on the po t upport
bracket.
Fastene s:
Sleeve crew M 5.0 x 15
Sleeve crew M 5.0 x 20
Bra leeve
17 32 182 32
144 (141)
16 (19)
10
cabinet width 300
leeve crew M 5.0 x 10
driver
cabinet front edge
po t upport bracket top
po t
po t upport
bracket
bra leeve
wa her
leeve crew M 5.0 x 15
driver
bra leeve
leeve crew M 5.0 x 20
et crew for po t
po t upport bracket
leeve crew
M 5.0 x 15
hinge right
We reserve the right to make technical changes and to improve product specifications.
Vauth-Sagel SYSTEMTECH IK
GmbH & Co.KG
eue Straße 27
D-33034 Brakel-Erkeln
Tel. [phone]
Fax. [phone]
www.vauth-sagel.de
e-mail: [e-mail]