Velleman PCSU1000 Mounting instructions

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
1
Installation of Software / Driver for PCSU1000_Windows 10 32 – 64 Bit.
Installation Software “PcLab2000SE”
1) Download the software from this our site:
htt s://www.velleman.eu/downloads/files/downloads/ clab2000se_v4_05_setu .zi
2) Unzi (extract) the downloaded setu file.
3) Install the software in normal way and follow the instructions of installation wizard.
Installation driver for PCSU1000:
1) Download the driver from our site and save it to:
“Downloads” folder”: C:\Users\”your user name”\Downloads l
link: htt s://www.velleman.eu/downloads/files/downloads/ csu1000_driver_2_04_16.zi
2) Unzi the file to “Downloads” folder: C:\Users\”your user name”\Downloads
3) Connect the PCSU1000 onto a free USB ort of com uter.
4) Reboot the com uter in “Driver enforcement mode” for installing unsigned drivers.
a. Hold shift key ressed while you click on “Restart”.
b. Once your com uter has rebooted, you’ll be able to choose the Troubleshoot o tion.

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
2
c. Choose Advanced options.
d. Choose Startup Settings.
e. Since we are modifying boot time configuration settings, you will need to restart your
Computer one last time. Finally, you will be given a list of startup settings that you
can change. The one we are looking for is “Disable driver signature enforcement”. To
choose the setting, you will need to press the F7 key.
our PC will then reboot and you will be able to install unsigned drivers without any
error message.

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
3
5) O en “Control Panel” and navigate to “Device anager”.
*) Right click on Start button and choose Control anel

Device manager.
*) or ress Windows key + R => type in: devmgmt.mcs and click OK, to open device manager.
*) or click windows key (start button) => navigate to Windows System => click on Control
anel and click Device Manager.
In this driver list, you’ll find a Yellow exclamation mark at (Other devices): PCSU1000.

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
4
6) Give a right click onto PCSU1000. A follow window a ears. And choose Update Driver
Software (left click).

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
5
7) Browse on com uter where the driver is located. Choose “Browse my computer for driver
software.
a. Click on Browse button. And navigate to driver location.

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
6
b. Browse to driver location: C:\Users\”your user name”\Downloads, and click OK.
c. Click on Next button.

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
7
8) A “Windows Security” window a ears and choose: “Install this driver software anyway.
a. The driver will start to install.
9) After installing, a message a ears: “Windows has successfully updated your driver
software”. And click on close button.

Legen Heirweg 33
9890 Gavere, Belgium
October 13, 2017
8
10) In the device manager list, you’ll see that driver for PCSU1000 are successfully installed and
yellow exclamation mark is disa eared. Driver installation is com lete.
11) Close Device manager.
12) Reboot the com uter.
13) After Reboot, start the software: PcLab2000SE.
14) Then calibrate the sco e: File => Calibrate & exit.
15) Restart the software. Now the PCSU1000 is ready to use.
Best regards,
Velleman Repair-+-+-+-
Re air De artment
Velleman nv | Legen Heirweg 33 | 9890 Gavere | Belgium (Euro e)