Vega VEGAPOINT 31 User manual

Operating Instructions
Capacitive level switch
VEGAPOINT 31
Transistor with IO-Link
Document ID: 62325

2
Contents
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
Contents
1 About this document ............................................................................................................... 4
1.1 Function ........................................................................................................................... 4
1.2 Target group ..................................................................................................................... 4
1.3 Symbols used................................................................................................................... 4
2 For your safety ......................................................................................................................... 5
2.1 Authorised personnel ....................................................................................................... 5
2.2 Appropriate use................................................................................................................ 5
2.3 Warning about incorrect use............................................................................................. 5
2.4 General safety instructions............................................................................................... 5
2.5 Installation and operation in the USA and Canada ........................................................... 5
2.6 Safety instructions for Ex areas ........................................................................................ 6
3 Product description ................................................................................................................. 7
3.1 Conguration.................................................................................................................... 7
3.2 Principle of operation........................................................................................................ 8
3.3 Adjustment....................................................................................................................... 9
3.4 Packaging, transport and storage................................................................................... 10
3.5 Accessories.................................................................................................................... 11
4 Mounting................................................................................................................................. 12
4.1 General instructions ....................................................................................................... 12
4.2 Mounting instructions ..................................................................................................... 13
5 Connecting to power supply................................................................................................. 15
5.1 Preparing the connection ............................................................................................... 15
5.2 Connecting..................................................................................................................... 15
5.3 Wiring plan ..................................................................................................................... 16
5.4 Switch-on phase............................................................................................................. 16
6 Access protection.................................................................................................................. 17
6.1 Bluetooth radio interface ................................................................................................ 17
6.2 Protection of the parameterization.................................................................................. 17
6.3 Storing the codes in myVEGA........................................................................................ 18
7 Setup ....................................................................................................................................... 19
7.1 Indication of the switching status.................................................................................... 19
7.2 Function table................................................................................................................. 19
7.3 Menu overview............................................................................................................... 19
7.4 Parameter adjustment .................................................................................................... 21
8 Setup with smartphone/tablet (Bluetooth).......................................................................... 29
8.1 Preparations................................................................................................................... 29
8.2 Connecting..................................................................................................................... 29
8.3 Sensor parameter adjustment........................................................................................ 30
9 Setup with PC/notebook (Bluetooth)................................................................................... 31
9.1 Preparations................................................................................................................... 31
9.2 Connecting..................................................................................................................... 31
9.3 Sensor parameter adjustment........................................................................................ 32
10 Diagnostics and servicing .................................................................................................... 33
10.1 Maintenance .................................................................................................................. 33

3
Contents
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
10.2 Rectify faults................................................................................................................... 33
10.3 Diagnosis, fault messages ............................................................................................. 34
10.4 Status messages according to NE 107 .......................................................................... 34
10.5 Software update ............................................................................................................. 36
10.6 How to proceed if a repair is necessary.......................................................................... 36
11 Dismount................................................................................................................................. 37
11.1 Dismounting steps.......................................................................................................... 37
11.2 Disposal ......................................................................................................................... 37
12 Certicatesandapprovals.................................................................................................... 38
12.1 Radio licenses................................................................................................................ 38
12.2 Foodandpharmaceuticalcerticates............................................................................. 38
12.3 EU conformity................................................................................................................. 38
12.4 Environment management system ................................................................................. 38
13 Supplement ............................................................................................................................ 39
13.1 Technical data ................................................................................................................ 39
13.2 Device communication IO-Link....................................................................................... 42
13.3 Maße.............................................................................................................................. 48
13.4 Industrial property rights................................................................................................. 50
13.5 Licensing information for open source software ............................................................. 50
13.6 Trademark ...................................................................................................................... 50
Editing status: 2021-02-08

4
1 About this document
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
1 About this document
1.1 Function
This instruction provides all the information you need for mounting,
connection and setup as well as important instructions for mainte-
nance,faultrectication,theexchangeofpartsandthesafetyofthe
user. Please read this information before putting the instrument into
operation and keep this manual accessible in the immediate vicinity
of the device.
1.2 Target group
This operating instructions manual is directed to trained personnel.
Thecontentsofthismanualmustbemadeavailabletothequalied
personnel and implemented.
1.3 Symbols used
Document ID
This symbol on the front page of this instruction refers to the Docu-
ment ID. By entering the Document ID on www.vega.com you will
reach the document download.
Information, note, tip: This symbol indicates helpful additional infor-
mation and tips for successful work.
Note: This symbol indicates notes to prevent failures, malfunctions,
damage to devices or plants.
Caution: Non-observance of the information marked with this symbol
may result in personal injury.
Warning: Non-observance of the information marked with this symbol
may result in serious or fatal personal injury.
Danger: Non-observance of the information marked with this symbol
results in serious or fatal personal injury.
Ex applications
This symbol indicates special instructions for Ex applications.
• List
The dot set in front indicates a list with no implied sequence.
1 Sequence of actions
Numbers set in front indicate successive steps in a procedure.
Battery disposal
This symbol indicates special information about the disposal of bat-
teries and accumulators.

5
2 For your safety
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
2 For your safety
2.1 Authorised personnel
All operations described in this documentation must be carried out
onlybytrained,qualiedpersonnelauthorisedbytheplantoperator.
During work on and with the device, the required personal protective
equipment must always be worn.
2.2 Appropriate use
The VEGAPOINT 31 is a sensor for point level detection.
Youcannddetailedinformationabouttheareaofapplicationin
chapter " Product description".
Operational reliability is ensured only if the instrument is properly
usedaccordingtothespecicationsintheoperatinginstructions
manual as well as possible supplementary instructions.
2.3 Warning about incorrect use
Inappropriate or incorrect use of this product can give rise to applica-
tion-specichazards,e.g.vesseloverllthroughincorrectmounting
or adjustment. Damage to property and persons or environmental
contamination can result. Also, the protective characteristics of the
instrument can be impaired.
2.4 General safety instructions
This is a state-of-the-art instrument complying with all prevailing
regulations and directives.The instrument must only be operated in a
technicallyawlessandreliablecondition.Theoperatorisresponsi-
ble for the trouble-free operation of the instrument.When measuring
aggressive or corrosive media that can cause a dangerous situation
if the instrument malfunctions, the operator has to implement suitable
measures to make sure the instrument is functioning properly.
The safety instructions in this operating instructions manual, the na-
tional installation standards as well as the valid safety regulations and
accident prevention rules must be observed by the user.
For safety and warranty reasons, any invasive work on the device
beyond that described in the operating instructions manual may be
carried out only by personnel authorised by the manufacturer. Arbi-
traryconversionsormodicationsareexplicitlyforbidden.Forsafety
reasons,onlytheaccessoryspeciedbythemanufacturermustbe
used.
To avoid any danger, the safety approval markings and safety tips on
the device must also be observed.
2.5 Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.

6
2 For your safety
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code
A Class 2 power supply unit has to be used for the installation in the
USA and Canada.
2.6 Safety instructions for Ex areas
For Ex applications, only devices with corresponding Ex approval may
beused.ObservetheEx-specicsafetyinstructions.Thesearean
integral part of the operating instructions and are enclosed with every
device with Ex approval.

7
3 Product description
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
3 Product description
3.1 Conguration
The scope of delivery encompasses:
• VEGAPOINT 31 point level switch
• Information sheet " Documents and software" with:
– Instrument serial number
– QR code with link for direct scanning
• Information sheet " PINs and Codes" (with Bluetooth versions)
with:
– Bluetooth access code
Note:
Optional instrument features are also described in this operating
instructions manual.The respective scope of delivery results from the
orderspecication.
This operating instructions manual applies to the following instrument
versions:
• Hardware version from 1.0.0
• Software version from 1.3.0
The VEGAPOINT 31 consists of the components:
• Housing with integrated electronics
• Processtting
• Plug (optional)
1
2
3
4
5
Fig. 1: VEGAPOINT 31
1 LED illuminated ring
2 Instrument housing
3 Processtting
4 Sensor
5 Plug connection
Youwillndthetypeplateonthesensorhousing.
Thetypelabelcontainsthemostimportantdataforidenticationand
use of the instrument.
Scope of delivery
Scope of this operating
instructions
Constituent parts
Type label

8
3 Product description
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
VEGAPOINT
s/n 1234567CP / 222 3JA
IP66/67/69, TYPE 6P
MWP 25bar (2500kPa)
PEEK, EPDM, 316L
2020
www.vega.com
D-77761 SCHILTACH,
Made in Germany
12...35V 1W
PNP/NPN 250mA IO-Link
0044
2
4
1
3
(out 2)
(out 1)
+
-
5
6
7
8
9
10
12
11
1
13
4
2
3
123456
Fig. 2: Layout of the type label (example)
1 Order number
2 Approvals (option)
3 Warning instructions
4 Voltage supply and signal output
5 Protection rating
6 Permissible process pressure
7 Material, wetted parts
8 Connection diagram
9 QR code for device documentation
10 Conformities and approvals (optional)
11 Bluetooth access code
12 Serial number
13 Product name
Move to " www.vega.com"andenterinthesearcheldtheserial
number of your instrument.
Thereyoucanndthefollowinginformationabouttheinstrument:
• Order data
• Documentation
• Software
Alternatively,youcanndallviayoursmartphone:
• Scan the QR-code on the type label of the device or
• Enter serial number manually in the VEGA Tools app (available
free of charge in the respective stores)
3.2 Principle of operation
Der VEGAPOINT 31 ist ein kapazitiver Grenzstandsensor zur Grenz-
standerfassung.
Er ist konzipiert für industrielle Einsätze in allen Bereichen der Ver-
fahrenstechnik und kann in leichten, feinen Schüttgütern eingesetzt
werden.
Documents and software
Anwendungsbereich

9
3 Product description
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
Typische Anwendungen sind Überlauf- und Trockenlaufschutz. Durch
sein einfaches und robustes Messsystem lässt sich der VEGAPOINT
31 in nahezu allen pulverförmigen Schüttgütern einsetzen.
Funktionsüberwachung
Der Elektronikeinsatz des VEGAPOINT 31 überwacht über die Fre-
quenzerzeugung kontinuierlich folgende Kriterien:
• Ausfall der Signalerzeugung
• Leitungsbruch zum Sensorelement
Wird eine Funktionsstörung erkannt oder fällt die Spannungsver-
sorgungaus,sonimmtdieElektronikeinendeniertenSchaltzustand
an,d.h.derAusgangistgeönet(sichererZustand).
Analternatingelectriceldisgeneratedatthetipofthemeasur-
ing electrode. If the sensor is covered with medium, the resonance
frequency changes.This change is detected by the electronics and
converted into a switching command.
Buildupisignoredtoacertaindegreeandthereforehasnoinuence
on the measurement.
3.3 Adjustment
The switching status of VEGAPOINT 31 can be checked from outside
(LED illuminated ring).
Note:
The LED illuminated ring is not available for device versions with full
metal housing.
The optionally integrated Bluetooth module enables in addition a wire-
less adjustment of VEGAPOINT 31. 1)
This is done via standard operating devices:
• Smartphone/tablet (iOS or Android operating system)
• PC/notebook with Bluetooth LE or Bluetooth USB adapter (Win-
dows operating system)
Functional principle
Local adjustment
Wireless adjustment
1) ReducedeectiverangewithM12x1plugstainlesssteel(closedfullmetal
housing), see chapter "Technical Data"

10
3 Product description
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
3
2
4
1
Fig. 3: Wireless connection to standard adjustment devices with integrated
Bluetooth LE or alternatively Bluetooth USB adapter.
1 Sensor
2 Smartphone/Tablet
3 PC/Notebook
4 Bluetooth USB adapter
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging consists of environment-friendly, recyclable card-
board. For special versions, PE foam or PE foil is also used. Dispose
of the packaging material via specialised recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
• Not in the open
• Dry and dust free
• Not exposed to corrosive media
• Protected against solar radiation
• Avoiding mechanical shock and vibration
Packaging
Transport
Transport inspection
Storage

11
3 Product description
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
• Storage and transport temperature see chapter " Supplement -
Technical data - Ambient conditions"
• Relative humidity 20 … 85 %
3.5 Accessories
The instructions for the listed accessories can be found in the down-
load area on our homepage.
Various threaded and hygienic sockets are available for devices with
threaded version.
Youcanndfurtherinformationinthe"Technicaldata"
BeiGerätenmitStaub-Ex-ZulassungmussdasGehäusevoräußerer
Beschädigung geschützt werden.
Verwenden Sie dazu die optionale Schutzhaube.
Storage and transport
temperature
Threaded and hygienic
socket
Schutzhaube

12
4 Mounting
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
4 Mounting
4.1 General instructions
The instrument is suitable for standard and extended ambient condi-
tions acc. to DIN/EN/IEC/ANSI/ISA/UL/CSA 61010-1. It can be used
indoors as well as outdoors.
Note:
For safety reasons, the instrument must only be operated within the
permissibleprocessconditions.Youcannddetailedinformationon
the process conditions in chapter " Technical data" of the operating
instructions or on the type label.
Hence make sure before mounting that all parts of the instrument ex-
posed to the process are suitable for the existing process conditions.
These are mainly:
• Active measuring component
• Processtting
• Process seal
Process conditions in particular are:
• Process pressure
• Process temperature
• Chemical properties of the medium
• Abrasionandmechanicalinuences
Der VEGAPOINT 31 kann in jeder beliebigen Lage eingebaut werden.
Das Gerät muss lediglich so montiert werden, dass sich der Sensor
aufHöhedesgewünschtenSchaltpunktesbendet.
1
3
2
Fig. 4: Einbaubeispiele
1 Obere Füllstandsdetektion (max.) als Überlaufschutz
2 Untere Füllstandsdetektion (min.) als Trockenlaufschutz
3 Trockenlaufschutz (min.) für eine Pumpe
Ambient conditions
Process conditions
Schaltpunkt

13
4 Mounting
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
Beachten Sie, dass der Schaltpunkt je nach Art des Mediums und der
Einbaulage des Sensors variiert.
Protect your instrument against moisture ingress through the following
measures:
• Use a suitable connection cable (see chapter " Connecting to
power supply")
• Tighten the cable gland or plug connector
• Lead the connection cable downward in front of the cable entry or
plug connector
This applies mainly to outdoor installations, in areas where high
humidity is expected (e.g. through cleaning processes) and on cooled
or heated vessels.
The level switch is a measuring device for stationary screw mounting
and must be treated accordingly. Damage to the measuring tip will
destroy the instrument.
Use the hexagon above the thread for screwing in.
Aftermounting,makesurethattheprocessttingisscrewedincor-
rectly and thus securely seals even at maximum process pressure.
4.2 Mounting instructions
IfVEGAPOINT31ismountedinthellingstream,unwantedfalse
measurement signals can be generated. For this reason, mount VE-
GAPOINT 31 at a position in the vessel where no disturbances, e.g.
fromllingopenings,agitators,etc.,canoccur.
BeiGerätenmitStaub-Ex-ZulassungmussdasGehäusevoräußerer
Beschädigung geschützt werden.
Verwenden Sie dazu die optionale Schutzhaube.
Schrauben Sie das Anschlusskabel mit dem Stecker auf das
Gerät und führen Sie das Kabel seitlich oder nach oben durch die
Schutzhaube.
Setzen Sie die Schutzhaube gemäß folgender Abbildung um das
Gerätegehäuse und befestigen Sie die beiden Hälften mit den beilieg-
enden Schrauben (1 Nm/0.74 lb ft).
Protection against mois-
ture
Handling
Inowingmedium
Schutzhaube

14
4 Mounting
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
4
12
3
Fig. 5: Montage der Schutzhaube
1 Schutzhaube - 1. Hälfte
2 Schutzhaube - 2. Hälfte
3 Befestigungsschrauben (2 Stück)
4 VEGAPOINT 31

15
5 Connecting to power supply
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
5 Connecting to power supply
5.1 Preparing the connection
Always keep in mind the following safety instructions:
• Carryoutelectricalconnectionbytrained,qualiedpersonnel
authorised by the plant operator
• If overvoltage surges are expected, overvoltage arresters should
be installed
Warning:
Only connect or disconnect in de-energized state.
Thedataforpowersupplyarespeciedinchapter"Technical data".
Note:
Power the instrument via an energy-limited circuit (power max. 100 W)
acc. to IEC 61010-1, e.g.
• Class 2 power supply unit (acc. to UL1310)
• SELV power supply unit (safety extra-low voltage) with suitable
internal or external limitation of the output current
Keepinmindthefollowingadditionalfactorsthatinuencetheoperat-
ing voltage:
• Lower output voltage of the power supply unit under nominal load
• Inuenceofadditionalinstrumentsinthecircuit(seeloadvaluesin
chapter " Technical data")
The instrument is connected with standard four-wire cable. If electro-
magnetic interference is expected which is above the test values of
EN 61326-1 for industrial areas, shielded cable should be used.
5.2 Connecting
3
1 2
Fig. 6: Instrument versions
1 Device version with housing 316L and plastic
2 Device version with full metal housing 316L
3 360° status indication
Safety instructions
Voltage supply
Connection cable
Instrument versions

16
5 Connecting to power supply
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
This plug connection requires a prefabricated cable with plug. De-
pending on the version, protection IP66/IP67 or IP68 (0.2 bar) or IP69.
5.3 Wiring plan
For connection to binary inputs of a PLC.
3
2
3
2
out 2
out 1
+
-
1
2
4
1
3
Fig. 7: Wiring plan M12 x 1 plug - Transistor output, three-wire
1 Voltage supply
2 PNP switching
3 NPN switching
Contact, plug connector Function/Polarity
1 Voltage supply/+
2 Transistor output 2
3 Voltage supply/-
4 Transistor output 1/IO-Link
5.4 Switch-on phase
Afterswitchingon,thedevicerstcarriesoutaself-testinwhichthe
function of the electronics is checked.
The current measured value is then output on the signal cable.
M12 x 1 plug connection
M12 x 1 plug

17
6 Access protection
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
6 Access protection
6.1 Bluetooth radio interface
Devices with a Bluetooth radio interface are protected against un-
wanted access from outside.This means that only authorized persons
can receive measured and status values and change device settings
via this interface.
A Bluetooth access code is required to establish Bluetooth com-
munication via the adjustment tool (smartphone/tablet/notebook).
This code must be entered once when Bluetooth communication is
establishedforthersttimeintheadjustmenttool.Itisthenstoredin
the adjustment tool and does not have to be entered again.
The Bluetooth access code is individual for each device. It is printed
on the device housing and is also supplied with the device in the infor-
mation sheet " PINs and Codes". It can be changed by the user after
therstconnectionhasbeenestablished.IftheBluetoothaccess
code has not been entered correctly, a new entry can only be made
after a waiting period has elapsed.The waiting time increases with
each additional incorrect entry.
The emergency Bluetooth access code enables Bluetooth communi-
cation to be established in the event that the Bluetooth access code
is no longer known. It can't be changed.The emergency Bluetooth
access code can be found in information sheet " Access protection".
If this document is lost, the emergency Bluetooth access code can
be retrieved from your personal contact person after legitimation.
The storage and transmission of Bluetooth access codes is always
encrypted (SHA 256 algorithm).
6.2 Protection of the parameterization
The settings (parameters) of the device can be protected against un-
wanted changes. The parameter protection is deactivated on delivery,
all settings can be made.
To protect the parameterization, the device can be locked by the user
with the aid of a freely selectable device code.The settings (param-
eters) can then only be read out, but not changed.The device code
is also stored in the adjustment tool. However, unlike the Bluetooth
access code, it must be re-entered for each unlock.When using the
adjustment app or DTM, the stored device code is then suggested to
the user for unlocking.
The emergency device code allows unlocking the device in case the
device code is no longer known. It can't be changed. The emergency
device code can also be found on the supplied information sheet " Ac-
cess protection". If this document is lost, the emergency device code
can be retrieved from your personal contact person after legitimation.
The storage and transmission of the device codes is always encrypt-
ed (SHA 256 algorithm).
Bluetooth access code
Emergency Bluetooth
unlock code
Device code
Emergency device code

18
6 Access protection
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
6.3 Storing the codes in myVEGA
If the user has a " myVEGA" account, then the Bluetooth access code
as well as the device code are additionally stored in his account under
" PINs and Codes".Thisgreatlysimpliestheuseofadditionaladjust-
ment tools, as all Bluetooth access and device codes are automati-
cally synchronized when connected to the " myVEGA" account

19
7 Setup
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
7 Setup
7.1 Indication of the switching status
The switching status of the electronics can be checked via the 360°
status indication (LEDs) integrated in the upper part of the housing.
The colours of the 360° status indication have the following meaning:
2)
• Green lights up - power supply connected, sensor output high-
impedance
• Greenashing-Maintenancerequired
• Yellow lights up - power supply connected, sensor output low
impedance
• Red lights - shortcircuit or overload in the load circuit (sensor
output high-impedance)
• Redashing-Erroratsensororelectronics(sensoroutputhigh
impedance) or device is in simulation
7.2 Function table
The following table provides an overview of the switching conditions
depending on the set mode and the level (factory setting).
The colours of the signal lamp correspond to the signalling according
to NAMUR NE 107.
Coverage Switching sta-
tus 3)
Output 1
Switching sta-
tus 4)
Output 2
360° status indi-
cation 5)
Covered open closed Green
Uncovered closed open Yellow
Fault
(Covered/Uncov-
ered)
open open Red
7.3 Menu overview
There are several ways to operate the device.
The Bluetooth version (optional) of the instrument enables a wireless
connection to standard adjustment units.This can be smartphones/
Adjustment possibilities
2) Default setting
3) Default setting
4) Default setting
5) Output 1

20
7 Setup
VEGAPOINT 31 • Transistor with IO-Link
62325-EN-210210
tablets with iOS or Android operating system or PCs with PACTware
and Bluetooth USB adapter.
The following functional descriptions apply to all adjustment devices
(smartphone, tablet, laptop …).
For technical reasons, individual functions are not available on all
devices.Youcanndinformationonthisinthefunctiondescription.
The adjustment menu is divided into three sections:
Main menu: Measurement loop name, application etc.
Extended functions: Output, switching output, display, reset etc.
Diagnosis: Status, pointer function, simulation, sensor information
etc.
Note:
Please note that individual menu items are only optionally available or
depend on the settings in other menu items.
Menu item Function Default value
Measurement loop name Free naming of the device Sensor
Application Selection of the application Standard
Adjustment with medium 6) Media adjustment Accept current device status
Menüpunkt Funktion Defaultwert
Ausgang Transistorfunktion PNP
Funktion Ausgang (OU1) Öner(HNC)
Funktion Ausgang 2 (OU2) Schließer (HNO)
Schaltausgang Schaltpunkt (SP1) 85 %
Schaltverzögerung (DS1) 0,5 s
Rückschaltpunkt (RP1) 83 %
Rückschaltverzögerung (DR1) 0,5 s
Schaltausgang 2 Schaltpunkt (SP2) 85 %
Schaltverzögerung (DS2) 0,5 s
Rückschaltpunkt (RP2) 83 %
Rückschaltverzögerung (DR2) 0,5 s
Anzeige Helligkeit LED-Leuchtring 100 %
Signalisierung NAMUR NE 107
Störung Rot
Schaltausgang Gelb
Betriebszustand Grün
General information
Main menu
Erweiterte Funktionen
6) Onlyfor"User-dened"application